Beruflich Dokumente
Kultur Dokumente
Characteristics Approvals
–– Monitoring of DC and AC currents from 3 mA to 15 A A UL 508, CAN/CSA C22.2 No.14
–– TRMS measuring principle
C GL (pending)
–– One device includes 3 measuring ranges
D GOST
–– Over- or undercurrent monitoring configurable
–– Hysteresis adjustable from 3-30 % K CB Scheme
–– Tripping delay TV adjustable 0; 0.1-30 s E CCC
–– 3 supply voltage versions
L RMRS
–– 2 c/o contacts
–– 22.5 mm (0.89 in) width
–– 3 LEDs for indication of operational states Marks
a CE
b C-Tick
Order data
Accessories
Type Description Order code
ADP.01 Adapter for screw mounting 1SVR 430 029 R0100
MAR.02 Marker label for devices with DIP switches 1SVR 430 043 R0000
COV.01 Sealable transparent cover 1SVR 430 005 R0100
Functions
Operating controls
Application
Depending on the configuration, the current monitoring relays CM-SRS.2 can be used for over- b or undercurrent
monitoring a in single-phase AC and/or DC systems. The devices work according to the open-circuit principle.
Operating mode
The CM-SRS.2 has 2 c/o contacts. There are 2 versions available, CM-SRS.21 with 3 measuring ranges: 3-30 mA,
10‑100 mA, 0,1-1 A and CM-SRS.22 with ranges: 0.3-1.5 A, 1-5 A, 3-15 A. The measuring range is selected by connecting
the monitored wire to the corresponding terminal B1/B2/B3-C.
The unit is adjusted with potentiometers and switches on the top of the unit. The selection of over- b or undercurrent
monitoring a is made with a DIP switch . Potentiometers, with direct reading scale, allow the adjustment of the threshold
value I, of the hysteresis % and of the tripping delay TV. The hysteresis % is adjustable within a range of 3 to 30 % of the
threshold value, and the tripping delay TV over a range of instantaneous to a 30 s delay.
A1-A2
Threshold
Hysteresis
Measured value TV < TV
11-14 (15-18)
11-12 (15-16)
21-24 (25-28)
21-22 (25-26)
A1-A2
11-14 (15-18)
11-12 (15-16)
21-24 (25-28)
21-22 (25-26)
2CDC 252 211 F0205
green LED
red LED
yellow LED
1 ON Undercurrent monitoring
OFF Overcurrent monitoring
2CDC 252 272 F0005
OFF = Default
Input circuit
Timing circuit
Delay time TV 0 or 0.1-30 s adjustable
Repeat accuracy (constant parameters) ±0.07 % of full scale
Tolerance of the adjusted delay time -
Accuracy within control supply voltage tolerance Δt ≤ 0.5 %
Accuracy within temperature range Δt ≤ 0.06 % / °C
Control supply voltage U/T: green LED V: control supply voltage applied
W: tripping delay TV active
Measured value U: red LED V: overcurrent
W: undercurrent
Relay status R: yellow LED V: relay energized
General data
CM-SRS.22
version 24-240 V AC/DC: 0.145 kg (0.320 lb)
version 110-130 V AC: 0.170 kg (0.375 lb)
version 220-240 V AC: 0.171 kg (0.377 lb)
gross weight CM-SRS.22
version 24-240 V AC/DC: 0.163 kg (0.359 lb)
version 110-130 V AC: 0.190 kg (0.419 lb)
version 220-240 V AC: 0.191 kg (0.421 lb)
CM-SRS.22
version 24-240 V AC/DC: 0.167 kg (0.368 lb)
version 110-130 V AC: 0.193 kg (0.425 lb)
version 220-240 V AC: 0.194 kg (0.428 lb)
Material of enclosure PA 6
Mounting DIN rail (IEC/EN 60715)
Mounting position any
Degree of protection enclosure IP50
terminals IP20
Wire size fine-strand with(out) wire end ferrule 2 x 0.75-2.5 mm² (2 x 18-14 AWG)
rigid 2 x 0.5-4 mm² (2 x 20-12 AWG)
Stripping length 7 mm (0.28 in)
Tightening torque 0.6-0.8 Nm (5.31-7.08 lb.in)
Environmental data
Isolation data
Standards
Electromagnetic compatibility
Interference immunity to IEC/EN 61000-6-2
electrostatic discharge IEC/EN 61000-4-2 Level 3
radiated, radio-frequency, electromagnetic field IEC/EN 61000-4-3 Level 3
electrical fast transient / burst IEC/EN 61000-4-4 Level 3
surge IEC/EN 61000-4-5 Level 3
conducted disturbances, induced by IEC/EN 61000-4-6 Level 3
radio-frequency fields
Interference emission IEC/EN 61000-6-3
high-frequency radiated IEC/CISPR 22, EN 55022 Class B
high-frequency conducted IEC/CISPR 22, EN 55022 Class B
V V
300 300
V 200 V 200
100 100
80 80
60 60
50 50
40 40
30
10 10
0.1 0.2 0.5 1 2 4 6 10 0.1 0.2 0.5 1 2 4 6 10
I A I A
1.0
Switching cycles
0.9
0.8
F
0.7 250 V
resistive load
0.6
2CDC 252 192 F0205
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
cos ϕ Switching current [A]
109.5 4.31‘‘
102 4.02‘‘ 22.5
0.886‘‘
3.07‘‘
78
CM-SRS.2
0.453”
11.5
0.256”
62.5 2.461”
6.5
0.394”
0.787”
10
20
60 2.362”
70 2.756”
4T22
8
18 0.709“
21 0.827“
7 0.275”
22.5
3.5 0.138”
0.886”
68.5 2.70”
front-to-back
size 107
Further documentation
Note:
We reserve the right to make technical changes
or modify the contents of this document without
prior notice. With regard to purchase orders, the
agreed particulars shall prevail. ABB AG does
not accept any responsibility whatsoever for
potential errors or possible lack of information in
this document.