Sie sind auf Seite 1von 2

Subject Over Speed Setting

increase

VR2

【PCB, 65.61750-6008】
How to adjust the Over Speed
Please see below table to set a device VR2

☞ Clockwise → Resistance increase , Anticlockwise → Resistance decrease


※ Setting values : 1,200rpm±3% ※ Over Speed Spec : Rating R.P,M 120%
Note: After Over Speed Test, VR2 must convert the resistance value to the initial value.
Frequency(Hz) & Resistance(㏀) graph
4
3.5
3
)

㏀ 2.5
2
(


저 1.5
1
0.5
0 100 200 300 400 500 600 700 Frequency(Hz)
Resistance value (㏀)
Over Speed values Test Mode values Rating Speed values
Model
rpm Hz ㏀ rpm Hz ㏀ rpm Hz ㏀
L086TIH 2520 596 3.09 1200 284 1.47 2100 497 2.58
L086TIM 2760 653 3.39 1200 284 1.47 2300 544 2.82
L086TIL 3000 710 3.68 1200 284 1.47 2500 591 3.07
MD196T 2400 568 2.95 1200 284 1.47 2000 473 2.46
MD196TI 2400 568 2.95 1200 284 1.47 2000 473 2.46
L126TIH 2400 568 2.95 1200 284 1.47 2000 473 2.46
L126TIM 2520 596 3.09 1200 284 1.47 2100 497 2.58
V158TIH 2160 511 2.65 1200 284 1.47 1800 426 2.21
V158TIM 2520 596 3.09 1200 284 1.47 2100 497 2.58
V158TIL 2760 653 3.39 1200 284 1.47 2300 544 2.82
V180TIH 2160 581 3.02 1200 323 1.67 1800 484 2.51
V180TIM 2520 678 3.52 1200 323 1.67 2100 565 2.93
V180TIL 2760 742 3.85 1200 323 1.67 2300 619 3.21
V222TIH 2160 581 3.02 1200 323 1.67 1800 484 2.51
V222TIM 2520 678 3.52 1200 323 1.67 2100 565 2.93
V222TIL 2760 742 3.85 1200 323 1.67 2300 619 3.21
ial value.

Das könnte Ihnen auch gefallen