Beruflich Dokumente
Kultur Dokumente
Manual
Safety Precautions
Thank you for purchasing this product. Please don't change the fuse on
Please read through these operating the power cord without professional
instructions so you will know how to guidance, using improper fuse may
operate your model properly. After you cause damage to this unit or even cause
have finished reading the instructions, fire.
keep this manual in a safe place for
future reference.
MUTE
OK
MUTE
MUTE
MUTE
OK
OK
1
Precautions
1. Never disassemble or adjust the unit without any professional guide.
For details, please consult any professional car shop / dealer for inquiry.
2. If the front panel or TFT monitor is squalid, please use a clean silicone cloth and neutral
detergent to wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol
for cleaning may result in scratching or decoloration to the applicant.
3. If any abnormal behavior of the unit is found, please refer to trouble shooting guide of this
manual. If no relevant information is found,please press the [RESET] key on the front panel to
resume factory default.
4. I f you have parked the car in hot or cold weather for a long time, please wait until the
temperature in the car becomes normal before operating the unit.
5. Using in-car heater in low temperature environment may result in beads coagulate inside the
unit, DO NOT use the unit in this situation, eject the disc and wipe off the bead on the disc. If
the unit still doesn't work after a few hours, please contact with after-sales service center.
6. No fierce impact to the LCD monitor when it is in open position for preventing the damage to
any mechanisms inside.
7. To prevent the damage to the screen, avoid touching it with sharp objects.
8. To provide a clear demonstration and an alternative for easy understanding to the operation of
this unit, graphic illustrations areused.
However, these illustrations are some different from the actual images displayed on the screen.
9. Operate the unit correctly according to this manual to prevent unnecessary problem. The
guarantee won't be valid if the problem is caused by inappropriate operation.
2
Contents
Safety Precautions....................................1 Adjust Bluetooth Settings......................15
Play Music.............................................15
Precautions................................................2
Adjust sound ..........................................16
Contents.....................................................3
Adjust Volume.......................................16
Before using...............................................4 Mute.......................................................16
Front Panel..............................................4 Select Preset Equalizer.........................16
Remote Control.......................................5 Adjust Fader/Balance............................16
Notes of Remote Control Using...............6
SETUP......................................................17
Uninstall Battery......................................6
Display System......................................17
Install Battery...........................................6
General Settings....................................17
Basic operations.......................................7 • Key color.............................................17
Power On/Off ..........................................7 • Rating.................................................17
Open SOURCE MENU............................7 • DVD password....................................17
Playing Source Selection.........................7
SETUP......................................................18
Set Date /Time.........................................7
• Calibration..........................................18
Set Date...................................................7
• Reset factory......................................18
Set Time..................................................7
• Beep ............................................... 18
Set Clock Mode.......................................7
Radio Settings.......................................18
Radio mode................................................8 • Radio area . .................................... 18
Select Radio as Playing Source..............8 Video Settings.......................................18
Select One Radio Band...........................8 • Rear camera .................................. 18
Tune........................................................8 • Parking .............................................. 18
Preset Station..........................................8 • Dimmer mode . .................................. 18
Local Seeking..........................................9 OSD Settings.........................................18
EQ Selection............................................9 • OSD....................................................18
RDS Basics ............................................9 Volume Settings....................................19
3
Before using
Front Panel
Note:
The graphic in this manual is for reference
only, and may be different from that in real
unit. Reference to real unit is suggested.
4
Before using
Remote Control
Eject disc
EJECT
ZOOM
5
Before using
Notes of Remote Control Using
1) Aim the remote control at the remote sensor on the unit.
2) Remove the battery from the remote control or insert a battery insulator if the battery has not
been used for a month or longer.
3) DO NOT store the remote control under direct sunlight or in high temperature environment, or it
may not function properly.
4) The battery can work for 6 months under normal condition. If the remote control can't work,
please change the battery.
5) Use “button shaped” lithium battery “CR2025” (3V) only.
6) DO NOT recharge, disassemble, heat or expose the battery in fire.
7) Insert the battery in proper direction according to the ( + ) and ( - ) poles.
8) Store the battery in a place where children cannot reach to avoid the risk of accident.
6
Basic operations
Power On/Off
Turn on: Short-press [ VOLUME / / ] knob on the front panel or [POWER] key on the remote
control.
Turn off: When on, long press [ VOLUME / / ] on the panel or press [POWER] key on the
remote control.
Note:
Playing source selection means selecting work mode, such as DVD mode, Radio mode, Camera
mode, etc.
Set Date
1. Touch [DATE].
2. Touch the date informationon on the screen.
A submenu is displayed.
3. Touch [ ] / [ ] to set year, month and day.
Set Time
1. Touch [TIME].
2. Touch the time on the screen, a submenu is displayed.
3. Touch [ ] / [ ] to set hour and minute.
Tip:
When date/time is set, touch the upper left corner of screen to exit.
7
Radio mode
Select Radio as Playing Source
Open the SOURCE MENU and then touch [Radio].
Tune
Auto tuning
Press and hold the [ ]/[ ] key on the remote control or touch
and hold [ ] / [ ] icon on the user interface more than 1 second to
seek a higher / lower station.
To stop searching, repeat the operation above or press other keys
having radio functions.
Note:
When a station is received, searching stops and the station is played.
Manual tuning
During manual tuning, the frequency will be changed in steps.
Press the [ ]/[ ] key on the remote control briefly or touch [ ]/[ ] icon on the user
interface to tune in a higher / lower station.
Preset Station
The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and each band can store 6 stations;
hence the unit can store 30 stations in total.
Preview scan
Touch [ ] to scan and play all strong stations for 5 seconds each. Press again to stop scanning
and play the current station.
Manual store
1. Tune to a station.
2. Touch [ ].
3. Touch one of the channels P1 to P6 to save the selected band.
8
Radio mode
Local Seeking
Touch the [LOC] icon and choose the Radio Local or Distance.
When the [LOC] icon turns red, only stations with sufficient signal strength will be detected.
EQ Selection
Press the [ ] icon and enter the EQ setup.
RDS Basics
RDS service availability varies with areas. Please understand if RDS service is not available in
your area, the following service is not available.
AF function
AF (Alternative Frequency): When the radio signal strength is poor, enabling the AF function will
allow the unit to automatically search another station with the same PI (program identification) as
the current station but with stronger signal strength.
TA function
The TA (Traffic Announcement flag) function lets the unit receive traffic announcements
automatically no matter what media source is playing back. The TA function can be activated by a
TP (Traffic Program) station broadcasting traffic information.
When TA is activated and a traffic announcement is received, the current playing source will be
overridden by the traffic announcement if the current radio band is FM indicating that the unit is
waiting for traffic announcements.
The unit returns to the original source after the traffic announcement has been received.
To activate TA function, touch the [TA] button on the user interface.
To cancel this function, do the operation above again.
PTY function
PTY is the abbreviation for Program Type which is a code defining
the type of program being broadcast (e.g. News or Rock).
Touch [ ] on the screen, the PTY options will display on the
screen. To view more PTY options, touch [ ] or [ ] on the
screen.
When one PTY option is touched (e.g. News), auto search for next
available PTY by increasing tuning frequency until the PTY of the
next station matches the current. If no matched PTY has been
found, the unit will return to the original radio frequency.
9
Playback
Load Disc
You can play video, audio or images stored on the following discs:
• DVD Video, DVD-R, DVD-RW
• VCD
• Audio CD, CD-R, CD-RW
Note:
Ensure that the disc contains playable content.
A B
10
Playback
Play/Pause
1. O nce a disc,USB or SD/MMC card is inserted, play starts
automatically.
For DVD movie, if a menu appears, press [ ] to start play.
2. To pause, touch [ ].
To resume play, touch [ ].
3. Skip to previous/next track/chapter, press [ ]/[ ] key.
Previous/Next
Touch [ ]/[ ] key on the screen to skip to previous/next track/chapter.
Fast Forward/Backward
Touch [ ]/[ ] key on the screen repeatedly to playback fast forward/backward.
Repeat
For DVD/VCD movie disc:
1. Touch bottom half of the screen to display menu on the screen, if necessary.
2. Touch [ 1/2 ] to display the 2nd menu.
3. Touch [ ] to select:
Repeat chapter: play the current chapter repeatedly.
Repeat title: play all chapters in the title repeatedly.
Repeat all: Play all the tracks in the folder repeatedly.
Repeat off: cancel repeat play.
11
Playback
For MP3/WMA files:
1. Touch anywhere except the upper left corner to display menu on the screen, if necessary.
2. [ ]: Play the current chapter repeatedly.
[ A ]: Play all chapters repeatedly.
[ ]: Cancel repeat play.
Tip:
You can also press REPEAT on the remote control to select repeated play mode.
Repeat A-B
You can repeat a specific of video file (repeat A-B).
1. Touch bottom half of the screen to display control menu, if necessary.
2. Touch [ 1/2 ] to display the 2nd menu, if necessary.
3. Touch [ A-B ] repeatedly to mark:
Repeat A-: the start of the section to repeat.
Repeat A-B: the end of the section to repeat.
The selected section plays repeatedly.
4. To exit A-B repeat mode, touch A-B repeatedly, [Repeat A-B off] is displayed.
Random Play
You can play audio tracks/files in random order.
During play, touch [ RDM ] on the remote control repeatedly to turn random play on or off.
Tip:
You may also press SUBTITLE on the remote control repeatedly to select subtitle language.
12
Playback
Picture Files Playback
hen you view pictures,touch bottom half of the screen to display
W
menu on the screen, if necessary.
Zooming
You can zoom in pictures for a close view.
1. Touch [ ] repeatedly to zoom in the picture.
2. Use [ ], [ ], [ ], [ ] keys to pan through the enlarged picture.
Rotate File
Touch [ ] repeatedly to rotate the picture.
Playback Speed
1. When you view pictures,touch bottom half of the screen to display menu on the screen, if
necessary.
2. Touch [ ] repeatedly to select your desired playback speed: Normal/Fast/Slow.
13
Bluetooth mode
Bluetooth is a wireless transmission way for short distance. The built-in bluetooth can connect with
the mobile phones having bluetooth function.
After connecting, you can control your mobile phone through the unit.
You can make or receive phone calls with Bluetooth-enabled phones through the unit. You can
also listen to music from a Bluetooth-enabled device.
Tip:
• The operational range between this unit and a Bluetooth device is approximately 10 meters (30
feet).
• Before you connect a Bluetooth device to this unit,familiarize yourself with the Bluetooth
capabilities of the device.
• Compatibility with all Bluetooth device is not guaranteed.
• Any obstacle between this unit and a Bluetooth device can reduce the operational range.
• Keep this unit away from any other electronic device that may cause interference.
Tip:
• The device will also be disconnected when the device is moved beyond the operational range.
• If you want to reconnect the device to the unit, place it within the operational range.
• If you do not want to reconnect the device to the unit automatically, touch [ ], then touch
[ Auto connect ] until [ Off ] appears after [ Auto connect ]. For details, see the “Adjust Bluetooth
settings” section.
Make a Call
1. Select [Bluetooth] in the home menu.
2. Pair the phone with the unit.
3. Touch [ ], [ ] to select the paired phone, touch it to select.
4. Touch [ ], [ ] to search for phone number from the following
list:
∙ [Missed calls]
∙ [Received calls]
∙ [Dialed calls]
∙ [Phone book]
Or touch [ ] to dial number directly,then touch [ ] to dial.
14
Bluetooth mode
Receive a Call
By default,all incoming calls are received automaticaly.
1. If there is incoming call, the ncoming call and “Ringing” appear on
the screen. Speak into the Bluetooth microphone.
2. When conversation ends, touch [ ](red) to terminate the call.
Tip:
∙ You can select to receive calls manually by set [Auto answer] to [Off] status.
Tip:
∙ You can also adjust Bluetooth settings in the “Settings”menu.
Play Music
If the connected Bluetooth device supports Advanced Audio
Distribution Profile(A2DP), you can listen to the music stored on
the device through the unit. If the device also supports Audio Video
Remote Control Profile(AVRCP), you can use the control on the unit
or its remote control to play music stored on the device.
1.Pair the phone with the unit.
2.Touch the upper left corner to return to home menu.
3.Touch [Bluetooch],the Bluetooth menu is displayed.
4.Start play music via device.
15
Adjust sound
Adjust Volume
To adjust volume, rotate the volume knob on the host car audio.
Mute
When playback, press the VOLUME knob on the panel or [ ] on the screen (if available),
the sound is cut off.
To resume sound, press the button again.
Adjust Fader/Balance
You can also adjust the front and rear speaker balance, the left and right speaker balance,and
subwoofer settings.
1. Touch [ ] on the screen.
2. Touch [ ].
Below options are displayed:
3. Touch [ + ] or [ - ] to select subwoofer volume.
∙ [Sub] subwoofer volume: 0 to 24.
4. Touch [ ], [ ] or [ ], [ ] to adjust fader/balance value.
∙ [Fade] fader range: -7 to +7 (F=front range, R=rear range)
∙ [Balance] balance range: -7 to +7 (L=left range, R=rear range)
5. Touch the upper left corner of the screen to exit.
16
Setup
Display System
1. Touch the upper left corner to display main menu.
2. Touch [ ] in the nether right corner of the screen.
The second main menu is displayed.
3. Touch [Settings].
The settings menu is displayed.
General Settings
1. Touch [General], if necessary.
2. Touch [ ] or [ ] to highlight a setting.
3. Touch on the option to display/select an option.
4. Touch blank area of the screen to exit.
• Key color
Repeatedly press the control bar on the screen to select the key color.
• Rating
The unit has some watching level as followings:
(1) Kid safe: A movie rating that is condign to children.
(2) G: A movie rating that allows admission to persons of all ages.
(3) PG: A movie rating that allows admission of persons of all ages but suggests parental
guidance in the case of children.
(4) PG-13: A movie rating that allows admission of persons of all ages but
suggests parental guidance in the case of children under the age of 13.
(5) PG-R: PG-related.
(6) R: A movie rating that allows admission only to persons of a certain age, usually 17, unless
accompanied by a parent or guardian.
(7) NC-17: A movie rating that allows admission to no one under the age of 17.
(8) Adult: A movie rating that is condign to the adult only.
• DVD password
Some DVD discs have built-in parental lock which prevents children to watch some scenes as
force or eroticism especially.
The original password of the unit is null. You should set a new password ASAP.
Method of changing password:
1. Touch [DVD password] directly to open the onscreen keypad, touch the numeric buttons to
enter your password (original password for the first time) and then confirm.
2. Repeat the operation above to enter a new 4-digit password and then confirm. The new
password becomes effective and the parental lock is closed.
17
Setup
• Calibration
When the touch operation is not sensitive or valid, you should calibrate the touch screen through
TS CAL Screen function.
Adjust the response positions of the touch panel as followings:
1. Press the [Calibration] icon on the setup menu to enter.
2. Touch [ ] / [ ] to select [Enter].
3. Use a pointed object to touch the center of [ + ], the [ + ] will
move automatically.
4. Aim at center of [ + ],follow the path as shown of the figure,after
steps from 1 to 5,the system will exit calibrating automatically.
• Reset factory
To restore the default settings relating with DVD playback (e.g.: DVD Audio, DVD Subtitle), press
the [Reset factory] option to enter.
• Beep
On: Background sound of key-press is on.
Off: Background sound of key-press is off.
Radio Settings
• Radio area
Touch [ ]/[ ] to select the desired radio region.
Video Settings
• Rear camera
Touch [Rear camera] to select the desired image mode.
• Parking
When it is in Parking “On” mode, if you play the video disc, the
screen will appears “WARNING”. The above warning screen will
prevent the driver watching images.
• Dimmer mode
Touch [ ]/[ ] to select the desired dimmer mode.
OSD Settings
• OSD
Select one language that you are familiar with to display system
menu.
• DVD audio
Select one dialogue language that you are familiar with when playing
back DVD discs.
• DVD subtitle
Select one language that you are familiar with to display DVD subtitles.
18
Setup
• DVD menu
Select one language that you are familiar with to display DVD menu.
Note:
If the DVD disc has the file in the selected language, the dialogues you listened to will be in the
selected language.
If the DVD disc does not contain the file in the selected language, the dialogues you listened to
will be in the default language.
Volume Settings
You can set different volume for different modes.
1. Touch [Volume].
The volume setting sub-menu is displayed.
2. Touch on a source.
3. Touch [ ] / [ ] to assign the value.
When switches to the source, the volume increases automatically.
4. Touch the upper left corner of the screen to exit.
19
Other modes
Listen to Other Devices
You can connect an external audio/video device to be unit.
1. Connect the car audio to the device with the supplied AV cable.
2. Touch the upper left corner to display the main menu.
3. Touch [AV-IN1] / [AV-IN2].
4. Operated the connected the device(see the instructions manual of the device).
Tip:
If you connected the system to other audio device through the REAR OUT L/R connectot(see
“Connect wires” section), touch [AV-IN] to listen to that device.
Reset
When the unit hangs up, you can reset it.
Press RESET with a ball-point pen or similar tool.
Tip:
When the unit is reset, all the settings remain unchanged.
Replace a Fuse
If there is no power,the fuse may be damaged and need to be replaced.
1. Take out the unit from dashbpard.
2. Check the electric connection.
3. Buy a fuse that matches the voltage of the damaged fuse.
4. Replace the fuse.
GPS
1. Touch the upper left corner to display home menu.
2. Touch [Navigation], the navigation menu is display in a few seconds.
3. Refer to the map manual to operate the navigation tool.
20
Other modes
User-Defined Wallpaper
1. Touch the [ ] icon on the nether left of main menu to change
wallpaper.
2. Load picture from SD Card and use it as wallpaper
If you insert the SD Card with pictures in it after your entry, you
may have to wait several seconds for the SD Card reading.
Otherwise you may use it directly.
To Select a picture in SD Card, you should touch “ Browse SD Card” button first, then the
directories and the files will be listed. If you select a directory and then touch [ √ ] button, you
will enter the directory. If you select a picture and then touch [ √ ] button, the picture will be
loaded into the flash and used as current wallpaper at the same time.
Touch the button below [ √ ] to go back to view the pictures in flash.
Touch the button at the right side of the display of directory to go back to the upper directory.
3. Use or delete pictures in flash
After the 1st step, you can see the pictures in flash listed out, you can preview them by select
one of them, then touch the [ √ ] button to use it as wallpaper.
You can also delete pictures in flash which you are not currently using. Select one and touch
the garbage box button.
SWC
Press the desired function key of the list to the control button of the
SWC.
By the setting, you can use the button of the steering wheel to
control play, pause, select track etc.
Setting below:
To connect your steering wheel control device to the unit.
For example:
1. Touch“KEY 1”function ,
Touch [ ] / [ ] to select the function key [ Vol-] (shown as
below ).
2. The interface is displayed by touch [ ] again.
Press the [Vol-] and the opposite function key of the SWC function
key [Vol-] for one second, and ensure the opposite connection, then
disentangle.
21
Device connections
Parking Brake Cable Connections
22
Device connections
Installation Guide
Installation and uninstall
1. If relevant, remove any other audio system from the car.
2. Perform the required electrical connections:
- If necessary, connect the hand brake wire to your hand brake contact in order to activate the
Notes
video display when ofplaying
installation
a DVD (when the car is parked).
- Connect the wire that activates the reversing camera to the reversing sensor or to a reversing
1) Before
light. If necessary, installation,
connect please
your reversing maketosure
camera proper
the car connections
radio’s are conducted
reversing camera input
using a video and
cablethe
(notunit
supplied).
operates normally. Improper connection may result in
- Ensure that you now place the USB cable located at the back of the unit in such a way that it
damage to the
comes out of the dashboard or the unit.
glove box.
3. Then check that everything works
2) Use only accessoriesbefore installing
designed the main unit.
and manufactured for this unit and
4. R
emove the two screws on the top of the unit, otherwise, the unit will not work.
other unauthorized accessories may result
5. Install the car radio in the dashboard using the supplied screws (M5x6mm). in damage to the unit.
6. Attach the outer trim frame.
3) Before installation, please fasten all power cables.
If you are not sure how to install this unit correctly, contact a qualified technician.
4) DO NOT install the unit in the place where close to hot area to prevent
damage to electrical components such as the laser head.
5) Install the unit horizontally. Installing the unit more than 30 degree
vertically may result in worse performance.
6) To prevent electric spark, connect the positive pole first and then the
negative pole.
7) DO NOT block the cooling fan exit to ensure sufficient heating
Remove the
two screws dissipation of this unit, or it may result in damage to this unit.
Unit Installation
Main unit
Method ATrim frame
(1) Insert mounting bracket into dash board, choose appropriate mounting
tab according to the gap width, bending the mounting tab outwards
with a screwdriver to fix the mounting bracket in place.
( 2) Use 2 pieces of M5×5 cone shaped screw to fix two assemble bars
on both sides of the unit(see picture 1)
M5 X 5
(Picture 1)
( 3 ) Screw in 1 piece of M5×24 to the hole of the unit back and put on a
rubber sheath over the screw.(see picture 2)
23
35
Specifications
Geneal
Reference Supply Voltage.................................................................... 12V(DC)
Operating Voltage Range........................................................10.5 - 15.8V(DC)
Max Operating Current.................................................................................15A
Grounding System.................................................... Car Battery Negative Pole
Dimensions(WXHXD).................................................. 178X101.50X184.90mm
Weight(main unit).................................................................................... 1.95kg
FM
Signal Noise Ratio................................................................................. ≥60dB
Residual Noise Sensitivity(S/N=30dB)................................................. 18dBμV
Frequency Response(±3dB).....................................................40Hz~12.5KHz
Station Seeking Level..................................................................... 20~28dBμV
Distortion............................................................................................... ≤1.5%
Stereo Separation(1KHz)...................................................................... ≥25dB
Antenna Impedance....................................................................................75Ω
AM
Residual Noise Sensitivity (S/N=20dB)................................................ 30dBμV
Selectivity (±9KHz)................................................................................ ≥50dB
LCD
Screen size............................................................................... 6.2inches(16:9)
Display resolution.........................................................................800X480dots
Contrast radio.............................................................................................. 500
Brightness......................................................................................... 300cd/m2
DVD Player
Signal / Noise Ratio...................................................................................90dB
Dynamic Range.........................................................................................90dB
Distortion(line out)................................................................................. ≤0.1%
Frequency Response(±3dB)........................................................20Hz~20KHz
Maximum Output Power.........................................................................4×75W
Load Impedance............................................................................................4Ω
AUX IN
Distortion............................................................................................... ≤0.5%
Frequency Response(±3dB)........................................................20Hz~20KHz
Audio Input Level.....................................................................................1Vrms
Audio
Audio Output Impedance...........................................................................100Ω
Audio Output Level........................................................................ 4Vrms(Max)
Video
Normal Video Input Level(CVBS)........................................................1.0±0.2V
Video Input Impedance...............................................................................75Ω
Video Output Impedance.............................................................................75Ω
Video Output Level..............................................................................1.0±0.2V
Environment
Operating Temperature..............................................................-10°C ~ +60°C
Storing Temperature..................................................................-20°C ~ +70°C
Operating Humidity...................................................................... 45%~80%RH
Storing Humidity.......................................................................... 30%~90%RH
Note:
When the unit is operated extremely, such as operated with maximum power output for a long
time, or the temperature is over 70°C, it will enter heat protection mode, the volume will be lower
automatically. This is normal.
24
Specifications
Supported formats:
·USB or memory file format:FAT16,FAT32
·Mp3 bit rate(date rate):32-320 Kbps and variable bit rate
·WMA v9 or earlier
·Directory nesting up to a maximum of 8 levels
·Number of albums/folders:maximum 99
·Number of tracks/titles:maximum 999
·ID3 tag v2.0 or later
·File name in Unicode UTF8(maximum length:128 bytes)
Unsupported formates:
·Empty albums:an empty album is an album that does not contain MP3/WMA
files,and is not be shown in the display.
·Unsupported file formats are skipped.For example,Word documents(.doc) or
Mp3 files with extension.dlf are ignored and not played.
·AAC,WMV,PCM audio files
·DRM protected WMA files(.wav,.m4a,.m4p,.mp4,.aac)
·WMA files in Lossless format
Region code
According to DVD sale region, the whole world is divided into six regions. A DVD disc can be
played back only when its region code is compatible with that of the player in use.
Region 1: USA, Canada, East Pacific Ocean Islands;
Region 2: Japan, West Europe, North Europe, Egypt, South Africa, Middle East;
Region 3: Taiwan of China, Hong Kong of China, South Korea, Thailand, Indonesia, South East
Asia;
Region 4: Australia, New Zealand, Mid & south America, South Pacific Ocean Islands/Oceania;
Region 5: Russia, Mongolia, India, Middle Asia, East Europe, North Korea, North Africa, North
West Asia;
Region 6: Chinese Mainland.
25
Troubleshooting
Warning
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the following points before requesting
service. If the problem remains unsolved, please contact your dealer.
No power
∙ Car engine has not been started. Start the car engne.
∙ Connections is ncorrect.
∙ Fuse has been damaged. Replace fuse.
No sound
∙ Volume is too low. Adjust volume.
∙ Speaker connections is incrrect.
No image
∙ Parking brake wire connection is incorrect. Check the parking wiring.
Noise in broadcasts
∙ Signals are too weak. Select other stations with stronger signals.
∙ Check the connection of the car antenna.
∙ Change broadcast from stereo to mono.
26
Troubleshooting
Fuse is broken
∙ The Fuse type is incorrect. Replace it with a 15A fuse.
∙ Speaker wire or power wire is grounded.
Check the connections.
27
Appendix
Overall Wiring Diagram
28
CLASS 1
LASER PRODUCT