Beruflich Dokumente
Kultur Dokumente
www.rehau.com Construction
Automotive
Industry
TABLE OF CONTENTS
Scope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Pressure Loss Tables (supersede all previously published friction loss tables)
Table 1: With 100% Water. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Table 2: With Water+20% Propylene Glycol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 3: With Water+50% Propylene Glycol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
For updates to this publication and the most current REHAU technical guidelines, safety information and manufacturer’s recommendations,
visit na.rehau.com/resourcecenter
2 855.681 en 03.2015
SCOPE
This technical information applies to the planning, installation The designer should also review the pertinent REHAU technical
and connection of REHAU sustainable products using REHAU's instructions and the REHAU PEXa Limited Warranty before beginning
extensive range of PEXa pipes. to design a system with PEXa pipes.
Pressure loss tables are typically used when manually designing PEXa After reading the appropriate REHAU Design Guide, designers should
piping systems for hydronic applications including radiant heating/ attend the Skill Builders Complete seminar offered by the REHAU
cooling, snow and ice melting, soil conditioning, geothermal ground Academy, where design techniques are more fully explored. Design-
loops, PEX plumbing and water service, energy transfer and outdoor ers should also periodically check the REHAU Resource Center for the
wood boiler. These tables are used to properly size the circulator for latest updates to the technical instructions.
the PEXa pipes. The designer must ensure the flow requirement and
pressure loss are within the circulator's performance capability. Use If you do not have prior experience with hydronic heating systems or
the REHAU LoopCAD® Software which includes a built-in calculator for require additional assistance, please contact your regional REHAU
pipe pressure losses for additional data not found in these tables. sales office.
855.681 en 03.2015 3
Table 1A:Pressure
Table 1A: Pressure Loss
Loss for for Inch-Sized
Inch-Sized SDR9 SDR9
REHAUREHAU PEXaPipe
PEXa Carrier Carrier Pipe Water
with 100% With 100% Water
4 855.681 en 03.2015
Table 1B:Pressure
Table 1B: Pressure Loss
Loss for for Inch-Sized
Inch-Sized SDR9 SDR9
REHAUREHAU PEXaPipe
PEXa Carrier Carrier Pipe Water
with 100% With 100% Water
855.681 en 03.2015 5
Table 1C: Pressure
Table 1C: Pressure Loss
Loss for for Metric-Sized
Metric-Sized SDR11SDR11
REHAU REHAU PEXaPipe
PEXa Carrier Carrier PipeWater
with 100% With 100% Water
6 855.681 en 03.2015
Table 1D:Pressure
Table 1D: Pressure Loss
Loss for for Metric-Sized
Metric-Sized SDR11SDR11
REHAU REHAU PEXaPipe
PEXa Carrier Carrier PipeWater
with 100% With 100% Water
– To express pressure loss in terms of feet of head, multiply the table value by 2.307.
Example: 1 psi = 2.307 ft of head.
855.681 en 03.2015 7
Table 1E: Pressure Loss for Metric-Sized SDR11 REHAU PEXa Carrier Pipe With 100% Water
Table 1E
– Flow velocity above 8 fps (2.5 m/s) might result in excessive pressuremultiply
pressure loss, noise or
loss, the
noise
value
or erosion of the system components.
erosion of system Example: for 200 listed by 2.307.
– Table values shown in pressure loss units
components. lineal ftof
of psi
pipe,per 100 ft (30.5 m) of pipe.
Example: for 200 lineal ft of pipe, double the value listed in this table.Example: 1 psi =
double the value
listed in this table. 2.307 ft of head
– To express pressure loss in terms of feet of head, multiply the table value by 2.307.
Example: 1 psi = 2.307 ft of head.
8 855.681 en 03.2015
Table 2A:Pressure
Table 2A: Pressure Loss
Loss for for Inch-Sized
Inch-Sized SDR9 SDR9
REHAUREHAU PEXaPipe
PEXa Carrier Carrier PipeWater
with 80% With/ 20%
80%Propylene
Water / 20%
GlycolPropylene Glycol
855.681 en 03.2015 9
Table 2B: Pressure
Table 2B: Pressure Loss
Loss for for Inch-Sized
Inch-Sized SDR9 SDR9
REHAUREHAU PEXaPipe
PEXa Carrier Carrier PipeWater
with 80% With/ 80% Water / 20%
20% Propylene GlycolPropylene Glycol
10 855.681 en 03.2015
Table
Table 2C: PressureLoss
2C: Pressure Loss
for for Metric-Sized
Metric-Sized SDR11SDR11
REHAU REHAU PEXaPipe
PEXa Carrier Carrier PipeWater
with 80% With/ 20%
80%Propylene
Water / Glycol
20% Propylene Glycol
855.681 en 03.2015 11
Table 2D:Pressure
Table 2D: Pressure Loss
Loss for for Metric-Sized
Metric-Sized SDR11SDR11
REHAU REHAU PEXaPipe
PEXa Carrier Carrier PipeWater
with 80% With/ 20%
80%Propylene
Water / Glycol
20% Propylene Glycol
12 855.681 en 03.2015
Table 2E: Pressure Loss for Metric-Sized SDR11 REHAU PEXa Carrier Pipe With 80% Water / 20% Propylene Glycol
Table 2E:
– Flow velocity above 8 fps (2.5 m/s) might result in excessive pressurepressure
8 feet per second may be loss in units of
loss, noise
loss in
or erosion of the system components.
considered excessive and psi per 100 ft terms of
– Table values
may resultshown in pressure loss units
in excessive of psi per 100 ft (30.5 m) offeetpipe.
of pipe. of head,
Example: for 200 lineal ft of pipe, double the value listed in this table.multiply the value
pressure loss, noise or
erosion of system Example: for 200 listed by 2.307.
– To express pressure loss in terms of feet
components. linealof head,
ft of pipe, multiply the table value by 2.307.
855.681 en 03.2015 13
Table 3A:Pressure
Table 3A: Pressure Loss
Loss for for Inch-Sized
Inch-Sized SDR9 SDR9
REHAUREHAU PEXaPipe
PEXa Carrier Carrier PipeWater
with 50% With/ 50%
50%Propylene
Water / 50%
GlycolPropylene Glyco
14 855.681 en 03.2015
Table 3B:Pressure
Table 3B: Pressure Loss
Loss for for Inch-Sized
Inch-Sized SDR9 SDR9
REHAUREHAU PEXaPipe
PEXa Carrier Carrier PipeWater
with 50% With/ 50%
50%Propylene
Water / Glycol
50% Propylene Glycol
855.681 en 03.2015 15
Table
Table 3C: PressureLoss
3C: Pressure Loss
for for Metric-Sized
Metric-Sized SDR11SDR11
REHAU REHAU PEXaPipe
PEXa Carrier Carrier PipeWater
with 50% With/ 50%
50%Propylene
Water / Glycol
50% Propylene Glycol
16 855.681 en 03.2015
Table 3D:Pressure
Table 3D: Pressure Loss
Loss for for Metric-Sized
Metric-Sized SDR11 SDR11 REHAU
REHAU PEXa PEXa
Carrier Carrier
Pipe Pipe
with 50% With
Water 50%
/ 50% Water /Glycol
Propylene 50% Propylene Glycol
855.681 en 03.2015 17
Table 3E: Pressure Loss for Metric-Sized SDR11 REHAU PEXa Carrier Pipe With 50% Water / 50% Propylene Glycol
Table 3E:
– Flow velocity above 8 fps (2.5 m/s) might result in excessive pressurepressure
8 feet per second may be loss in units of
loss, loss
noisein
or erosion of the system components.
considered excessive and psi per 100 ft terms of
– Table may
values
resultshown in pressure loss units
in excessive of pipe.of psi per 100 ft (30.5 m) of feetpipe.
of head,
Example: for 200 lineal ft of pipe, double the value listed in this table.multiply the value
pressure loss, noise or
erosion of system Example: for 200 listed by 2.307.
– To express pressure loss in terms of feet
components. lineal of
ft ofhead,
pipe, multiply the table value by 2.307.
18 855.681 en 03.2015
For updates to this publication, visit na.rehau.com/resourcecenter
The information contained herein is believed to be reliable, but no representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications or the results to be obtained therefrom. Before
using, the user will determine suitability of the information for user’s intended use and shall assume all risk and liability in connection therewith. © 2015 REHAU