Beruflich Dokumente
Kultur Dokumente
ANT Port for the GPS antenna. This port on the SMA male
GCGa/GCGb board is used to receive the timing
signals and positioning information from the GPS
satellite. This port is not used on the GCUa/GCUb
board.
TESTOUT Port for clock signal outputs. The clock signals are SMB male
used for testing.
TESTIN Port for clock signal inputs. The clock signals are SMB male
used for testing.
CLKIN0 and Port for BITS clock signal and line clock signal SMB male
CLKIN1 inputs
Indicators on Board
Table 2 describes the indicators on the GCUa/GCGa board.
http://localhost:7890/pages/GEG0103R/05/GEG0103R/05/resources/mbsc/m-bsc-hardware-description/mbsc-3-101.html 2/3
10.12.2018 Panel of a GCUa/GCGa Board
http://localhost:7890/pages/GEG0103R/05/GEG0103R/05/resources/mbsc/m-bsc-hardware-description/mbsc-3-101.html 3/3