Beruflich Dokumente
Kultur Dokumente
F-PACK Code
Version
PM.8.004426.EN
A1
easy
www.wittur.com
EN
Lift Package Code: PM.8.004426.EN
F-PACK Date: 29.10.2018
Version: A1
Easy-Setup Page: 2
Danger
! Read these instructions carefully before starting any work on the “Lift package“.
! This brief guide covers only the most important steps for the first commissioning of the “Lift package”.
! Before starting up the drive, you must read all the safety information in the full operating manual of the motor/
inverter, which also contains operating and maintenance instructions for the drive components.
! Qualified personnel ! Only qualified personnel are authorised to perform any planning, installation or maintenance
work, and this must be done in accordance with the relevant instructions.
! Unexpected motor start ! During first commissioning, an unexpected rotation of the traction sheave can happen at
any time.
! Risk of electric shock ! Never work under voltage. Operation of the drive components with removed protective
covers or blank live parts is not allowed.
! Risk of residual voltage – consider discharge duration ! Inverters include DC-link capacitors, which remain
charged with fatal voltage after switching operation voltage off (minimum waiting time 15 Minutes).
1. Electrical installation
Wiring according to the operating instructions of the motor (WSG) and the inverter (WLD). Take care about a proper
connection of the protective conductor and an EMC- compliant installation.
91 92 93 95 50 53 55 20 37 12 32 33 13 27 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 1112
X57 - Input X55 - Encoder
Wittur Lift Drive WLD 302 MCO 361
X59 - Output X58
81 82 PE 96 97 98 99 20 29 18 1 2 3 4 5 6 7 8 1 2
Safety
K1 Chain
U V W PE K2
K10.1 K12
M K10
3~
K10.1 K10 K12 K1 K2
Brake Motor
Resistor WSG-xx N
Brake Relay Brake Brake
(max. 29 mA) Contactor Motor
C
an
ck ce
Ba l
OK
Info
On
Warn.
Alarm
3. Menu selection
000000000000bin 1(1)
Quick Menus
Press the button “Quick Menu“ and select “Q1 My Personal Menu“ with the
Q1 My Personal Menu
button “OK“.
Q2 Quick Setup
Q5 Changes Made
Q6 Loggings
00000000
The first menu item is the language selection, which can be adjusted if needed. OK
Info
On
Warn.
Quick Main Alarm
Status
Alarm Log
Menu Menu
5. Drive-Code eingeben
000000000000bin
Hand Auto
1(1)
Off Menu
My Personal C Q1Reset
an
Enter the dive-code from the motor rating plate in parameter 19-01 and confirm on c k
Ba Motor type
on
ce
19-01 l
it with “OK“.
63159024
Is the code accepted, the display remains
OK
Info
On
unchanged, otherwise the parameter is
set to “0”. Warn.
On
Warn.
Subject to changes without notice ! Änderungen vorbehalten !
Alarm
Info
On
Warn.
8. Optional – reset of the inverter Alarm000000000000bin 1(1)
Main Menu
Press the buttons “Status“, “Main Menu“ and “OK“ at the same time and switch Hand
0- Operation
Off /Auto
Display Reset
on the operating voltage simultaneously. Keep the buttons pressed until the on on
1- Load and Motor
cooling fan starts and the display shows “INITIALIZING”. After approximately 2- Brakes
2 minutes, the initialization is finished and the screen is displays what is shown 3- Reference / Ramps
in the picture next to the text.
Press the button “Status” and continue with step section 3. Quick Main Alarm
Status Log
Menu Menu
C
an
ck ce
Ba l
OK
Info
On
Warn.
Alarm
Contact:
www.wittur.com
info.wed@wittur.com
service.wed@wittur.com