Beruflich Dokumente
Kultur Dokumente
RE 1
AD 2
IN 3
II. Two point out of control limit
Sum
X bar
Range
RANGE
0.35
0.3 ucl
0.25
0.2 USL lcl
0.15
0.1
0.05
0
Refer action plan displayed on each machine for the actions on point out of control limits
Q3/d/Patil/control chart
CONTROL CHART
Operation : Seaming Engineering Spec: 148~149 Part Name:
RE 1
AD 2
Sum
X bar
Range
RANGE
0.35
0.3 ucl
0.25
0.2 USL lcl
0.15
0.1
0.05
0
Refer action plan displayed on each machine for the actions on point out of control limits
1.If parameter is under conatinment,do not enter in the control chart & do 100 % checking (mention the same on control chart)
2.TS 16949 Non conformance during Nov'01 : All points out of control limits to have remarks of "reason" & "action taken"
Q3/d/Patil/control chart
CONTROL CHART Zone - 6
Operation : Lower bracket
Engineering Spec: 291.15~292.15 Part Name: YH Rake Jacket asm
welding
Characteristic: Lower bracket
Sample size/ Freq :3/4Hrs
distance
Time 7(I) 11.00 3.00 7.00 11.00 3.00 7.00 11.00 3.00 7.00 11.00 3.00 7.00 11.00 3.00 7.00 11.00 Indication of out of control limits
Date I. One point out of control limit
RE 1
AD 2
Sum
X bar
Range
RANGE
0.7
0.6 ucl
0.5
0.4 USL lcl
0.3
0.2
0.1
0
Refer action plan displayed on each machine for the actions on point out of control limits
1.If parameter is under conatinment,do not enter in the control chart & do 100 % checking (mention the same on control chart)
Q3/d/Patil/control chart
2.TS 16949 Non conformance during Nov'01 : All points out of control limits to have remarks of "reason" & "action taken"
Q3/d/Patil/control chart
CONTROL CHART Zone - 6
Operation : Lower bracket weldingEngineering Spec: 56.45 / 56.95 Part Name: YH STD Jacket asm
RE 1
AD 2
Sum
X bar
Range
RANGE
0.7
0.6 ucl
0.5 USL
0.4
lcl
0.3
0.2
0.1
0
Refer action plan displayed on each machine for the actions on point out of control limits
1.If parameter is under conatinment,do not enter in the control chart & do 100 % checking (mention the same on control chart)
2.TS 16949 Non conformance during Nov'01 : All points out of control limits to have remarks of "reason" & "action taken"
Q3/d/Patil/control chart
CONTROL CHART Zone - 6
Operation: IP bracket welding Engineering Spec: 171.5~172.5 Part Name: Upper jacket asm
Characteristic: Groove Distance Sample size/ Freq :3/4Hrs YH7 STD Column
Time 7(I) 11.00 3.00 7.00 11.00 3.00 7.00 11.00 3.00 7.00 11.00 3.00 7.00 11.00 3.00 7.00 11.00 Indication of out of control limits
Date I. One point out of control limit
RE 1
AD 2
Sum
X bar
Range
RANGE
0.7
0.6 USL ucl
0.5
0.4
lcl
0.3
0.2
0.1
0
Refer action plan displayed on each machine for the actions on point out of control limits
1.If parameter is under conatinment,do not enter in the control chart & do 100 % checking (mention the same on control chart)
2.TS 16949 Non conformance during Nov'01 : All points out of control limits to have remarks of "reason" & "action taken"
Q3/d/Patil/control chart