Beruflich Dokumente
Kultur Dokumente
Name of Work: Construction of First Floor Shopping Complex and Renavation of Bus Bays and
Shop Building Ground Floor at Dr.M.G.R Central Bus Stand in Division No: 24 , Zone-I, Salem
City Municipal Corporation
Estimate Amount: Rs. 590.00 Lakhs
DETAILED ESTIMATE
First Floor
For Bus Stand Shop Complex
Walls allaround 1 x 1 293.80 0.23 3.30 222.99
For Column 2 x 4 -0.23 0.23 3.30 -1.40
2 x 28 -0.23 0.23 3.30 -9.78
Cross Wall 1 x 7 18.41 0.23 3.30 97.81
Locker Room Wall 1 x 1 -29.36 0.23 3.30 -22.28
S Description Nos L B D Content Qty
No
Toilet Wall 1 x 1 6.41 0.23 3.30 4.87
1 x 1 4.25 0.23 3.30 3.23
1 x 2 3.09 0.11 2.15 1.46
1 x 2 1.22 0.11 2.15 0.58
Dining Wall 1 x 1 5.85 0.23 3.30 4.44
Open 1 x 1 -3.00 0.23 2.15 -1.48
Server Room 1 x 1 2.34 0.23 3.30 1.78
Stair Wall 1 x 1 4.24 0.23 3.30 3.22
Atm Wall 1 x 1 8.70 0.23 3.30 6.60
ATM Door 1 x 1 -3.00 0.23 2.15 -1.48
Cross Wall 1 x 1 3.00 0.23 3.30 2.28
Lift Wall 1 x 1 2.60 0.23 3.30 1.97
1 x 1 1.90 0.23 3.30 1.44
Lift Door 1 x 1 -1.00 0.23 3.30 -0.76
Toilet Block 1 x 1 4.25 0.23 3.30 3.23
1 x 1 5.39 0.23 3.30 4.09
1 x 3 2.52 0.11 2.15 1.79
1 x 2 1.22 0.11 2.15 0.58
D/F Door 1 x 3 -0.90 0.23 2.15 -1.34
D/F Door 2 x 2 -0.75 0.11 2.15 -0.71
Wall Allround OTS 1 x 1 19.94 0.23 0.90 4.13
Toilet Block 1 x 1 4.57 0.23 3.30 3.47
1 x 1 3.21 0.23 3.30 2.44
1 x 1 3.21 0.11 2.15 0.76
1 x 1 1.22 0.11 2.15 0.29
D/F Door 1 x 2 -0.90 0.23 2.15 -0.89
D/F Door 1 x 2 -0.75 0.11 2.15 -0.35
1 x 2 4.27 0.23 3.30 6.48
1 x 1 6.26 0.23 3.30 4.75
ATM Wall 1 x 1 4.23 0.23 3.30 3.21
1 x 1 3.20 0.23 3.30 2.43
1 x 1 2.60 0.23 3.30 1.97
D/F Door 1 x 1 -1.00 0.23 3.30 -0.76
1 x 1 -1.20 0.23 3.30 -0.91
1 x 2 -0.75 0.23 3.30 -1.14
Stair Wall 1 x 1 4.80 0.23 3.30 3.64
Toilet Block 1 x 1 7.52 0.23 3.30 5.71
1 x 2 4.88 0.23 3.30 7.41
1 x 1 3.53 0.23 3.30 2.68
1 x 2 3.53 0.11 2.15 1.67
D/F Door 1 x 3 -1.00 0.23 2.15 -1.48
D/F Door 2 x 2 -0.75 0.11 2.15 -0.71
S Description Nos L B D Content Qty
No
Sundries 22.07
Total 390.00 390.00 m2
Second Floor
For Bus Stand Shop Complex
Parapet Walls allaround 1 x 1 293.80 0.23 0.90 60.82
D/F Column 4 x 2 -0.23 0.23 0.90 -0.38
2 x 28 -0.23 0.23 0.90 -2.67
Wall Allround OTS 1 x 1 19.94 0.23 0.90 4.13
For Stair Case Room 6 x 2 4.80 0.23 2.10 27.82
6 x 2 4.80 0.23 0.15 1.99
6 x 2 6.30 0.23 3.00 52.16
6 x 2 6.30 0.23 2.70 46.95
D/F Door 1 x 6 -1.00 0.23 2.10 -2.90
Sundries 12.08
Total 200.00 200.00 m3
13 Providing Gravel filling including cost and conveyance of Gravel from
approved quarry to work site and stacking to departmental gauge for pre
measurement including labour for spreading complete
4 x 2 8.00
Total 8.00 8.00 Each
33 Supply & fixing in position of Indian make white glazed earthernware
lipped mouth porceliain flat back urinal with all accessories such as
32mm dia bell mouth PVC connection, 15mm dia GM wheel valve,
fixing the urinal to the wall in position with necessary TW plugs, clamps,
screws, shellac etc including dismantling brick masonry if necessary and
making good of the disturbed portion to original condition, fixing 15mm
GI pipe connection and wheel valve, painting the pipe with two coats of
approved paint over one coat of primer and check without any leakage
etc. complete complying with std. specifications and as directed by dept.
officers. (the Urinal should got approved by the Exe. Engineer before use
on works)
2 x 10 20.00
Sundries
Total 20.00 20.00 Each
46 Geological investigation charges preparation of geological survey report
etc., complete
1 x 1 1.00
Sundries
Total 1.00 1.00 Each
47 Drilling of 150mm Dia bore well in hard rack area in including labour
charges for drilling and development charges for erection of caching pipe
in over burden soils all cost and conveyance etc., complete
1 x 1 30.00 30.00
Sundries
Total 30.00 30.00 Rm
49 Supply and delivery of 10 HP Three phase Submersible Motor pumpset
as per IS 8034 with ISI tandard specification, the Duty Condition are 125
LPM x 225m head etc. complete including all cost and conveyanve etc.
complete
1 x 1 1.00
Sundries
Total 1.00 1.00 Each
50 Supply and Delivery of Three Phase Panel board Star Delta with Two
Level Guard and Auto Start upto 10 HP submersible motor pumpset as
per standard specification
1 x 1 1.00
Sundries
Total 1.00 1.00 Each
51 Supply and Fixing of the Following Pipes and Specials etc., Complete.
110mm Dia PVC Pipe 3 x 1 15.00 45.00
25 x 2 6.00 300.00
345.00 345.00 Rm
110mm Dia PVC Tee 1 x 25 25.00 25.00
3 x 2 6.00 6.00
S Description Nos L B D Content Qty
No
Name of Work: Construction of First Floor Shopping Complex and Renavation of Bus Bays and Shop
Building Ground Floor at Dr.M.G.R Central Bus Stand in Division No: 24 , Zone-I, Salem City Municipal
Corporation
Estimate Amount: Rs. 590.00 Lakhs
ABSTRACT OF ESTIMATE
Name of Work: Construction of First Floor Shopping Complex and Renavation of Bus Bays and Shop
Building Ground Floor at Dr.M.G.R Central Bus Stand in Division No: 24 , Zone-I, Salem City
Municipal Corporation
As per Instruction were given by the Commissioner and Exe. Engineer the Above Estimate was
Prepared and Submitted for the Following Provisions.
1 Dismatling the Existing Damaged Brick work in cement mortar including all cost and conveyance
2 etc.,complete
Dismatling the Existing Damaged One Course of Pressed Tile Roof finish in cement mortar including
all cost and conveyance etc.,complete
3 Dismatling the Existing Damaged AC Sheet Roof with out Roof Timbers including all cost and
conveyance etc.,complete
4 Dismatling the Existing Damaged Cement concrete including all cost and conveyance etc.,complete
5 Earth work excavation for foundation in ordinary soil, light black cotton sandy loam and dry silt
including shoring, strutting, baling or pumping out water wherever necessary and refilling the sides of
foundation with excavated earth in layers of 15cm thick and depositing the surplus earth at places as
directed by the departmental officers with initial lead and lift
6 Supplying and filling with approved quality of dry river sand to filling in foundation and basement and
filling the site in layers of not more than 15cm thick etc., complete. Complying with standard
specifications and drawings and has directed by departmental Engineers
7 Cement concrete of mix 1:4:8 (one cement – four sand – eight broken stone) using Hard broken granite
stone jelly of 40 mm gauge for foundation leveling course, standard specifications and drawings and
has directed by departmental Engineers. Including cost and conveyance of all materials to working site,
laying concrete and curing etc.
8 Supplying and erecting in the position of MS sheets including necessary supports for plane surfaces
using MS Sheets of size 90cm x 60cm and or suitable shifted with welded mild steel angles of size
25mm x 25mm x 3mm for boarding laid over silver oak (country wood) joints of size 10cm x 6.5cm,
complete complying with standard specification below Ground level.
10 Providing and laying reinforced cement concrete of mix 1:11.5:3 (one cement, one point five sand and
three metal) using machine crushed hard broken granite stone jelly 20mm ISS gauge for RCC works
but including curing etc. and including fixing fan clamps or hooks,. complete Complying with standard
specifications and drawings and has directed by departmental Engineers.
11 Plain cement concrete 1:2:4 mix (One cement two sand and four aggregate) using 20mm size ISS
gauge HBBG metal including mixing, laying, consolidating, curing, cost and conveyance of all
materials to site and all labour charges etc., complete as per standard specification
12 Brick work in cement mortar 1:5 (one cement five sand) using best quality country bricks including
cost and conveyance of all materials to working site in super sector curing etc. complete. Complying
with standard specifications and has directed by departmental Engineers. Including cost and
conveyance of all materials to working site etc.
13 Providing Gravel filling including cost and conveyance of Gravel from approved quarry to work site
and stacking to departmental gauge for pre measurement including labour for spreading complete
14 Supplying and fixing MS grill to doors windows and ventilators etc. using 20mm x 6mm as directed by
the departmental officers inclusive of cost of MS grill and labour charges including one coat of red
oxide and fixing in position etc. complete (as per schedule of rates) as per standard specification
15 Supplying & fixing door shutters for Medium Density Fiber Board of exterior grade 35mm thick,
single leaf conforming to IS:12406/1989 with 35x12 mm T.W.Lipping on all edges with necessary
adhesives and CP screws complying with standard specification. The rate is inclusive of three coats of
best quality varnish but including cost of furniture fittings. such as 125mm x 30mm Hinges 3 Nos,
300mm tower bolt 2nos, 200mm tower bolt I no. 300mm Aldrop 1 No. Alu handle ornamental type 2
16 Supplying, fabricating
Nos, and 1 No. and fixing
Door stopper in position
etc complete. of Alumi.Anod.natural
consider a door shutters ofcolour matt finish door with fully
size 1.2x2.1m
PLB board 12 mm thick using rectangular Alu.Box section of following sizes for frame and shutter
with necessary accessories such as Al. Clips, Best double action floor springs, Aluminium Handles on
both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power
consemption charges required for fabrication if necessary chipping, dismantling making necessary
holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent
required and made good to the original conditions after fixing etc.,complete. The Alumi. surface
must be anodised with matt finish under electrically controlled condition in accordance with IS
specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all
sections.All the materials should be got approved by the Engineer - In -charge before fixing as
directed.
17 Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section
using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is
inclusive of hood covers, transportation charges etc
18 Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)
from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with
GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick
of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the
shutter will be provided with Espag multi power point locks and also it operates as handle. The corners
and joints should be welded and cleaned. Radiations free pin headed plain or brown
colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even
at most ranging storms and should have key lockable action, security protective hinges, strong locking
systems and as per size for arresting noise and energy loss. The connecting mechanism
between sash and outer frame that enables opening of the window. The window should be fixed to the
wall with 100% packing with screws and silicon packing all round the frames.The window should be
got approved from the ExecutiveEngineer before use on work
19 Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the
profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mmboth profiles are
reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections
with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and
shutter.The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick
should be provided in the louvers. The window should be fixed to the wall with 100% packing with
screws and silicon packing all round the frames. The ventilator should be got approved from the
Executive Engineer before use on work
20 Plastering with cement mortar 1:3 mix, 20mm thick including cost and conveyance of all materials to
site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete .
complying with std. specifications
21 Special Ceiling Plastering for RCC slabs and beams with cement mortar 1:3 mix 10mm thick including
cost and conveyance of all materials to site, loading and unloading charges and labour charges for
mixing, laying and curing etc. complete . complying with std. specifications
22 Plastering with cement mortar 1:5 mix, 12mm thick including cost and conveyance of all materials to
site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete .
complying with std. specifications
23 Flooring with ceramic tiles of approved Colour and quality of size 305mm x 305mm x 6mm laid first
quality design of all colours in cement mortar 1:3 mix, 20mm thick and pointing with the same mortar
etc., completely and finish very neatly
24 Dadooing walls with Ceramic tiles of size 20cm x 20cm x 6mm first quality design tiles of all colours
laid in cement mortar 1:2 mix, 10mm thick and pointing with white cement using 0.40 kg/1m2
including finishing the joint and pointing flush with tile surface etc., complete
25 Paving the floor with best approved quality fine polished Rajesthan kotta stone slab of size 20mm with
machine cut edges of size below 2'0" x 2'0" laid over a cement mortar 1:3 mix, fixing the slab in true
tight angles with minimum possible width of joints and polishing the joints with cement mortar 1:3
mix and polishing with floor polisher to a high degree to finish and curing etc. complete as directed by
depat. officers.
26 Flooring with Eurocon grip tiles of size 30 x 30 x 1cm of approved colour and quality (Endura
industrial tiles) in cement mortar 1:3 mix and pointing with the same mortar etc. complete and finish
very neatly
27 Flooring with Vetrified flooring tiles of size 600 x 600 x 8mm of approved colour and quality of
required size laid in cement mortar 1:3 mix 20mm thick and pointing with the same mortar complete
and finish very neatly etc complete
28 Dadooing the walls with Vetrified tiles of size 600 x 600 x 8mm thick laid in cement mortar 1:2 mix
10mm thick and pointing with white cement using 0.40 kg./cm2 including finishing the joint and
pointing flush with tile surface etc.
29 Paving the floor with best approved quality fine polished Granite Slabstone slab of size 20mm with
machine cut edges of size below 2'0" x 2'0" laid over a cement mortar 1:3 mix, fixing the slab in true
tight angles with minimum possible width of joints and polishing the joints with cement mortar 1:3
mix and polishing with floor polisher to a high degree to finish and curing etc. complete as directed by
depat. officers.
30 Wall Finishing with Putty Powder Three Coats using Putty powder Water Primer Including all cost in
all Floors etc.,complete.
31 Supply and fixing in position of European water closet with 'S' (or) 'P' trap of approved color and
quality with dauble flapped rigid PVC sheet cover the CP brass hinges etc., complete complying with
standard specification including supply and fixing in position of 10litre capacity glazed porcelain low
level flushing tank on wall including 2 Nos of 15mm & brass nipple, 15mm dia PVC brass connection,
15mm dia GI wheel value, 15mm dia Nylon connection and giving necessary water supply connection
etc., complete complying with standard specification
32 Supplying and fixing in position best quality approved make white glazed earthen ware wash hand
basin size 550mm x 400mm with a pair of cast iron brackets including cost of 15mm Φ brass
chromium plated pillar tap, 32mm Φ C.P. waste, 32mm Φ PVC waste pipe with rubber plugs and
chain, 15mm Φ G.M. Wheel valve 15mm Φ brass nipple, 15mm Φ Nylon connections etc. Including
fixing the wash hand basin in the wall in position with a pair of C.I. Brackets with teak wood plugs and
screws and giving necessary water supply connection and painting the brackets with two coats of paint
over a priming coat of anticorrosive paint including testing for leakage etc. complete as per standard
specifications.
33 Supply & fixing in position of Indian make white glazed earthernware lipped mouth porceliain flat
back urinal with all accessories such as 32mm dia bell mouth PVC connection, 15mm dia GM wheel
valve, fixing the urinal to the wall in position with necessary TW plugs, clamps, screws, shellac etc
including dismantling brick masonry if necessary and making good of the disturbed portion to original
condition, fixing 15mm GI pipe connection and wheel valve, painting the pipe with two coats of
approved paint over one coat of primer and check without any leakage etc. complete complying with
std. specifications and as directed by dept. officers. (the Urinal should got approved by the Exe.
Engineer before use on works)
34 Weathering Course with broken brick jelly 20mm size pure slacked lime over R.C.C. roof slab the
preparation of 32:12.5 for required depth and slope etc. complete.
35 Finishing the top of roof with one course of machine pressed tiles 20 C.m x 20 C.m x 2 C.m size using
cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3
mix Cost of all materials and labour charges
36 Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathedCu. Conductor of 1100V grade in
suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with
3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire
connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for
PVC concealed light point / Fan point (For electronic regulator). (SD-23)
37 Supply and Fixing of 5A 3Pin and Combined flush type wall socket with 5A flush type switch
condealed in suitable MS Box in flush with wall and concealed with 3mm thick hylem sheet. (SD-135)
38 Supply and Fixing of 5A / 15A 3Pin and Combined flush type wall socket with 15A flush type switch
condealed in suitable MS Box in flush with wall and concealed with 3mm thick hylem sheet. (SD-135)
39 Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor
with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from
terminals to the fitting. (SD-88)
40 Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator
with 1meter down rod on the existing clamp. (SD-107)
41 Painting two coats with ready mixed plastic emulsion paint of 1st class quality and of approved color
over a priming coat including through scraping clean removal of dirt etc., complete and including
necessary plaster of paris putty wherever required
42 Fabricating, Supplying and fixing of Pre painted galvanised iron sheets with the following
specification, the materials should be of PPGL tile profile with a red colour or any other approved
design 0.47mm thick 24 guage having width 1050mm. The sheet should be GI base pre painted hot
dipped galvanised iron sheet and to be fixed with shelf tapping screws, plastic washer. The washer and
screws to be fixed by using minute power machine drilled without damaging the sheets paint coating to
be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be
terra cotta finish like malabar mangalore tiles frinish optional matt finish. The sheet to be fixed with
making suitable corrugated, cutting the sheet into the required size and making ornamental designs as
per the site condition and as directed by the departmental officers.
43 Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L
Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of900mm from finished
floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre
with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The
vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete.
The rate is inclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance,
electrical charges, etc.complete
44 Supply and laying of 31/2 x 25 sqmm pvc armoured LTUG Cable in a treanch to be excavated at a
depth of 0.75m putting 0.150 layer of sand and covering the cable completely (SD-204)
45 Supply and fixng of TNEB Moter Board suitable for 3 Phases 200A service connection made up of
suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4"
rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary
bolts and nuts supports and supply and fixing of 3 Nos 200A fuse units (500V) 1 No. Neutral link,
copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16 PVC
insulated copper wire with earth connection complete - SD 131
49 Supply and delivery of 10 HP Three phase Submersible Motor pumpset as per IS 8034 with ISI
tandard specification, the Duty Condition are 125 LPM x 225m head etc. complete including all cost
and conveyanve etc. complete
50 Supply and Delivery of Three Phase Panel board Star Delta with Two Level Guard and Auto Start upto
10 HP submersible motor pumpset as per standard specification
51 Supply and Fixing of the Following Pipes and Specials etc., Complete.
110mm Dia PVC Pipe
110mm Dia PVC Tee
110mm Dia PVC Elbow
32 mm G.I. Pipe
32 mm Coupling
32mm GI Elbow
32mm Gate valve
32mm GI Bend
32mm GI Union
32mm GI B Nipple 6"
32mm Dia Hex Nipple
1" Dia GI Pipe
1" Dia GI Elbow
1" Dia Union
1" Dia Gate Valve
1" x 3/4" GI Reducer
3/4" Dia GI Pipe
3/4" Dia GI Elbow
3/4" Dia GI Tee
3/4" Dia Union
3/4" Dia Gate Valve
3/4" x 1/2" GI Reducer
CP Tap
Angle Valve
50mm Dia GI Pipe 'B' Class
50mm Dia GI Coupling
50mm Dia GI Bend
50mm Dia GI Elbow
52 Supply and delivery Of 3 Core copper conductor Flat Cable (4Sq.mm) confirming to IS 694/1990
with ISI marking sutiable for Submersible Pumpset etc., Complete
53 Supply and delivery of 1000Liter Capacity HDPE tank as per IS 12701 / 1996 including loading,
unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe including
cutting, threading and fixingconnection works charges etc.,
This Estimate has been prepared as per Current Schedule of Rates Year-2017-2018