Beruflich Dokumente
Kultur Dokumente
TECHNICAL DATASHEET
Pacific®CSV
Cast Steel Valves
The new Pacific®CSV valves have been redesigned to Gate Valve Features include:
improve performance and have undergone Crane’s rigorous • Fully-guided wedge ensures smooth operation in both
development and testing process. These valves exceed horizontal and vertical orientations to deliver improved
industry fugitive emissions standards. Each Pacific valve is resistance to sticking.
uniquely built and tested per API 598 standards, delivering • Modular stuffing box facilitates changeover for low fugitive
superior performance in the most challenging conditions. emissions and monitoring port options.
• Live loading option extends fugitive emissions performance
Certifications: by eliminating the need for manual packing adjustment.
• API 624
• API RP 591 Globe Valve Features include:
• API 622 • Uniquely designed line contact between disc and seat
• CE/PED results in lower seating torque, permitting faster set up.
• Indian Boiler Regulation (IBR) • The guided disc option facilitates seating during turbulent
• ISO 15848-1 flow conditions.
• ISO 9001:2008 • Integral ISO 5210 mounting is available in larger sizes for ease
of actuation.
These valves comply with the applicable requirements of the
following standards: Swing Check Valve Features include:
• API 600 • Disc fastener is restrained by the bonnet to eliminate the
• API 623 risk of a displaced disc and prevent damage to downstream
• API 594 equipment.
• API 598 • Internal hung disc pin arrangement eliminates leak path
• ASME B 16.34 from pressure boundary.
• ASME B 16.10 • Modular design enables easy change to an optional external
• ASME B 16.5 pin arrangement if counterweights are required.
• ASME B 16.25
Cast steel bolted bonnet valves described in this catalog are typically manufactured of carbon steel. When specified, the valves are
available in the alloys shown below which are suitable for steam, water, oil, oil vapor, gas and general services. Please contact factory
or customer service for availability and material breakdowns.
Trim Material
3 Disc
ASTM A216, WCB 13
W/ AWS 5.9 ER410
4 Stem ASTM 182. F6a 20
Class 150: SS 316 Corr.
5 Gasket Class 300: Spiral Wound SS 19
Class 600: Ring Type
18 12
6 Bonnet ASTM A216, WCB
7 Nut ASTM A194, 2H 17 11
8 Stud ASTM A193, B7 16 10
9 Backseat Bushing ASTM A276, T410
9
10 Spacer ASTM A276, T410
Graphite: 2 braided;
15 6
11 Packing
3 Die-Formed
7 5
12 Packing Gland ASTM A276, T410
4
13 Grease Fitting Steel
8
14 Handwheel Nut ASTM A536, Gr.65-45-12
3
15 Pin Zinc Plated Steel
16 Eye Bolt ASTM A 194 2H
2
17 Gland Flange ASTM A216 WCB
18 Packing Nuts ASTM 307 Zinc Plated
1
19 Stem Nut ASTM A439 Gr. D2
20 Retainer Nut ASTM A536 Gr. 65-45-12
21 Handwheel Carbon Steel/Ductile Iron
M M
L L
SECTION J-J
15 Eye Bolt
ASTM A307 Gr. A or 3
Gr. B, Zinc Plt.
2
16 Nut ASTM A194, 2H
M M
H
H Figure B1- Class 150
Figure B3- Class 300
Figure B6- Class 600
L L
8 13
7
11
6
14 10
4
3
Figure C1- Class 150
2 Figure C3- Class 300
Figure C6- Class 600
1
L L
* “Special Class” applies to weld-end valves only and requires NDE testing in accordance with ASME B16.34 - 2013.
ASTM A217 GR C5
STANDARD CLASS B16.34 - 2013 SPECIAL CLASS B16.34 - 2013
°F 150
MAXIMUM NON-SHOCK WORKING PRESSURE, PSIG
300 600 900 1500 2500 150
MAXIMUM NON-SHOCK WORKING PRESSURE, PSIG
300 600 900 1500 2500
-20 to 100 290 750 1500 2250 3750 6250 290 750 1500 2250 3750 6250
200 260 750 1500 2250 3750 6250 290 750 1500 2250 3750 6250
300 230 730 1445 2185 3640 6070 290 750 1500 2250 3750 6250
400 200 705 1410 2115 3530 5880 290 750 1500 2250 3750 6250
500 170 665 1330 1995 3325 5540 290 750 1500 2250 3750 6250
600 140 605 1210 1815 3025 5040 290 750 1500 2250 3750 6250
650 125 590 1175 1765 2940 4905 290 750 1500 2250 3750 6250
700 110 570 1135 1705 2840 4730 280 735 1465 2200 3665 6110
750 95 530 1065 1595 2660 4430 280 730 1460 2185 3645 6070
800 80 510 1015 1525 2540 4230 275 720 1440 2160 3600 6000
850 65 485 975 1460 2435 4060 260 615 1225 1840 3065 5105
900 50 375 745 1120 1870 3115 230 465 935 1400 2335 3895
950 35 275 550 825 1370 2285 170 345 685 1030 1715 2855
1000 20 200 400 595 995 1655 125 250 495 745 1245 2070
1050 20(a) 145 290 430 720 1200 90 180 360 540 900 1500
1100 20(a) 100 200 300 495 830 60 125 250 375 620 1035
1150 20(a) 60 125 185 310 515 40 75 155 230 385 645
1200 15(a) 35 70 105 170 285 20 45 85 130 215 355
NOTE: Use normalized and tempered material only. The deliberate addition of any element not listed in ASTM
A217, Table 1 is prohibited, except that Ca and Mg may be added for deoxidation.
(a) Flanged end valve ratings terminate at 1000°F (537°C).
* “Special Class” applies to weld-end valves only and requires NDE testing in accordance with ASME B16.34 - 2013.
How
RDERING To Order
INFORMATION
First 11 Figure Number Characters*
Mounting
Schedule
Operator
Weld End
Material
Class
Type
Trim
Size
End
Prep
1 2 A 1 A 8 H F 4 B 0
*The remaining 6 characters are used for Options, Features, Special Material Processes and Special Requirements. N is used to signify “No” requirement.
Figure Number Rules for Size, Type and Class Figure Number Rules for Material
(first 4 characters) (5TH character)
ZE 02
SIZE
2"
TYPE
TYPE CLASS
No. ASTM
MATERIAL
Material
02 2" 2H
03
2.5"
3"
A
B A GATE
GATE (Flex-Wedge)
GLOBE (T-Globe)
1
3
150#
300#
A
B
A216 WCB
A352 LCB
Carbon Steel
Low Carbon Steel
2H 2.5" 04
–
4"
–
C
B GLOBE
CHECK (Swing type) 6 600#
C A352 LCC Low Carbon Steel
24 24"
5 5 HF / HF(2)
(4)
Alloy 6 13 Cr (410)
N
P
A351 CF3M
A351 CG8M
316L SS
317 SS
9 9 Monel® / Monel® Monel® Monel®
8 8* 13 Cr / Alloy 6 13 Cr (410) Q A351 CG3M 317L SS
F6 / HF (1)(2)
1 11 Monel® / HF (4)(2) Monel® / Alloy 6 Monel® R A351 CF8C 347 SS
2 12 316 / HF (3)(2) 316SS / Alloy 6 316 SS W CD3MN Duplex 1B
LASS
6 16 316/HF / 316/HF (3)(2) 316SS / Alloy 6 (both) 316 SS X CD3MWCuN Duplex 4A
E 8 to NACE MR0103 / MR0175 (1) 13% Chromium AISI Type 410 Stainless Steel.
(2) Hard Facing is weld deposited Cobalt base alloy Y CD4MCuN Duplex 6A
N 12 to NACE MR0103 / MR0175 (3) Ni-Cr-Mo stainless steel in the AISI Type 316 category
1 150#
Z Special / Custom (4) Ni-Cu Alloy
* Standard Offering
S
Z
A351 CN7M
Special
Alloy 20
3 300#
6 Figure
600# Number Rules for Operator, Valve Ends, Schedule and Figure Number Rules for Mounting
Weld End Prep (7TH, 8TH, 9TH & 10
th characters) (11TH character)
OPERATOR SCHEDULE MOUNTING
0 N/A (e.g. check valves) 0 = N/A (e.g. flanged end) F = Schedule 60 0 = N/A(1)
D = Schedule STD G = Schedule 80(2) 1 = F10 A = FA10
ATERIAL
H Handwheel
G Bevel Gear A = Schedule 10 H = Schedule XS 2 = F12 B = FA12
S Bare Stem B = Schedule 10S J = Schedule 100 3 = F14 C = FA14
P Pneumatic Cylinder C = Schedule 20 X = Different Inlet & Outlet
No. E ASTM
Electric Motor Customer Material Classification
K = Schedule 30 Z = Custom
4 = F16
5 = F25
D = FA16
E = FA25
C Supplied E = Schedule 4(1)
A M A216
Electric WCB
Motor with Bevel Gear Carbon Steel
(1) same as Schedule STD for size 2" - 10"
6 = F30
7 = F35
F = FA30
G = FA35
Y Hydraulic Actuator Special /
D Z A217
Custom WC6 1 ¼ CR, ½ Mo
(2) same as Schedule XS for size 2" - 8"
8 = F40 H = FA40
Z = Other / Special
E A217 WC9 2 ¼ CR, 1 Mo
(1) e.g. Handwheel / Check Valve
WELD END PREP
VALVE ENDS 0 = N/A (e.g. flanged end)
F A217 C5 5%
B = 2BCR, ½ Mo
0r 3B Based on wall thickness SPECIAL REQUIREMENT (digit 17)
F Raised Face C = 2C or 3C Based on wall thickness
G W A217 C12
Butt Weld End 9% CR, 1 Mo
Z = Custom
N = None
2 = API 600 12TH edition
M = MSS SP-61 testing
Z = Other
? A352 LCC Low Carbon Steel C = CE/PED
CPE-PACIFIC-CSV-TDS-EN-LT-2018_01_03
Crane Co., and its subsidiaries cannot accept responsibility for possible errors in catalogues, brochures, other printed materials, and website information. Crane
Co. reserves the right to alter its products without notice, including products already on order provided that such alteration can be made without changes being
necessary in specifications already agreed. All trademarks in this material are property of the Crane Co. or its subsidiaries. The Crane and Crane brands logotype,
in alphabetical order, (ALOYCO®, CENTER LINE®, COMPAC-NOZ®, CRANE®, DEPA®, DUO-CHEK®, ELRO®, FLOWSEAL®, JENKINS®, KROMBACH®, NOZ-CHEK®, PACIFIC
VALVES®, RESISTOFLEX®, REVO®, SAUNDERS®, STOCKHAM®, TRIANGLE®, UNI-CHEK®, WTA®, and XOMOX®) are registered trademarks of Crane Co. All rights reserved.