Beruflich Dokumente
Kultur Dokumente
Future Pipe Industries produces large diameter FRP pipe in sizes up to 158” (13 ft) in
diameter. Our Fiberstrong™ FRP pipe are the largest commercially produced pipe
system in the United States; no other FRP pipe manufacturer comes even close to the
large diameters produced by FPI.
Manufacture
Fiberstrong pipe are produced on our own state of art computer-controlled Continuous
filament winding machines that allow pipe of any transportable length to be produced.
Pipe produced with this process and equipment are consistently uniform in wall
thickness, composition and physical properties, insuring compliance with applicable
specifications that include AWWA C950, ATSM D 3517 and ASTM D3262. They are
available in sizes from 16” all the way through 158”; all in standard 40’ lengths (other
lengths are available). Pressure classes range from 250 to 100 psig depending on
diameter.
Applications
Fiberstrong large diameter FRP pipes find many uses in infrastructure projects such as:
Joints
For standard buried applications, pipe is provided with FRP Reka couplings featuring
two elastomeric rubber seals as shown below. These joints allow for angular
deflections ranging from 3.0 degrees up to 0.5 degree depending on pipe diameter.
They are easy to assemble and provide a water-tight joint under all normal operating
conditions for all diameters. Internal joint testers are available to eliminate the need for
expensive sectional pressure tests on large diameter pipelines.
Pipes can be provided with plain ends for butt-wrap joints. High axial strength
pipes can also be supplied for installations where restrained joints are required and
thrust blocks cannot be utilized as shown below.
Electrically inert
Because FRP pipe are non-metallic, they do not require any cathodic protection
systems nor are they affected by stray electrical currents and can be safely installed in
the vicinity of cathodically protected steel pipelines.
Fiberstrong FRP pipe have a minimum 50 year design life. Invariably FRP pipe provide
owners with the lowest life-cycle costs when compared to conventional large diameter
pipe such as steel or concrete pipe, due to its long life, and maintenance-free and
corrosion-free service.
Light weight
Fiberstrong FRP pipe are light weight and easy to handle. They weigh ¼th the weight of
steel pipe and 1/10th the weight of concrete pipe per foot. Most pipe sections can be
handled on-site with a small excavator or small crane. When used off-shore, it is
common to pre-assemble 3 x 40’ pipe sections as shown below to allow 120’ of pipe to
be installed underwater in one underwater operation, significantly reducing installing
costs.
Our large diameter product line is complete; including fittings such as elbows, tees,
reducers and flanges in pipe sizes and pressure classes produced.
Experience
The Future Pipe group is the undisputed global leader in very large diameter FRP pipe
production, with tens of thousands of feet of pipe from 100” to 158” installed in mostly
pressure service. Some of the world’s largest power plants rely on FPI’s FRP pipe for
their sea water intakes and cooling water requirements.
Complete pipe System Solutions
In Europe contact
Future Pipe Industries BV
J.C. Kellerlaan 3
7770 AG Hardenberg
The Netherdlands
Tel : (+31) 52-288-811
Fax: (+31) 52-288-441
e-mail : info@futurepipe.nl
www.futurepipe.com/usa