Beruflich Dokumente
Kultur Dokumente
Presented by:
Andrés Gómez
Group:
Tutor:
WILMER HERNAN GUTIERREZ
2𝑚𝐻
2. A transmission line has the following parameters:𝐿 = ,
𝑘𝑚
𝐶 = 45 𝑛𝐹/𝑘𝑚, 𝐺 = 1.2𝜇𝑆/𝑘𝑚 and𝑅 = 4Ω/𝑘𝑚. It has a generator
supplying 200𝑉 𝑟𝑚𝑠 at 𝜔 = 5 𝑥 103 𝑟𝑎𝑑/𝑠 and in series with a
resistance of200Ω. The load has an impedance of 300Ω. Find the
input voltage and current.
𝑅 + 𝑗𝑤𝐿
𝑍0 = √
𝐺 + 𝑗𝑤𝐶
Where:
𝑍0 = 0.2108
Now we calculate the input impedance, for this we assume that there is a short circuit in
Z_L and therefore there will be no impedance, as we do not have the value of the electrical
length then
𝑍𝐿 = 𝑍0
From there we developed the voltage divider:
𝑍0
𝑉𝑖𝑛 = 𝑉𝑔
𝑍𝑔 + 𝑍0
Replacing we have:
0.2108
𝑉𝑖𝑛 = (200𝑉 𝑟𝑚𝑠) = 0.1404
300 + 0.2108
With this we calculate the current that circulates through the line by the law of ohm:
𝑉𝑖𝑛 0.1404
𝐼= = = 0.6661
𝑍0 0.2108