Beruflich Dokumente
Kultur Dokumente
638 Arc welding power sources, equipment and accessories. 23.9.4 (b)(v)
(2 Parts)
873 Road traffic signs and internally illuminated 23.4, 23.5, 23.6
Bollards (5 Parts)
1109 Specification for cold forged mild steel rivets for 22.2.4
cold closing
1377 Methods of test for soils for civil engineering 2.4.1, 2.4.2 (c)
purposes (9 parts) Table 2.1
1707 Specification for hot binder distributors for road 16.4.6 (a)
surface dressing
4320 Specification for metal washers for general 23.9.4 (d) (ii)
engineering purposes. Metric series
4486 Specification for hot rolled and hot rolled and 21.3.1 (a)
processed high tensile alloy steel bars for the
prestressing of concrete
4604 Specification for the use of high strength friction 22.5.4, 22.5.10
grip bolts in structural steelwork. Metric series (2 Parts)
4840 Rigid polyurethane (PUR) foam in slab form 24.6.1 (b) (iv)
5896 Specification for high tensile steel wire and strand 21.3.1 (a)
for the prestressing of concrete
5911 Concrete pipes and ancillary concrete products 8.2.1 (a), (c), (g)
(6 Parts) Table 8.1
6088 Specification for solid glass beads for use with 23.7.4 (b) & (c)
road marking compounds and for other industrial uses 23.8.4
The following Standards have been adopted from the British Standards Institute (BSI),
European Standards (EN) and in some cases from the International Standards Organisation
(ISO) and are referred to in the Specification. Other international standards are also included
in this section.
BS EN ISO 591 Titanium dioxide pigments for paints. Specifications 23.7.2 (a)
and methods of test
BS EN 933 Tests for geometrical properties of aggregates Tables 2.2 & 2.3
BS EN 1008 Mixing water for concrete. Specification for sampling, 2.10.1, 15.3.4
testing and assessing the suitability of water, including 18.3.4
water recovered from processes in the concrete
industry, as mixing water for concrete
BS EN 1339 Concrete paving flags. Requirements and test methods 11.3, 11.7
BS EN 1423 Road marking materials. Drop on materials. Glass 23.7.4 (b) & (c)
beads, antiskid aggregates and mixtures of the two 23.8.4
BS EN ISO 1461 Hot dip galvanized coatings on fabricated iron and 22.5.13 (c)
steel articles. Specifications and test methods 23.9.4 (e), 24.8
BS EN 1916 Concrete pipes and fittings, unreinforced, steel fibre 8.2.1 (f)
and reinforced
BS EN 10025 Hot rolled products of non-alloy structural steels 23.9.1 (a) (ii)
BS EN 10223 Steel wire and wire products for fences (7 Parts) 8.17
BS EN 10244 Steel wire and wire products. Non-ferrous metallic 8.17, 23.3
coatings on steel wire (6 parts) 24.8
BS EN ISO 11600 Building construction. Jointing products. Classification 24.6.1 (c) (ii)
and requirements for sealants 24.6.1 (c) (iii)
BS EN 12899 Fixed, vertical road traffic signs. Fixed signs 23.4, 23.5
BS EN 14188 Joint fillers and sealants. Specifications for hot applied 24.6.1
sealants
ASTM Standards
D 244 Standard Test Methods and Practices for Emulsified 2.13.2 (c)
Asphalts
D 1310 Standard test method for flash point and fire 2.13.2 (b)
point of liquids by Tag open-cup apparatus
D 1754 Standard test method for effect of heat and air on 2.13.2 (b)
asphaltic materials (thin-film oven test)
D 2726 Standard test method for bulk specific gravity and 2.14.2
density non-absorptive compacted bituminous mixtures
D 3142 Standard test method for specific gravity, API 2.13.2 (b)
gravity or density of cutback asphalts by hydrometer
method
D 4791 Standard Test Method for Flat Particles, Elongated Table 17.2
Particles, or Flat and Elongated Particles in
Coarse Aggregate
D 5821 Standard Test Method for Determining the Percentage Table 17.2
of Fractured Particles in Coarse Aggregate
T 176 Plastic fines in graded aggregates and Tables 2.1 & 2.2
soils by use of the sand equivalent test Table 17.2