0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
25 Ansichten1 Seite
1. This document provides the technical specifications for a chlorinated rubber high-build marine coating used as the base coat for anticorrosive paint.
2. The product meets various test standards including a solid content of 75%, drying time of less than 2 hours to surface dry and less than 20 hours to hard dry, and corrosion resistance passing a 240-hour salt spray test.
3. The coating is produced by mixing the listed ingredients together and adjusting the viscosity with additional components, then filtering and packaging the final product.
1. This document provides the technical specifications for a chlorinated rubber high-build marine coating used as the base coat for anticorrosive paint.
2. The product meets various test standards including a solid content of 75%, drying time of less than 2 hours to surface dry and less than 20 hours to hard dry, and corrosion resistance passing a 240-hour salt spray test.
3. The coating is produced by mixing the listed ingredients together and adjusting the viscosity with additional components, then filtering and packaging the final product.
1. This document provides the technical specifications for a chlorinated rubber high-build marine coating used as the base coat for anticorrosive paint.
2. The product meets various test standards including a solid content of 75%, drying time of less than 2 hours to surface dry and less than 20 hours to hard dry, and corrosion resistance passing a 240-hour salt spray test.
3. The coating is produced by mixing the listed ingredients together and adjusting the viscosity with additional components, then filtering and packaging the final product.
Chlorinated rubber high-build marine coating (Base Coat) Technical data
Product Primer Quantity Color Iron oxide red Product Standard: Marine paint for anticorrosive GB/T-6748-2008
Chlorinated rubber Test items Test index Test result
1 14 Solid content ≥50 75 resin Fineness ≤60 55 2 Petroleum resin 1.6 Surface dry≤4 Surface dry≤2 70°chlorinated Drying time 3 5 Production Procedure: hard dry≤24 hard dry≤20 paraffin Mix 1, 2, 3, 4 together and fully Impact resistance ≥50 50 4 Xylene 10 dissolve them in high-speed Flexibility (mm) ≤ 1 1 5 Dispersant 0.2 stirring, and then add 5, 6, 7, 8, 9, Adhesion (Circle)≤ 1 1 6 Organic bentonite 1 10, 11 in sequence, following by Salt water resistance(h) ≥ 96h 240h high-speed stirring for 30-40 Salt spray resistance The film does not wrinkle, fall 7 Anti-settling agent 1 240h minutes. Add 14 to adjust the (168h) off or rust 8 Zinc oxide 2 viscosity when grinding. While 9 Iron oxide red 16 fineness is below 60, add 12, 13
10 Talcum powder 35 with high-speed stirring for 20-30
minutes. Add 14 to adjust the Product Application: Used as the first coating on ships, or steel construction. It 11 Polyamide wax 0.3 viscosity, finished with filtering has excellent water and corrosion resistance with outstanding durability. 52°chlorinated and packaging at the end. 12 4 paraffin Surface Treatment: It is recommended to use sandblasting to clean any grease, 13 Epoxy resin 2.3 debris and moisture on surface by applying appropriate cleaning agent in order 14 Trimethylbenzene 7.6 to achieve the best performance from the paint. If surface is coated with salt compound, rinse and clean surface with a high pressure water gun thoroughly 15 Total 100 and wait for surface to dry completely before coating.