Beruflich Dokumente
Kultur Dokumente
N/m2
B. Lumens D. watt/m2
A. Kilogram C. Lux 12. What is the unit of potential
B. Pound D. Candlepower difference?
C. Gram 7. What is the unit of relative intensity?
D. Newton A. Watt
2. What is defined as the distance the light A. Pa B. Coulomb
travels in a vacuum in 1/299,792,458 B. N-m C. Volt
second? C. C.N-m/s D. Weber
D. Unitless 13. Which of the following is equivalent to
A. Yard 8. What is the SI unit of pressure? a volt?
B. Feet
C. Meter A. Pa A. watt/coulomb
D. Inch B. N-m B. joule/coulomb
3. What is the SI unit of work? C. N/m C. joule/watt
D. N-m/s D. watt/joule
A. Newton 9. Which one is equivalent of the unit 14. One election volt is equivalent to
B. Watt “Pascal‟? _______ joules.
C. Newton-Second
D. Joule A. N/nm2 A. 1.6 x 10^-17
4. What is the SI unit of power? B. N/m2 B. 1.6 x 10^-18
C. N/m C. 1.6 x 10 ^-19
A. Newton D. D.N/nm D. 1.6 x 10^-20
B. Watt 10. The pressure of 1 bar is equivalent to 15. What is the unit of capacitance?
C. Newton-Second how many pascals?
D. Joule A. Farad
5. What is the SI unit of temperature? A. 1,000,000 B. Weber
B. 100,000 C. Coulomb
A. Fahrenheit C. 10,000 D. Gauss
B. Kelvin D. D.1000 16. Which of the following is equivalent to
C. Celsius 11. What is the SI unit of intensity? the unit “farad”?
D. Rankine
6. What is the SI unit of luminous A. Joule/m2 A. coulomb/volt
intensity? B. kg/m2 B. joule/volt
C. joule/coulomb 22. What is the unit of luminous flux? 27. Footcandle is equivalent to which
D. coulomb/joule combination of units?
17. What is the unit of electric current? A. Candela
B. Lumen A. lumen/cm2
A. Volt C. Lux B. lumen/ft2
B. Watt D. Footcandle C. lumen/m2
C. Ampere 23. Which of the following is equivalent to D. lumen/in2
D. Coulomb the unit “candela”? 28. How many dynes are there in one
18. Which of the following is equivalent to newton?
the unit “ampere”? A. lumen/m2
B. footcandle/steradian A. 10,000
A. joule/second C. lux/steradian B. 100,000
B. volt/second D. lumen/steradian C. 1,000,000
C. coulomb/second 24. What is the unit of luminous D. D.1000
D. watt/second efficiency? 29. What is an elemental unit of energy?
19. What is the unit of resistance?
A. lumen/watt A. Quartz
A. Ohm B. lumen/volt B. Quark
B. Watt C. lumen/ampere C. Photon
C. Volt D. lumen/coulomb D. Quantum
D. Ampere 25. What is the unit of illumination? 30. What refers to the mass which is
20. Ohm is equivalent to which of the accelerated at the rate of one foot per
following? A. Lux second when acted on by a force of one
B. Lumen pound?
A. coulomb/ampere C. Candela
B. watt/ampere D. Lumen/watt A. Slug
C. volt/ampere 26. Lux is equivalent to which combination B. Erg
D. joule/ampere of units? C. Dyne
21. What is the unit of luminous intensity? D. BTU
A. lumen/cm2 31. The size of some bacteria and living
A. Footcandle B. lumen/ft2 cells is in the order of _______.
B. Lumen C. lumen/m2
C. Candela D. lumen/in2 A. centimetre
D. Lux B. millimetre
C. nanometer B. 746 A. 1 volt
D. micrometer C. 33,000 B. 0.1 volts
32. The size of the largest atom is in the D. 250 C. 10 volts
order of ________. 37. The “kilowatt-hour” is a unit of D. 0.01 volts
_______. 42. What is a vector with a magnitude of
A. centimeter one and with no unit?
B. millimeter A. work
C. nanometer B. energy A. Single vector
D. micrometer C. power B. Unit vector
33. The mass of a grain of salt is in the D. work or energy C. Dot vector
order of _______. 38. The “kilowatt-hour” is a unit of D. Scalar vector
_______. 43. What is the purpose of a unit vector?
A. milligram
B. gram A. work A. To describe the direction in space
C. microgram B. energy B. To indicate a magnitude without
D. nanogram C. power reference to direction
34. Which one is equivalent to the unit D. work or energy C. To serve as comparison with other
„joule‟? 39. The English unit “slug” is a unit of vectors
_______. D. To set a standard among vectors
A. Newton-second 44. What is another term for a scalar
B. Newton-meter A. mass product of two vectors?
C. Newton-meter per second B. weight
D. Newton-meter per second squared C. force A. Cross product
35. Which one is equivalent to the unit D. energy B. Vector product
“watt”? 40. How is sound intensity measured? C. Dot product
D. Plus product
A. Newton-second A. In beats 45. What is another term for vector
B. Newton-meter B. In decibels product of two vectors?
C. Newton-meter per second C. In phons
D. Newton-meter per second squared D. In sones A. Cross product
36. One horsepower is equivalent to how 41. An electron volt is the energy required B. Vector product
many watts? by an electron that has been accelerated C. Dot product
by a potential difference of how many D. Plus product
A. 550 volts?
46. The scalar product of two B. Vector quantities 55. The _______ of a moving object is the
perpendicular vectors is always _______. C. Dot product distance it covers in a time interval divided
D. Vector quantities by the time interval.
A. equal to 1 51. Which is NOT a vector quantity?
B. greater than 1 A. acceleration
C. less than 1 A. Displacement B. instantaneous speed
D. equal to 0 B. Velocity C. average speed
47. The vector product of two parallel or C. Acceleration D. instantaneous velocity
antiparallel vectors is always ______. D. Time 56. The rate at which velocity changes
52. Which is NOT a fundamental physical with time is known as ________.
A. equal 1 quantity of mechanics?
B. greater than 1 A. acceleration
C. less than 1 A. Length B. instantaneous speed
D. equal to 0 B. Mass C. average speed
48. The vector product of any vector with C. Volume D. instantaneous velocity
itself is ______. D. Time 57. “The work done by the net force on a
53. What is an arrowed line whose length particle equals the change in the particle‟s
A. equal to 1 is proportional to the magnitude of some kinetic energy.” This statement is known
B. greater than 1 vector quantity and whose direction is that as _________.
C. less than 1 of the quantity?
D. equal to 0 A. Law of conservation of energy
49. What refers to physical quantities that A. Vector diagram B. Work-energy theorem
are completely specified by just a number B. Vector C. Law of conservation of work
and a unit or physical quantities that have C. Component D. Total work theorem
magnitudes only? D. Resultant 58. The ________ of a particle is equal to
54. What is scaled drawing of the various the total work that particle can do in the
A. Scalar quantities forces, velocities or other vector quantities process of being brought to rest.
B. Vector product involved in the motion of a body?
C. Dot product A. kinetic energy
D. Vector quantities A. Vector diagram B. potential energy
50. What refers to physical quantities that B. Vector C. total energy
have a magnitude and a direction? C. Component D. mechanical energy
D. Resultant 59. Work is defined as the product of:
A. Scalar quantities
A. Force and displacement 64. “If no net force acts on it, an object at B. Mass
B. Force and time rest will remain at rest and an object in C. Weight
C. Displacement and time motion will remain in motion at constant D. All of the above
D. Power and time velocity”. This statement is the _______. 68. How many kilograms are there in 1
60. What is defined as the time rate at slug?
which work is done? A. first law of motion
B. second law of motion A. 11.9
A. impulse C. third law of motion B. 12.5
B. Momentum D. d‟Alembert‟s principle C. 13.2
C. Power 65. “The net force acting on an object D. D.14.6
D. Energy equals the product of the mass and the 69. What refers to an actual force that
61. What is defined as any influence that acceleration of the object. The direction of arises to oppose relative motion between
can change the velocity of an object? the force is the same as that of the contracting surfaces?
acceleration”. This statement is the
A. Impulse _______. A. Action force
B. Force B. Reaction force
C. Energy A. first law of motion C. Friction
D. Work B. second law of motion D. Drag
62. What is a measure of the inertia of an C. third law of motion 70. What refers to the force between two
object? D. d‟ Alembert‟s principle stationary surfaces in contact that
66. “When an object exerts a force on prevents motion between them?
A. Density another object, the second object exerts
B. Weight on the first a force of the same magnitude A. kinetic friction
C. Mass but in the opposite direction”. This B. sliding friction
D. Force statement is the _____. C. starting friction
63. What is the property of matter which is D. static friction
the reluctance to change its state of rest A. first law of motion 71. What is the maximum value of the
or of uniform motion? B. second law of motion static friction?
C. third law of motion
A. Impulse D. d‟Alembert‟s principle A. Starting friction
B. Momentum 67. What refers to the force with which the B. Sliding friction
C. Inertia earth attracts an object? C. Kinetic friction
D. Equilibrium D. Dynamic friction
A. Gravitational pull
72. What is TRUE between kinetic friction 75. Efficiency of a machine is the ratio of: C. changes abruptly
and static friction? D. remains constant
A. power output to power input 80. What is conserved in an elastic
A. Kinetic friction is always to static B. power input to power output collision?
friction C. total work done to total energy
B. Kinetic friction is always less than D. total energy to total power A. Kinetic energy
static friction 76. What is the energy something B. Potential energy
C. Kinetic friction is always greater possesses by virtue of its motion? C. Rest energy
than static friction D. Mechanical energy
D. Kinetic friction is equal to or greater A. Kinetic energy 81. In elastic collision, kinetic energy is
than static friction B. Potential energy conserved. This statement is:
73. What is another term for kinetic C. Rest energy
friction? D. Mechanical energy A. true
77. What is the energy something B. false
A. Dynamic friction possesses by virtue of its mass? C. is either true or false, depending
B. Starting friction upon the colliding bodies
C. Sliding friction A. Kinetic energy D. is either true or false, depending on
D. All of the above B. Potential energy the impact of two colliding bodies
74. For the same materials in contact, C. Rest energy 82. When can we say that a collision is a
what is TRUE between coefficient of static D. Mechanical energy completely inelastic collision?
friction and coefficient of kinetic friction? 78. What is the energy something
possesses by virtue of its position? A. When the kinetic energy lost is
A. Coefficient of static friction is minimum.
always less than the coefficient of A. Kinetic energy B. When the kinetic energy is
kinetic friction B. Potential energy conserved.
B. Coefficient of static friction is C. Rest energy C. When the two colliding objects stick
always equal to the coefficient of D. Mechanical energy together after impact.
kinetic friction 79. When the vector sum of the external D. When the two colliding objects will
C. Coefficient of static friction is forces acting on the system of particles separate after impact.
always greater than the coefficient of equals zero, the total linear momentum of 83. What will happen to the kinetic energy
kinetic friction. the system __________. if it is a completely inelastic collision?
D. Coefficient of static friction may be
greater than or less than the A. becomes zero A. It is conserved.
coefficient of kinetic friction. B. maximizes B. It is lost to maximum value.
C. It is gained from the loss of equals zero, the total linear momentum of C. Reverse-effective force
potential energy. the system remaining constant.” This D. Gravitational force
D. It is lost to minimum value. statement is known as: 93. The centripetal force is:
84. Coefficient of restitution is the ratio of:
A. Law of universal gravitation A. directed away from the center of
A. relative speed after collision to B. Law of conservation of impulse the curvature of the path
relative speed before collision C. Law of conservation of momentum B. directed toward the center of
B. relative speed before collision to D. Law of conservation of energy curvature of the path
relative speed after collision 89. What refers to the product of the force C. tangent to the curvature of the path
C. relative speed to absolute speed and the time during which a force acts? D. either directed away or toward the
D. absolute speed to relative speed center of curvature of the path
85. What is the coefficient of restitution for A. Impulse 94. What refers to the time needed by an
a perfectly elastic collision? B. Momentum object in uniform circular motion to
C. Power complete an orbit?
A. 0 D. Energy
B. 1 90. Momentum is the product of: A. path time
C. Less than 1 B. orbit time
D. Greater than 1 A. mass and time C. revolution
86. What is the coefficient of restitution for B. velocity and mass D. period
a perfectly inelastic collision? C. force and time 95. The centripetal acceleration of a
D. force and mass particle in uniform motion is _______ to
A. 0 91. The coefficient of restitution always the radius of its path.
B. 1 applies _________.
C. Less than 1 A. directly proportional
D. Greater than 1 A. to only one of the colliding objects B. inversely proportional
87. The coefficient of restitution always B. to neither of the colliding C. equal
applies _______. C. jointly to the colliding objects D. not related in any way
D. to the bigger colliding object 96. Gravitation occurs between all objects
A. to only one of the colliding objects 92. What refers to the force perpendicular in the universe by virtue of their
B. to neither of the colliding objects to the velocity of an object moving along a ________.
C. jointly to the colliding objects curve path?
D. to the bigger colliding object A. mass
88. “When the vector sum of the external A. Centrifugal force B. density
forces acting on a system of particles B. Centripetal force C. weight
D. volume D. Rest energy A. moment of mass
97. “Every object in the universe attracts B. moment of area
every other object with a force directly C. moment of inertia
proportional to the product of their masses 101. Angular momentum is the product of D. torque
and inversely proportional to the square of ________. 105. The _______ of a force about a
the distance separating them”. This particular axis is the product of the
statement is known as: A. moment of inertia and linear speed magnitude of the force and the
B. moment of area and angular speed perpendicular distance from the line of
A. Law of conservation of energy C. moment of inertia and angular action of the force to the axis.
B. Law of universal gravitation speed
C. Law of conservation of momentum D. moment of area and angular speed A. inertia
D. Law of conservation of impulse 102. “When the sum of the external B. mass moment
98. The gravitational force of the earth on torques acting on a system of particles is C. torque
an object varies of the ______ the zero, the total angular momentum of the D. moment
distance of the object from the center of system remains constant “. This statement 106. When the forces that act on an object
the earth. is known as: have a vector sum of zero, the object is
said to be in _______.
A. inversely as A. Conservation of energy
B. inversely as the square of B. Conservation of impulse A. unstable equilibrium
C. directly as C. Conservation of linear momentum B. stable equilibrium
D. directly as the square of D. Conservation of angular momentum C. rotational equilibrium
99. A rotating body has kinetic energy. 103. What particles will experience D. translational equilibrium
This statement is ________. tangential acceleration? 107. Which of the following is an example
of a neutral equilibrium?
A. sometimes true A. Those particles whose angular
B. sometimes false speed changes A. A cone balanced on its apex.
C. always true B. Those particles whose angular B. A cone balanced on its base.
D. always false speed remains constant C. A cone on its side.
100. What type of energy is usually C. All particles D. A cone balanced on the
transmitted by rotary motion? D. Those particles whose angular circumference of its base.
speed is zero. 108. Which of the following is an example
A. Kinetic energy 104. The _________ of a body about a of a stable equilibrium?
B. Potential energy given axis is the rotational analog of mass
C. Mechanical energy of the body is distributed about the axis. A. A cone balanced on its apex.
B. A cone balanced on its base. A. It is always inside the object. 118. What is another term for specific
C. A cone on its side. B. It is always outside the object. gravity?
D. A cone balanced on the C. It is always at its geometric center.
circumference of its base. D. It may sometimes be inside the A. Density
109. A device that transmits force or object and sometimes outside the B. Weight density
torque is called _______. object. C. Relative density
114. What is defined as the mass per unit D. Viscosity
A. mechanical tool volume? 119. What is the average pressure of the
B. machine earth‟s atmosphere at sea level?
C. axle A. Density
D. wedge B. Weight density A. 1.042 bar
110. If a cone is balanced on its apex, it C. Relative density B. 1.021 bar
illustrates what type of equilibrium? D. Specific density C. 1.013 bar
115. What is defined as the weight per D. 1.037 bar
A. stable equilibrium unit volume? 120. “An external pressure exerted on a
B. neutral equilibrium fluid is transmitted uniformly throughout
C. unstable equilibrium A. Density the volume of the fluid”. This statement is
D. translational equilibrium B. Weight density known as ________.
111. When the net torque acting on an C. Relative density
object is zero, the object is in _______. D. Specific density A. Bernoulli‟s energy theorem
116. All are values of the density of water B. Pascal‟s principle
A. unstable equilibrium except one. Which one? C. Archimedes principle
B. stable equilibrium D. Torricelli‟s theorem
C. rotational equilibrium A. 1000 kg/m3 121. The hydraulic press is an instrument
D. translational equilibrium B. 62.4 lb/ft3 which uses one of the following theorems.
112. Which of the following is NOT a basic C. 10 g/cm3 Which one?
machine? D. 9.81 kN/m3
117. The __________ of a substance is its A. Bernoulli‟s energy theorem
A. lever density relative to that of water? B. Pascal‟s principle
B. incline plane C. Archimedes principle
C. hydraulic press A. density D. Reynold‟s principle
D. wedge B. weight density 122. The hydrometer is an instrument
113. Where is the center of gravity of an C. viscosity which uses one of the following theorems.
object located? D. specific gravity Which one?
A. Bernoulli‟s energy theorem 127. What refers to an oscillatory motion C. Wave
B. Pascal‟s principle that occurs whenever a restoring force D. Beat
C. Archimedes principle acts on a body in the opposite direction to 131. What occurs when periodic impulses
D. Reynold‟s principle its displacement from its equilibrium are applied to a system and frequency
123. The hydrometer is an instrument position, with the magnitude of the equal to one of its natural frequencies of
used to measure __________. restoring force proportional to the oscillation?
magnitude of the displacement?
A. pressure of a liquid A. Beat
B. density of a liquid A. Damped harmonic motion B. Resonance
C. Reynold‟s number B. Pendulum C. Doppler effect
D. viscosity of liquid C. Simple harmonic motion D. Shock wave
124. The maximum displacement of an D. Damped harmonic oscillation 132. What refers to a shell of high
object undergoing harmonic motion on 128. In a damped harmonic oscillator, pressure produced by the motion of an
either side of its equilibrium position is what reduces the amplitude of the object whose speed exceeds that of
called the _________ of the motion. vibrations? sound?
a. distance
b. rigid
c. free body
d. length
498. Is the effort to understand, or to
understand better, how nature works, with
observable physical evidence as the basis
of that understanding.
a. physics
b. science
c. physical evidence
d. load
499. A force that causes parts of a
material to slide past one another in
opposite directions.
a. force
b. stress
c. shear
d. momentum
500. Is a stress state where the stress is
parallel or tangential to a face of the
material, as opposed to normal stress
when the stress is perpendicular to the
face.
a. shear stress