Beruflich Dokumente
Kultur Dokumente
com Page 1 of 20
Page 1 of 1
how can I install SCCM 2007 sp1 in Windows Server 2008 a step by step guide
anyweb
Posted 08 May 2008 - 07:18 AM
Please note that this guide is designed to get you up and running with SCCM in a LAB Environment as
quickly as possible, so server roles are not going to be separated unless otherwise stated. This guide is
provided as is, if you find any errors please report them in the forums.
The latest version of this guide can always be found at http://www.windows-n...ws-server-2008/
In a production environment please consult Technet for best practise, see below links:
Prerequisites:
Configuration:
System Center Configuration Manager 2007
How to Configure Windows Server 2008 for Site Systems
Best Practices:
Configuring Configuration Manager Sites for Best Performance
Checklist for Security Best Practices
Best Practices for Central and Primary Site Hardware and Software Configuration
Best Practices for Operating System Deployment
This guide assumes that you have first setup Windows Server 2008 and configured it for Active Directory, with DHCP (you only need steps 1 and 2 this guide). If you
want to deploy operating systems within SCCM you will then also need the Windows Deployment Services installed, and that is covered in steps 3 and 4 of this
guide).
You must have installed and configured IIS (for SCCM) and installed SQL Server 2005 SP2 (or SQL Server 2008 with this hotfix) and WSUS (you can install WSUS
later if you want, it's only required for the SUP role).
Please note: WSUS SP2 is a role within Server 2008 R2 so if you are using Server 2008 R2 you can install WSUS Sp2 by adding the role.
If you are thinking about hosting SQL Server on another server than the SCCM server then please read this post.
enter your servername as below (leave OUT the instance name or you may get errors explained in the Final Note)
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.com Page 2 of 20
this gave me two prerequisites which needed looking at, the AD Schema extensions, Microsoft Remote Differential compression.
If you want to get more details of the problems identified, then check c:\ConfigMgrPrereq.log (and c:\ConfigMgrSetup.log) or double click each warning/error in
turn to get a short description (scrollable) of the problem.
Quote
<08-22-2008 10:33:16> WIN-2SDX7MZCDA7; Schema extensions; Warning; Configuration Manager Active Directory schema extensions are not required, for site
server installation, but are recommended to fully support the use of all Configuration Manager features.
My first problem was that I needed to extend the Active directory schema, to do so I followed this guide.
Once I had extended the active directory schema, I ran the prerequisite checker again,
Quote
The Microsoft Remote Differential Compression (RDC) library must be registered for Configuration Manager site server installation
Quote
Site servers and branch distribution points require Remote Differential Compression (RDC) to generate package signatures and perform signature comparison. RDC
is not installed by default on computers running Windows Server 2008 and is not installed automatically during Configuration Manager Setup. For information
about installing RDC on Windows Server 2008 computers, see How to Configure Windows Server 2008 for Site System Roles.
Site servers and branch distribution points require Remote Differential Compression (RDC) to generate package signatures and perform signature comparison. RDC
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.com Page 3 of 20
To add Remote Differential Compression to site servers and branch distribution points
In Server Manager, on the Features node, start the Add Features Wizard.
Resized to 94% (was 1024 x 740) - Click image to enlarge
On the Select Features page, select Remote Differential Compression, and then click Next.
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.com Page 4 of 20
Now run the prerequisite checker again and the RDC error should be gone
Final Note: if you entered the instance name at the start of this guide, you may get an error which states
Quote
Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server instance targeted for site
database installation or the SQL Server instance could not be contacted to verify permissions. Setup cannot continue.
Quote
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.com Page 5 of 20
A SQL Server best practice is to remove the Builtin\Administrators group from the sysadmin role on installed SQL Server instances. If the Builtin\Administrators
group has been removed from the sysadmin role, the user account running Configuration Manager Setup must be granted sysadmin role permissions for setup to
succeed.
Microsoft MVP 2010 - SCCM
My linkedin profile at > linkedin.com
Follow me on Twitter > ncbrady
Follow windowsnoob.com on Twitter > windowsnoob
My blog on myITforum
anyweb
Posted 25 August 2008 - 07:52 PM
Part 2. Install it !
Start the SCCM 2007 SP1 DVD and click on Configuration Manager 2007 SP1 under Install
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.com Page 6 of 20
Next we get to choose the type of installation, as we want to see all the options, choose Custom
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.com Page 7 of 20
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.com Page 8 of 20
where to install it
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.com Page 9 of 20
For the mode type, choose mixed mode (it is easier to setup and we can always migrate to Native mode in the future).
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.c... Page 10 of 20
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.c... Page 11 of 20
Note: The SMS Provider can be installed on the site database server computer, site server computer, or another server class computer (during setup at this point).
The SMS Provider is used by the Configuration Manager console, Resource Explorer, tools and custom scripts used by Configuration Manager Admins to access site
information stored in the site database.
specify the management point
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.c... Page 12 of 20
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.c... Page 13 of 20
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.c... Page 14 of 20
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.c... Page 15 of 20
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.c... Page 16 of 20
preddy
Posted 25 September 2009 - 06:00 AM
Hi,
I am new to this web site,
I am trying install SCCM 2007 on virtual machine, I run the prerequisite checker, i got one warning message of WSUS SDK, After that
when i am trying to install SCCM, i am unable to choose primary site( attached error message), please advise on this, i need to create an image urgently.
thanks.
Attached File(s)
sccm.doc (134.5K)
Number of downloads: 912
That is not an error it is just a warning that doesn't influence installing SCCM. Just click Ok and the installation will continue
My Blog: http://www.petervanderwoude.nl/
preddy
Posted 27 September 2009 - 08:47 AM
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.c... Page 17 of 20
That is not an error it is just a warning that doesn't influence installing SCCM. Just click Ok and the installation will continue
Hi, thanks for the reply,
I am unable to install SCCM, i think i need to choose primary site as described in the topic, pls advise.
anyweb
Posted 27 September 2009 - 08:59 AM
looks like you are using the upgrade media from your screenshot....
try using the correct media for installing sccm 2007 sp1
Microsoft MVP 2010 - SCCM
My linkedin profile at > linkedin.com
Follow me on Twitter > ncbrady
Follow windowsnoob.com on Twitter > windowsnoob
My blog on myITforum
preddy
Posted 28 September 2009 - 08:31 AM
looks like you are using the upgrade media from your screenshot....
try using the correct media for installing sccm 2007 sp1
Hi,
I am trying SCCM 2007 SP1, i un installed and reinstalled SQL 2008, but still same problem, i am unable to choose primary site, pla advise.
anyweb
Posted 28 September 2009 - 08:40 AM
what SCCM iso did you download from msdn/technet ? what is the filename ?
Microsoft MVP 2010 - SCCM
My linkedin profile at > linkedin.com
Follow me on Twitter > ncbrady
Follow windowsnoob.com on Twitter > windowsnoob
My blog on myITforum
preddy
Posted 28 September 2009 - 08:47 AM
what SCCM iso did you download from msdn/technet ? what is the filename ?
anyweb
Posted 28 September 2009 - 09:26 AM
ok
that is only for upgrading an existing SCCM 2007 installation
see > http://www.microsoft...&displaylang=en
assuming that you are trying to install SCCM 2007 sp1 for the first time., you need to download and install the following from technet/msdn
System Center Configuration Manager 2007 with Service Pack 1 (x86) - DVD (English)
en_system_center_configuration_manager_2007_with_service_pack_1_x86_dvd_x14-
66461.iso
do you see that file anywhere ??? the numbers after dvd_ may be different for you...
Microsoft MVP 2010 - SCCM
My linkedin profile at > linkedin.com
Follow me on Twitter > ncbrady
Follow windowsnoob.com on Twitter > windowsnoob
My blog on myITforum
preddy
Posted 29 September 2009 - 09:04 AM
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.c... Page 18 of 20
ok
that is only for upgrading an existing SCCM 2007 installation
assuming that you are trying to install SCCM 2007 sp1 for the first time., you need to download and install the following from technet/msdn
System Center Configuration Manager 2007 with Service Pack 1 (x86) - DVD (English)
en_system_center_configuration_manager_2007_with_service_pack_1_x86_dvd_x14-
66461.iso
do you see that file anywhere ??? the numbers after dvd_ may be different for you...
Hi,
Thank you so much, i am able to install SCCM.
preddy
Posted 06 October 2009 - 05:15 AM
Hi All,
when i am trying to create a capture media i am receiving error message "Certificates for the default management point are not available (internal error", i think i
need add boot media certificates, please advise me how to create certificate.
anyweb
Posted 06 October 2009 - 06:35 AM
please raise a new topic in the correct section, this topic is for how to install SCCM 2007 SP1 in Windows Server 2008..
Microsoft MVP 2010 - SCCM
My linkedin profile at > linkedin.com
Follow me on Twitter > ncbrady
Follow windowsnoob.com on Twitter > windowsnoob
My blog on myITforum
Wyatt Wong
Posted 15 July 2010 - 07:11 AM
Do I need to promote the Windows Server 2008 to an Active Directory instead of joining the Windows Server 2008 to an existing Active Directory forest ?
138car
Posted 01 October 2010 - 05:41 PM
I followed this guide for my lab build. I was getting pretty frustrated with failures. It turned out my initial extraction of "SCConfigMgr07_EVAL_EN.exe" was
corrupt. After I re extracted and ran the setup locally it worked fine.
Great guide.
Thank You!
My lab environment
2003 AD
DL 380 G3 4GB RAM /2003 Server running VMware Server
VM Running 2008 Server SP2, SQL 2008R2 & SCCM
Wyatt Wong
Posted Yesterday, 12:16 AM
I am using Windows Server 2008 R2 standard edition and when I run the SCCM 2007 Prerequisite checker, I got the following warning:
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.c... Page 19 of 20
and download the KB941078, however when I try to install it, I got the following error:
konetie
Posted Yesterday, 04:05 AM
I am using Windows Server 2008 R2 standard edition and when I run the SCCM 2007 Prerequisite checker, I got the following warning:
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010
how can I install SCCM 2007 sp1 in Windows Server 2008 - www.windows-noob.c... Page 20 of 20
Do you have .NET Framework 2.0 with SP levels installed on the compter ?
try uninstalling the .net framework and installing.
What does the eventvwr says ?
MCTS: SCCM, SCOM
My blog @ www.eskonr.wordpress.com
**** If you found this information useful, please repurate this post by clicking on the + Sign ****
Wyatt Wong
Posted Yesterday, 04:31 AM
Do you have .NET Framework 2.0 with SP levels installed on the compter ?
try uninstalling the .net framework and installing.
What does the eventvwr says ?
I checked that .NET Framework 2.0 is already installed with Windows Server 2008 R2, I have not applied any SP for the .NET Framework 2.0
Check Event Viewer and no abnormal message.
Are you experiencing that particular issue (about the software updates browse error dialog box) then? Because only then should this update be applied and otherwise
its just a waste of your time trying to install it...
My Blog: http://www.petervanderwoude.nl/
Page 1 of 1
Dell™ Personal Laptops Configure your Laptops In Simple and Easy Steps. Intel® Core™ i3 Dell.co.in/Home/Laptops
Dell Storage Solutions Get Storage Solutions at Dell's Official Business Site. Shop Today www.Dell.com/IN/Storage
Fenesta UPVC Window Door European Quality. Made for India. India's #1 Window & Door Company www.Fenesta.com
http://www.windows-noob.com/forums/index.php?/topic/487-how-can-i-install-sccm-2... 10/7/2010