Beruflich Dokumente
Kultur Dokumente
1995
Edition 3.0a
DATA SHEET
MB506
ULTRA HIGH FREQUENCY PRESCALER
ULTRA HIGH FREQUENCY PRESCALER
The Fujitsu MB506 is a high frequency, up to 2.4GHz, prescaler used with a
frequency synthesizer to form a Phase Locked Loop (PLL). It will divide the input
frequency by the modulus of 128 or 256 and the output level is 1.6V peak to peak
on ECL level.Operation in the 1.6GHz range meets the specification for
applications in Direct Broadcasting Satellite Systems (DBS), CATV systems, and
UHF Transceivers.
PLASTIC PACKAGE
DIP-08P-M01
FEATURES
IN 1 8 IN
ABSOLUTE MAXIMUM RATINGS (See Note) VCC 2 7 NC
TOP VIEW
Rating Symbol Value Unit SW 3 6 SW2
OUT 4 5 GND
Supply Voltage VCC –0.5 to +7.0 V
Output Current IO 10 mA
the operational sections of this data sheet. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
D Q D Q D Q
Input C Q C Q C Q
Buffer
IN
IN
SW SW
D Q D Q D Q D Q D Q Output
SW SW Buffer
C Q C Q C Q C Q C Q OUT
H H 1/64
L H 1/128
H L 1/128
L L 1/256
PIN DESCRIPTION
Pin Number Symbol Function
1 IN Input
3 SW1 Divide Ratio Control Input Selecting Divide Ratio (See Divide Ratio Table)
4 OUT Output
5 GND Ground
6 SW2 Divide Ratio Control Input Selecting Divide Ratio (See Divide Ratio Table)
7 NC No Connection
8 IN Complementary Input
2
MB506
Load Capacitance CL 12 pF
ELECTRICAL CHARACTERISTICS
(Recommended operating conditions unless otherwise noted.)
Value
Parameter Symbol Conditions Unit
Min. Typ. Max.
High Level Input Voltage for SW VIHS* VCC –0.1 VCC VCC +0.1 V
Low Level Input Voltage for SW VILS Open V
Note: *Design Guarantee
MINIMUM INPUT SIGNAL AMPLITUDE (MVp–p)
1000
VCC = 5.0V
TA = 25°C
800
600
400
200
0
100 200 500 1000 2000 5000
INPUT FREQUENCY (MHz)
3
MB506
PACKAGE DIMENSIONS
8-LEAD PLASTIC DUAL-IN-LINE PACKAGE 8-LEAD PLASTIC FLAT PACKAGE
(CASE No.: DIP-08P-M01) (CASE No.: FPT-08P-M01)
.010
15° MAX .250 – .008
INDEX .002(0.05)
0.25
6.35 – 0.20 MIN
.244+.010 (STAND OFF)
(6.20+0.25)
.300(7.62)TYP View “A”
.008(0.2)
.307+.016 .016
(7.8+0.4) .268 – .008
INDEX
.010+.02
.016 (0.25+0.5) 0.40
.370 – .012 .209+.012 6.80 – 0.20
.014
.035 – .012
0.40
9.40 – 0.30
(5.30+0.25) .020(0.5)
.007(0.18)
MAX
0.35
0.89 – 0.30 .020+.008
(0.5+0.2)
.027(0.68)
MAX
.100(2.54)TYP
.050(1.27) .018+.004
(0.45+0.10) .002
TYP .006 – .001
.172(4.36)MAX
0.05
0.15 – 0.2
.085(2.15)MAX
.012 .020*0.51) .118(3.0)MIN
.039 – 0 MIN
.0315+.008
0.3
0.99 – 0 .018+.003 (0.8+0.2)
(0.46+0.08) A
.012
.060 – 0
0.3
1.52 – 0
Dimensions in Dimensions in
inches (millimeters) inches (millimeters)
All Rights Reserved. Circuit diagrams utilizing Fujitsu products are The information contained in this document does not convey any license
included as a means of illustrating typical semiconductor applications. under the copyrights, patent rights or trademarks claimed and owned by
Complete information sufficient for construction purposes is not Fujitsu. Fujitsu reserves the right to change products or specifications
necessarily given. The information contained in this document has been without notice. No part of this publication may be copied or reproduced in
carefully checked and is believed to be reliable. However, Fujitsu any form or by any means, or transferred to any third party without prior
assumes no responsibility for inaccuracies. written consent of Fujitsu.
FUJITSU LIMITED
For further information please contact: Europe
Japan FUJITSU MIKROELEKTRONIK GmbH
Am Siebenstein 6-10,
FUJITSU LIMITED 6072 Dreieich-Buchschlag,
International Marketing Div. Germany
Furukawa Sogo Bldg., 6-1, Marunouchi 2-chome Tel: (06103) 690-0
Chiyoda-ku, Tokyo 100, Japan Telex: 411963
Tel: (03) 3216-3211 FAX: (06103) 690-122
Telex: 781-2224361
FAX: (03) 3215-0662
Asia
North and South America FUJITSU MICROELECTRONICS ASIA PTE LIMITED
51 Bras Basah Road,
FUJITSU MICROELECTRONICS, INC. Plaza By The Park,
Integrated Circuits Division #06-04 to #06-07
3545 North First Street Singapore 0719
San Jose, CA 95134-1804, USA Tel: 336-1600
Tel: 408-922-9000 Telex: 55573
FAX: 408-432-9044 FAX: 336-1609