Beruflich Dokumente
Kultur Dokumente
Page 1
Section KLAUS Multiparking GmbH
Dimensions Hermann-Krum-Straße 2
Car data D-88319 Aitrach
Fon +49 (0 ) 75 65 5 08-0
Fax +49 (0 ) 75 65 5 08-88
Outdoor installation
Page 2
Width dim. info@multiparking.com
Function www.multiparking.com
Approach
Dimensions
Page 3
All space requirements are minimum
finished dimensions.
Load per
park. space
Load plan Tolerances for space requirements + 30 . 3
Dimensions in cm.
Page 4 EB (single platform) = 3 vehicles
Electrical DB (double platform) = 6 vehicles
installation
Technical
Suitable for
data Barrier 8
Standard passenger cars:
Limousine, station wagon, SUV, van
Page 5
according to clearance and maximal
surface load.
To be perfor-
med by the
customer
Description Standard Special 2
Clearance profile
160 30
Cutting through 5
45
55
see table
15° 13°
6°
100 125
500 (520)
Grounding 6
Water drainage 7 10
1-2% 1-2%
335
350
370
355
375
car height car height car height car height car height car height
middle level lower level middle level lower level middle level lower level
150 150 160 160 170 170
To the extent that the conditions of the construction do not restrict the height, the car height on the upper parking
slots is not restricted.
Page 2
Width dim. EB DB EB DB
Function
Approach
Page 3 B1 B1 B1 Carriageway in
Load per
accordance with
park. space usable platform width B1 usable platform width B1 usable platform width B1 local regulations
Load plan 230 260 460 500 230 + 460 760
240 270 470 510 240 + 470 780
250 280 480 520 250 + 480 800
Page 4 260 290 490 530 250 + 500 820
Electrical 270 300 500 540 270 + 500 840
installation
Technical
data For parking boxes on the edges and boxes with intermediate walls we recommend our maximum platform width of 270 cm
for single platforms and 500 for double platforms. Problems may occur if smaller platform widths are used (depending on
Page 5 car type, access and individual driving behaviour and capability).
To be perfor-
med by the For larger limousines and SUV wider driveways are necessary (in particular on the boxes on the sides due to the missing
customer manoeuvring radius).
Description
Function
System lifted System in middle position System lowered
Approach
maximum maximum
descending ascending
slope 4 % slope 14 %
The illustrated maximum approach angles must not be exceeded. Incorrect approach angles will cause serious
maneouvring & positioning problems on the parking system for which the local agency of KLAUS Multiparking
accepts no responsibility.
MultiBase G63 Outdoor installation | Code number 586.50.230-002 | Version 11.2015 Page 3 of 5
Page 1
Load per parking space
Section
Dimensions For countries where snow loads For countries where snow loads is
Car data are a crucial factor no relevant factor
Page 2 MultiBase G63 2,0 to. (EB + DB) MultiBase G63 2,0 to. (EB + DB)
Width dim.
Function
parking spaces weight wheel load parking spaces weight wheel load
Approach upper parking space 1500 kg 375 kg upper parking space 2000 kg 500 kg
middle parking space 2000 kg 500 kg middle parking space 2000 kg 500 kg
Page 3 lower parking space 2000 kg 500 kg lower parking space 2000 kg 500 kg
Load per
park. space MultiBase G63 2,5 to. (only EB) – for extra charge MultiBase G63 2,5 to. (only EB) – for extra charge
Load plan
parking spaces weight wheel load parking spaces weight wheel load
upper parking space 2000 kg 500 kg upper parking space 2500 kg 625 kg
Page 4
Electrical
middle parking space 2500 kg 625 kg middle parking space 2500 kg 625 kg
installation lower parking space 2500 kg 625 kg lower parking space 2500 kg 625 kg
Technical
data
Applies to a snow depth of 20 cm; in case of larger snow depths the snow must be removed.
Page 5
To be perfor-
med by the
customer
Description
Load plan
lateral support 12
F4 F5 F5 F5 F5
H1
F2 F2 F2 F2
F3 F4 F4 F3 F3 F4 F4 F3
F1 F1 F1 F1
F5 F3 F6
250
F2 F1 EB DB
F6 F6 F6 F6
Marking 14 Marking 14
82 216
10 10 10 10
10
520 (540) B1 13 B1 13
12 The system must be laterally supported on both sides. If there are no walls on the sides, an additional stand must be attached.
For this stand, a base area of 40 x 25 cm is required (quality minimum C20/25).
13 Dimension B1 see page 2
14 Marking compliant to ISO 3864 (colors used in this illustration are not ISO 3864 compliant)
15 All forces in kN
MultiBase G63 Outdoor installation | Code number 586.50.230-002 | Version 11.2015 Page 4 of 5
Page 1
Electrical installation
Section
Dimensions Installation diagram Electrical data (to be performed by the customer)
Car data
1 No. Qunatity Description Position Frequency
1 1 Electricity meter in the supply
Page 2 2 line
Width dim.
Function 3 2 1 Main fuse: 3 x fuse 20 A (slow) in the supply 1 per unit
or circuit breaker 3 x 20 A line
Approach 5 (trigger characteristic K or C)
4 3 1 Supply line 5 x 2.5 mm2 to main switch 1 per unit
Page 3 (3 PH + N + PE) with marked
wire and protective conductor
Load per
park. space 13 4 1 Lockable main switch defined at the 1 per unit
Load plan plan evaluation
11 5 1 Supply line 5 x 2.5 mm2 from main 1 per unit
(3 PH + N + PE) with marked wire switch to unit
Page 4 and protective conductor
180
Electrical
12 Stand for 6 every Foundation earth connector corner pit
installation 10 m floor
Technical
10 operating device
7
120
data 1 Equipotential bonding in accordance 1 per
0,00 with DIN EN 60204 from foundation system
earth connector to the system
Page 5
Technical data
Field of application CE Certification
By default, the system can only be used for a fixed number of The systems offered correspond to DIN EN 14010 and the
users. EC Machinery Directive 2006/42/EG.
If different users use the system – only on the upper parking Operating device
spaces – (e.g. short-time parkers in office buildings or hotels)
the Multiparking system needs to be adjusted. If required, The home and off position of the system must always be in the
would you please contact us. lowered position. Special controls with key interlock are required
that ensure that the key can only be removed when the system
Units has been lowered to its lowest position. Depending on the
Low-noise power units mounted to rubber-bonded-to metal conditions of the construction project, a stand may be necessary
mountings are installed. Nevertheless we recommend that parking for the control elements (at an extra charge).
system’s garage be built separately from the dwelling. If it is not Sound insulation
possible to install the hydraulic power units with the solenoid valves
in adjacent buildings or spaces, the power unit and the solenoid According to DIN 4109 (Sound insulation in buildings), para. 4,
valves must be housed in a cabinet (at an extra charge). annotation 4, KLAUS Multiparkers are part of the building services
(garage systems).
Available documents
– wall recess plans Normal sound insulation:
– maintenance offer/contract DIN 4109, para. 4, Sound insulation against noises from building
– declaration of conformity services.
– test sheet on airborne and slid-borne sound
Table 4 in para. 4.1 contains the permissible sound level values
Building application documents emitted from building services for personal living and working
According to LBO and GaVo (garage regulations) the Multiparking areas. According to line 2 the maximum sound level in personal
systems are subject to approval. We will provide the required living andworking areas must not exceed 30 dB (A).
building application documents. Noises created by users are not subject to the requirements
(see table 4 , DIN 4109).
Corrosion protection
See separate sheet regarding corrosion protection. The following measures are to be taken to comply with this value:
– Sound protection package according to offer/order
Care (KLAUS Multiparking GmbH)
To avoid damages resulting from corrosion, make sure to follow – Minimum sound insulation of building R’w = 57 dB
our cleaning and care instructions and to provide good ventilation (to be provided by customer)
of your garage.
Increased sound insulation (special agreement):
Gap covers
Draft DIN 4109-10, Information on planning and execution,
Any existing gaps between the systems or the platforms and the proposals for increased sound insulation.
walls of the pit must be reduced to approx. 10 cm by installing
sheet-metal covers (at an extra charge). Agreement: Maximum sound level in personal living and working
areas 25 dB (A). Noises created by users are not subject to the
Environmental conditions requirements (see table 4, DIN 4109).
Environmental conditions for the area of multiparking systems: The following measures are to be taken to comply with this value:
Temperature range –20 to +40° C. Relative humidity 50% at a
– Sound protection package according to offer/order
maximum outside temperature of +40° C.
(KLAUS Multiparking GmbH)
If lifting or lowering times are specified, they refer to an
environmental temperature of +10° C and with the system set – Minimum sound insulation of building R’w = 62 dB
up directly next to the hydraulic unit. At lower temperatures or (to be provided by customer)
with longer hydraulic lines, these times increase. Note: User noises are noises created by individual users in our
Multiparking systems. These can be noises from accessing the
platforms, slamming of vehicle doors, motor and brake noises.
MultiBase G63 Outdoor installation | Code number 586.50.230-002 | Version 11.2015 Page 5 of 5
Page 1
To be performed by the customer
Section
Dimensions Safety fences Marking
Constraints according to DIN EN ISO 13857 must be put in place According to DIN EN 14010, a warning that identifies this
Car data
on three sides (all except the entrance side), unless buildings border danger area must be placed in the entrance area that conforms
Page 2 the pit. to ISO 3864. This must be done according to EN 92/58/EWG
Width dim.
Numbering of parking spaces for systems with a pit (platforms within the pit) 10 cm from the
Function edge of the pit.
Approach Consecutive numbering of parking spaces.
Wall cuttings
Building services
Any necessary wall cuttings according to page 1.
Any required lighting, ventilation, fire extinguishing and fire alarm
Page 3
Load per
park. space systems as well as clarification and compliance with the relevant Electrical supply to the main switch / Foundation earth connector
Load plan
regulatory requirements. Suitable electrical supply to the main switch and the control wire
Drainage line must be provided by the customer during installation. The
functionality can be monitored on site by our fitters together with
For the front area of the pit we recommend a drainage channel,
Page 4
the electrician. If this cannot be done during installation for some
which you connect to a floor drain system or sump (50 x 50 x 20 cm).
Electrical reason for which the customer is responsible, the customer must
installation The drainage channel may be inclined to the side, however not the
commission an electrician at their own expense and risk.
Technical pit floor itself (longitudinal incline is available). For reasons of
data
environmental protection we recommend to paint the pit floor, and In accordance with DIN EN 60204 (Safety of Machinery. Electrical
to provide oil and petrol separators in the connections to the public Equipment), grounding of the steel structure is necessary, provided
Page 5
sewage network. by the customer (distance between grounding max. 10 m).
To be perfor-
If the following are not included in the quotation, they will
Strip footings
med by the
customer also have to be provided / paid for by the customer:
Description If due to structural conditions strip footings must be effected, the
customer shall provide an accessible platform reaching to the top – Mounting of contactor and terminal box to the wall valve,
of the said strip footings to enable and facilitate the mounting work. complete wiring of all elements in accordance with the circuit
diagram
– Costs for final technical approval by an authorized body
– Main switch
– Control line from main switch to hydraulic unit