Beruflich Dokumente
Kultur Dokumente
Description
The 55505 is a robust flange mounting hall effect sensor primarily for geartooth
speed sensing. Protected against severe and automotive environments. It is
capable of switching up to 27Vdc and 20mA and available as three-wire (voltage
output) version. It’s case design encorporates brass mounting bush. It is ideally
suited to wheel, transmission and camshaft speed sensing, geartooth sensor,
rotary encoders, industrial, commercial, and automotive applications.
Features
• Ferrous target speed sensing • Automotive grade circuit protection
• Internal circuit protection • High speed operation
• Protection against severe and • Short circuit and reverse voltage
automotive environments protection
Dimensions • Self adjusting magnetic range • On board 10-bit A/D convertor
Dimensions in mm (inch)
41.40 31.75
(1.630)
Benefits
(1.250)
• No chopper delay 5.00 • Rotational alignment to target
• Immune to target run(.197)
out not critical
22.00 300
(.866) (11.81)
6.35 NOM.
(.250)
Ø17.86
(.703)
0 Ø23.80
) (.937)
Block Diagram Application Example (Geartooth Sensor)
VDD
Pin 3
(Red)
R1
2mm
(.078) Max.
Rpu
Hall
Plate
Switch Comparator Output Typical Output
C1
Clock
C2
GND OUT
Pin 1 Pin 2
(Black) (White with
Black Stripe)
Electrical Ratings
Digital Switch
Hall Type
3-Wire (Voltage Output)
VDD -2
Output High Voltage Vdc - min.
(-2 sinking output with internal pull-up)
mA - min. 1
Current Consumption
mA - max. 10.5
Note:
1. As long as Tj (Junction Temperature) is not exceeded.
B Deutsch DTM04-3P
Series
Cable Length
02
Termination
A, B, or C
Packaging
Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width