Beruflich Dokumente
Kultur Dokumente
Page 1 of 90
Large Bore 8" - 16" 23.40 105.00 25.27 113.00
Large Bore 18" - 30" 57.20 85.00 61.78 91.00
NOTE:
INCLUSION EXCLUSION
1. Material handling/shaking-out, sorting & hauling of pipes & fittings 1. All kinds of testing.
from laydown area. 2. Stress relieving.
2. Layout and Marking. 3. Surface preparation & painting work.
3. Cutting, bevelling & grinding / end preparation. 4. Pipe wrapping and insulation works.
4. Joint fitting-up & tack welding in-place. 5. Repair of defective joint fit-ups.
5. All welded pipe fitting, I.e.; couplings, tees, flanges, etc. 6. Fabrication of pipe support.
6. Screwed end square cutting, grinding, threading & screwing(make-on) 7. Cleaning and preservation work.
joints in-place.
7. All screwed pipe fittings, I.e.; couplings, tees, flanges etc.
8. Preheating.
Page 2 of 90
MECHANICAL
PIPE SITE FABRICATION
DESCRIPTION SIZE PIPE SPOOL
RANGE
MECHANICAL SHOP JOBSITE
PIPING WORKS MH/LM MH/MT MH/LM MH/MT
STAINLESS STEEL PIPES PARAMETER REMARKS
Page 3 of 90
DUCTILE IRON PIPE SCH 80 (PUSH ON JT)
Large Bore 3" - 6" 3.60 155.00 3.89 167.00
Large Bore 8" - 12" 7.50 90.00 8.10 97.00
NOTE:
INCLUSION EXCLUSION
1. Material handling/shaking-out, sorting & hauling of pipes & fittings 1. All kinds of testing.
from laydown area. 2. Surface preparation & painting work.
2. Layout and Marking. 3. Pipe wrapping and insulation works.
3. Cutting, bevelling & grinding / end preparation. 4. Repair of defective joint fit-ups.
4. Joint fitting-up & tack welding in-place. 5. Fabrication of pipe support.
5. All welded pipe fitting, I.e.; couplings, tees, flanges, etc. 6. Cleaning and preservation work.
6. Screwed end square cutting, grinding, threading & screwing(make-on)
joints in-place.
7. All screwed pipe fittings, I.e.; couplings, tees, flanges etc.
MECHANICAL
PIPE A/G INSTALLATION
DESCRIPTION SIZE STRAIGHT RUN PIPE
RANGE
MECHANICAL SHOP JOBSITE
PIPING WORKS MH/LM MH/MT MH/LM MH/MT
CARBON STEEL PIPES PARAMETER REMARKS
Page 4 of 90
Small Bore 1/2" - 2" 2.60 650.00
Large Bore 2 1/2" - 6" 6.00 365.00
Large Bore 8" - 16" 15.60 195.00
Large Bore 18" - 30" 33.80 120.00
ALLOY STEEL PIPES (SCH 80 - SCH 100)
Small Bore 1/2" - 2" 3.50 630.00
Large Bore 2 1/2" - 6" 7.50 340.00
Large Bore 8" - 16" 21.60 170.00
Large Bore 18" - 30" 45.80 105.00
ALLOY STEEL PIPES (SCH 120 - SCH 160)
Small Bore 1/2" - 2" 4.60 620.00
Large Bore 2 1/2" - 6" 10.40 310.00
Large Bore 8" - 16" 29.90 130.00
Large Bore 18" - 30" 72.80 90.00
NOTE:
INCLUSION EXCLUSION
1. Material handling/shaking-out, sorting & hauling of pipes & fittings 1. All kinds of testing except hydrotest.
from laydown area. 2. Stress relieving.
2. Layout and Marking. 3. Surface preparation & painting work.
3. Cutting, bevelling & grinding / end preparation. 4. Insulation works.
4. Joint fitting-up & tack welding in-place. 5. Valve installation
5. All welded pipe fitting, I.e.; couplings, tees, flanges, etc. 6. Repair of defective joint fit-ups.
6. Screwed end square cutting, grinding, threading & screwing(make-on) 7. Fabrication of pipe support.
joints in-place. 8. Cleaning and preservation work.
7. All screwed pipe fittings, I.e.; couplings, tees, flanges etc. 9. In-line instrument installation.
8. Installation of miscellaneous pipe supports.
9. Preheating.
10. Scaffolding. 11. Hydrotesting.
Page 5 of 90
MECHANICAL
PIPE A/G INSTALLATION
DESCRIPTION SIZE STRAIGHT RUN PIPE
RANGE
MECHANICAL SHOP JOBSITE
PIPING WORKS MH/LM MH/MT MH/LM MH/MT
STAINLESS STEEL PIPES PARAMETER REMARKS
Page 6 of 90
NOTE:
INCLUSION EXCLUSION
1. Material handling/shaking-out, sorting & hauling of pipes & fittings 1. All kinds of testing except hydrotest.
from laydown area. 2. Surface preparation & painting work.
2. Layout and Marking. 3. Insulation works.
3. Cutting, bevelling & grinding / end preparation. 4. Valve installation
4. Joint fitting-up & tack welding in-place. 5. Repair of defective joint fit-ups.
5. All welded pipe fitting, I.e.; couplings, tees, flanges, etc. 6. Fabrication of pipe support.
6. Screwed end square cutting, grinding, threading & screwing(make-on) 7. Cleaning and preservation work.
joints in-place. 8. In-line instrument installation.
7. All screwed pipe fittings, I.e.; couplings, tees, flanges etc.
8. Installation of miscellaneous pipe supports.
9. Scaffolding.
10. Hydrotesting.
MECHANICAL
PIPE A/G INSTALLATION
DESCRIPTION SIZE PREFAB SPOOL
RANGE
MECHANICAL SHOP JOBSITE
PIPING WORKS MH/LM MH/MT MH/LM MH/MT
CARBON STEEL PIPES PARAMETER REMARKS
Page 7 of 90
Small Bore 1/2" - 2" 1.60 365.00
Large Bore 2 1/2" - 6" 3.30 210.00
Large Bore 8" - 16" 8.50 110.00
Large Bore 18" - 30" 16.40 85.00
ALLOY STEEL PIPES (SCH 80 - SCH 100)
Small Bore 1/2" - 2" 2.00 350.00
Large Bore 2 1/2" - 6" 4.20 180.00
Large Bore 8" - 16" 11.80 100.00
Large Bore 18" - 30" 25.00 80.00
ALLOY STEEL PIPES (SCH 120 - SCH 160)
Small Bore 1/2" - 2" 2.50 340.00
Large Bore 2 1/2" - 6" 5.60 170.00
Large Bore 8" - 16" 16.40 85.00
Large Bore 18" - 30" 40.00 75.00
NOTE:
INCLUSION EXCLUSION
1. Material handling/shaking-out, sorting & hauling of pipes & fittings 1. All kinds of testing except hydrotest.
from laydown area. 2. Stress relieving.
2. Layout and Marking. 3. Surface preparation & painting work.
3. Cutting, bevelling & grinding / end preparation. 4. Insulation works.
4. Joint fitting-up & tack welding in-place. 5. Valve installation
5. All welded pipe fitting, I.e.; couplings, tees, flanges, etc. 6. Repair of defective joint fit-ups.
6. Screwed end square cutting, grinding, threading & screwing(make-on) 7. Fabrication of pipe support.
joints in-place. 8. Cleaning and preservation work.
7. All screwed pipe fittings, I.e.; couplings, tees, flanges etc. 9. In-line instrument installation.
8. Installation of miscellaneous pipe supports.
9. Preheating.
10. Scaffolding. 11. Hydrotesting.
MECHANICAL
PIPE A/G INSTALLATION
DESCRIPTION SIZE PREFAB SPOOL
RANGE
MECHANICAL SHOP JOBSITE
PIPING WORKS MH/LM MH/MT MH/LM MH/MT
STAINLESS STEEL PIPES PARAMETER REMARKS
Page 8 of 90
STAINLESS STEEL PIPES (SCH 40S)
Small Bore 1/2" - 2" 1.50 350.00
Large Bore 2 1/2" - 6" 3.20 190.00
Large Bore 8" - 16" 8.10 105.00
Large Bore 18" - 30"
STAINLESS STEEL PIPES (SCH 80S)
Small Bore 1/2" - 2" 1.90 340.00
Large Bore 2 1/2" - 6" 4.00 175.00
Large Bore 8" - 16" 11.40 95.00
Large Bore 18" - 30"
NOTE:
INCLUSION EXCLUSION
1. Material handling/shaking-out, sorting & hauling of pipes & fittings 1. All kinds of testing except hydrotest.
from laydown area. 2. Surface preparation & painting work.
2. Layout and Marking. 3. Insulation works.
3. Cutting, bevelling & grinding / end preparation. 4. Valve installation
4. Joint fitting-up & tack welding in-place. 5. Repair of defective joint fit-ups.
5. All welded pipe fitting, I.e.; couplings, tees, flanges, etc. 6. Fabrication of pipe support.
6. Screwed end square cutting, grinding, threading & screwing(make-on) 7. Cleaning and preservation work.
joints in-place. 8. In-line instrument installation.
7. All screwed pipe fittings, I.e.; couplings, tees, flanges etc.
8. Installation of miscellaneous pipe supports.
9. Scaffolding.
Page 9 of 90
10. Hydrotesting.
MECHANICAL
PIPE U/G INSTALLATION
DESCRIPTION SIZE INSTALLATION
RANGE
MECHANICAL SHOP JOBSITE
PIPING WORKS MH/LM MH/MT MH/LM MH/MT
CARBON STEEL PIPES PARAMETER REMARKS
Page 10 of 90
Large Bore 8" - 16" 26.90 125.00
Large Bore 18" - 30" 65.80 85.00
NOTE:
INCLUSION EXCLUSION
1. Material handling/shaking-out, sorting & hauling of pipes & fittings 1. All kinds of testing except hydrotest.
from laydown area. 2. Stress relieving.
2. Layout and Marking. 3. Surface preparation & painting work.
3. Cutting, bevelling & grinding / end preparation. 4. Pipe wrapping & Insulation works.
4. Joint fitting-up & tack welding in-place. 5. Valve installation
5. All welded pipe fitting, I.e.; couplings, tees, flanges, etc. 6. Repair of defective joint fit-ups.
6. Screwed end square cutting, grinding, threading & screwing(make-on) 7. Excavation & backfilling works.
joints in-place. 8. Cleaning and preservation work.
7. All screwed pipe fittings, I.e.; couplings, tees, flanges etc. 9. In-line instrument installation.
8. Preheating.
9. Hydrotesting.
MECHANICAL
PIPE U/G INSTALLATION
DESCRIPTION SIZE INSTALLATION
RANGE
MECHANICAL SHOP JOBSITE
PIPING WORKS MH/LM MH/MT MH/LM MH/MT
STAINLESS STEEL PIPES PARAMETER REMARKS
Page 11 of 90
CS CEMENT LINED PIPES PARAMETER REMARKS
NOTE:
INCLUSION EXCLUSION
1. Material handling/shaking-out, sorting & hauling of pipes & fittings 1. All kinds of testing except hydrotest.
from laydown area. 2. Surface preparation & painting work.
2. Layout and Marking. 3. Pipe wrapping & insulation works.
3. Cutting, bevelling & grinding / end preparation. 4. Valve installation
4. Joint fitting-up & tack welding in-place. 5. Repair of defective joint fit-ups.
5. All welded pipe fitting, I.e.; couplings, tees, flanges, etc. 6. Excavation & backfilling works.
6. Screwed end square cutting, grinding, threading & screwing(make-on) 7. Cleaning and preservation work.
joints in-place. 8. In-line instrument installation.
7. All screwed pipe fittings, I.e.; couplings, tees, flanges etc.
8. Installation of miscellaneous pipe supports.
9. Hydrotesting.
MECHANICAL
PIPE FABRICATION/INSTALLATION
DESCRIPTION SIZE PROCESS PIPING
RANGE
MECHANICAL SHOP JOBSITE
PIPING WORKS MH/LM MH/MT MH/LM MH/MT
CARBON STEEL PIPES PARAMETER REMARKS
Page 12 of 90
Large Bore 8" - 16" 15.80 200.00
Large Bore 18" - 30" 30.60 120.00
NOTE:
INCLUSION EXCLUSION
1. Material handling/shaking-out, sorting & hauling of pipes & fittings 1. All kinds of testing except hydrotest.
from laydown area. 2. Stress relieving.
2. Layout and Marking. 3. Surface preparation & painting work.
3. Cutting, bevelling & grinding / end preparation. 4. Pipe wrapping & Insulation works.
4. Joint fitting-up & tack welding in-place. 5. Valve installation
5. All welded pipe fitting, I.e.; couplings, tees, flanges, etc. 6. Repair of defective joint fit-ups.
6. Screwed end square cutting, grinding, threading & screwing(make-on) 7. Excavation & backfilling works.
joints in-place. 8. Fabrication of pipe support.
7. All screwed pipe fittings, I.e.; couplings, tees, flanges etc. 9. Cleaning and preservation work.
Page 13 of 90
8. Installation of miscellaneous pipe supports. 10. In-line instrument installation.
9. Preheating.
10. Scaffolding. 11. Hydrotesting.
MECHANICAL
PIPE FABRICATION/INSTALLATION
DESCRIPTION SIZE PROCESS PIPING
RANGE
MECHANICAL SHOP JOBSITE
PIPING WORKS MH/LM MH/MT MH/LM MH/MT
STAINLESS STEEL PIPES PARAMETER REMARKS
Page 14 of 90
DUCTILE IRON PIPE SCH 80 (PUSH ON JT)
Large Bore 3" - 6" 6.00 260.00
Large Bore 8" - 12" 12.60 160.00
NOTE:
INCLUSION EXCLUSION
1. Material handling/shaking-out, sorting & hauling of pipes & fittings 1. All kinds of testing except hydrotest.
from laydown area. 2. Surface preparation & painting work.
2. Layout and Marking. 3. Pipe wrapping & insulation works.
3. Cutting, bevelling & grinding / end preparation. 4. Valve installation
4. Joint fitting-up & tack welding in-place. 5. Repair of defective joint fit-ups.
5. All welded pipe fitting, I.e.; couplings, tees, flanges, etc. 6. Excavation & backfilling works.
6. Screwed end square cutting, grinding, threading & screwing(make-on) 7. Fabrication of pipe support.
joints in-place. 8. Cleaning and preservation work.
7. All screwed pipe fittings, I.e.; couplings, tees, flanges etc. 9. In-line instrument installation.
8. Installation of miscellaneous pipe supports.
9. Scaffolding.
10. Hydrotesting.
MECHANICAL
PIPE
DESCRIPTION SIZE
RANGE
MECHANICAL PUSH-ON JOINT BITUMINUOUS JT
PIPING WORKS MH/LM MH/MT MH/LM MH/MT
CAST IRON PIPES PARAMETER REMARKS
Page 15 of 90
CAST IRON (EXTRA HEAVY WEIGHT)
Large Bore 2" - 6" 1.60 1.80
Large Bore 8" - 16" 4.00 4.50
Large Bore 18" - 30" 8.00 9.00
NOTE:
INCLUSION EXCLUSION
1. Material handling/shaking-out, sorting & hauling of pipes & fittings 1. All kinds of testing except hydrotest.
from laydown area. 2. Surface preparation & painting work.
2. Joint fitting-up in-place. 3. Pipe wrapping & insulation works.
3. All pipe fitting connection, I.e.: elbows, tees, flanges, etc. 4. Valve installation
4. Installation of miscellaneous pipe supports. 5. Repair of defective joint fit-ups.
5. Hydrotesting. 6. Excavation & backfilling works.
7. Fabrication of pipe support.
8. Cleaning and preservation work.
9. In-line instrument installation.
Page 16 of 90
MECHANICAL
PIPE
DESCRIPTION SIZE
RANGE
MECHANICAL ON SLEEPER ON TRENCH
PIPING WORKS MH/LM MH/MT MH/LM MH/MT
COPPER PIPES PARAMETER REMARKS
NOTE:
INCLUSION EXCLUSION
1. Material handling/shaking-out, sorting & hauling of pipes & fittings 1. All kinds of testing except hydrotest.
from laydown area. 2. Surface preparation & painting work.
2. Welded end cutting, bevelling & grinding / end preparation. 3. Pipe wrapping & insulation works.
3. Joint fitting-up in-place. 4. Valve installation
4. All pipe fitting connections, I.e.; elbows, tees, flanges, etc. 5. Repair of defective joint fit-ups.
Page 17 of 90
5. Installation of miscellaneous pipe supports.(for inside bldg. & process) 6. Excavation & backfilling works.
6. Scaffolding. 7. Fabrication of pipe support. (I.e., sleeper, trench, piperack, etc.)
7. Hydrotesting. 8. Cleaning and preservation work.
9. In-line instrument installation.
Page 18 of 90
MECHANICAL
PIPE
DESCRIPTION SIZE
RANGE
MECHANICAL ON SLEEPER ON TRENCH
PIPING WORKS MH/LM MH/MT MH/LM MH/MT
FIBER GLASS REINF. PLASTIC PIPES PARAMETER REMARKS
Page 19 of 90
NOTE:
INCLUSION EXCLUSION
1. Material handling/shaking-out, sorting & hauling of pipes & fittings 1. All kinds of testing except hydrotest.
from laydown area. 2. Surface preparation & painting work.
2. Welded end cutting, bevelling & grinding / end preparation. 3. Pipe wrapping & insulation works.
3. Joint fitting-up in-place. 4. Valve installation
4. All pipe fitting connections, I.e.; elbows, tees, flanges, etc. 5. Repair of defective joint fit-ups.
5. Installation of miscellaneous pipe supports.(for inside bldg. & process) 6. Excavation & backfilling works.
6. Scaffolding. 7. Fabrication of pipe support. (I.e., sleeper, trench, piperack, etc.)
7. Hydrotesting. 8. Cleaning and preservation work.
9. In-line instrument installation.
Page 20 of 90
MECHANICAL
PIPE
DESCRIPTION SIZE
RANGE
MECHANICAL ON PIPERACK INSIDE THE BUILDING
PIPING WORKS MH/LM MH/MT MH/LM MH/MT
COPPER PIPES PARAMETER REMARKS
NOTE:
INCLUSION EXCLUSION
1. Material handling/shaking-out, sorting & hauling of pipes & fittings 1. All kinds of testing except hydrotest.
from laydown area. 2. Surface preparation & painting work.
2. Welded end cutting, bevelling & grinding / end preparation. 3. Pipe wrapping & insulation works.
3. Joint fitting-up in-place. 4. Valve installation
4. All pipe fitting connections, I.e.; elbows, tees, flanges, etc. 5. Repair of defective joint fit-ups.
Page 21 of 90
5. Installation of miscellaneous pipe supports.(for inside bldg. & process) 6. Excavation & backfilling works.
6. Scaffolding. 7. Fabrication of pipe support. (I.e., sleeper, trench, piperack, etc.)
7. Hydrotesting. 8. Cleaning and preservation work.
9. In-line instrument installation.
Page 22 of 90
MECHANICAL
PIPE
DESCRIPTION SIZE
RANGE
MECHANICAL ON PIPERACK INSIDE THE BUILDING
PIPING WORKS MH/LM MH/MT MH/LM MH/MT
FIBER GLASS REINF. PLASTIC PIPES PARAMETER REMARKS
Page 23 of 90
NOTE:
INCLUSION EXCLUSION
1. Material handling/shaking-out, sorting & hauling of pipes & fittings 1. All kinds of testing except hydrotest.
from laydown area. 2. Surface preparation & painting work.
2. Welded end cutting, bevelling & grinding / end preparation. 3. Pipe wrapping & insulation works.
3. Joint fitting-up in-place. 4. Valve installation
4. All pipe fitting connections, I.e.; elbows, tees, flanges, etc. 5. Repair of defective joint fit-ups.
5. Installation of miscellaneous pipe supports.(for inside bldg. & process) 6. Excavation & backfilling works.
6. Scaffolding. 7. Fabrication of pipe support. (I.e., sleeper, trench, piperack, etc.)
7. Hydrotesting. 8. Cleaning and preservation work.
9. In-line instrument installation.
Page 24 of 90
MECHANICAL
PIPE
DESCRIPTION SIZE
RANGE
MECHANICAL AT PROCESS AREA
PIPING WORKS MH/LM MH/MT MH/LM MH/MT
COPPER PIPES PARAMETER REMARKS
NOTE:
INCLUSION EXCLUSION
1. Material handling/shaking-out, sorting & hauling of pipes & fittings 1. All kinds of testing except hydrotest.
from laydown area. 2. Surface preparation & painting work.
2. Welded end cutting, bevelling & grinding / end preparation. 3. Pipe wrapping & insulation works.
3. Joint fitting-up in-place. 4. Valve installation
4. All pipe fitting connections, I.e.; elbows, tees, flanges, etc. 5. Repair of defective joint fit-ups.
Page 25 of 90
5. Installation of miscellaneous pipe supports.(for inside bldg. & process) 6. Excavation & backfilling works.
6. Scaffolding. 7. Fabrication of pipe support. (I.e., sleeper, trench, piperack, etc.)
7. Hydrotesting. 8. Cleaning and preservation work.
9. In-line instrument installation.
Page 26 of 90
MECHANICAL
PIPE
DESCRIPTION SIZE
RANGE
MECHANICAL AT PROCESS AREA
PIPING WORKS MH/LM MH/MT MH/LM MH/MT
FIBER GLASS REINF. PLASTIC PIPES PARAMETER REMARKS
Page 27 of 90
NOTE:
INCLUSION EXCLUSION
1. Material handling/shaking-out, sorting & hauling of pipes & fittings 1. All kinds of testing except hydrotest.
from laydown area. 2. Surface preparation & painting work.
2. Welded end cutting, bevelling & grinding / end preparation. 3. Pipe wrapping & insulation works.
3. Joint fitting-up in-place. 4. Valve installation
4. All pipe fitting connections, I.e.; elbows, tees, flanges, etc. 5. Repair of defective joint fit-ups.
5. Installation of miscellaneous pipe supports.(for inside bldg. & process) 6. Excavation & backfilling works.
6. Scaffolding. 7. Fabrication of pipe support. (I.e., sleeper, trench, piperack, etc.)
7. Hydrotesting. 8. Cleaning and preservation work.
9. In-line instrument installation.
MECHANICAL
PIPE HYDROTESTING
DESCRIPTION SIZE
RANGE
MECHANICAL
PIPING WORKS MH/LM MH/MT MH/LM MH/MT
HYDROTESTING PARAMETER REMARKS
HYDROTESTING OF PIPELINE
Small Bore 1/2" - 2" 0.29
Large Bore 2 1/2" - 6" 0.30
Large Bore 8" - 16" 0.32
Large Bore 18" - 30" 0.38
Large Bore 32" - 36" 0.43
NOTE:
INCLUSION EXCLUSION
1. Setting up & dismantling of temporary waterlines, pumps/drivers & 1. Repair of defective welds.
blanks. 2. Repair of major leaks.
2. Pin-pointing and marking of leakspots.
3. Tightening only to loose bolts and screwed joints.
Page 28 of 90
MECHANICAL
PIPE
DESCRIPTION SIZE VALVE INSTALLATION
RANGE
MECHANICAL 150 # RATING 300 # RATING
PIPING WORKS MH/PC MH/MT MH/LM MH/MT
VALVE INSTALLATION PARAMETER REMARKS
NOTE:
INCLUSION EXCLUSION
1. Material handling. 1. Surface preparation & painting work.
2. Installation, setting/aligning. 2. Insulation works.
3. Joint fitting-up / bolting. 3. Wrapping works.
4. Repair of defective joint fit-ups.
Page 29 of 90
MECHANICAL
PIPE
DESCRIPTION SIZE SURFACE PREPARATION
RANGE
MECHANICAL TANKS PIPES STRUCTURES
PIPING WORKS MH/SM MH/SM MH/SM
SURFACE PREPARATION PARAMETER REMARKS
NOTE:
INCLUSION EXCLUSION
1. Checking and hauling from stockpile area. 1. Primer and Finish Painting.
2. Retrieving & sieving of blasted consumables for re-use. 2. Scaffolding
3. Checking & inspection of prepared surface.
4. Setting-up and clearing of blasted eqpt.,protective barriers & scaffs.
MECHANICAL
PIPE
DESCRIPTION SIZE PAINTING WORK
RANGE
MECHANICAL TANKS PIPES STRUCTURES
PIPING WORKS MH/SM MH/SM MH/SM
PAINTING WORK PARAMETER REMARKS
PAINTING WORKS
Manual (Brush) 0.194 0.194 0.194
Spray 0.100 0.120 0.130
NOTE:
INCLUSION EXCLUSION
1. Checking and hauling from stockpile area. 1. Surface preparation works.
2. Checking dry film thickness of applied coating. 2. Artistic and sign painting works.
3. Setting-up and clearing of blasted eqpt.,protective barriers & scaffs. 3. Scaffolding
Page 30 of 90
4. Painting equipment.
Page 31 of 90
MECHANICAL
PIPE COLD INSULATION
DESCRIPTION SIZE
RANGE
MECHANICAL 25mm ~ 50mm 80mm ~ 100mm
PIPING WORKS MH/LM MH/LM
MECHANICAL INSULATION WORKS PARAMETER REMARKS
NOTE:
Include valve insulation works if insulation of valve correspond to a very small labor portion of total piping insulation manhours.
Include elbow cladding if elbow cladding correspond to a very small labor portion of total pipe cladding manhours.
INCLUSION EXCLUSION
1. Material uncrating, sorting, checking & hauling from storage area. 1. Surface preparation, painting works.
2. Fitting-up & placing of mesh wires or wire lath to anchor studs.
3. Batching and mixing of castable mat'ls.
4. Setting-up and clearing of metal forming machines.
5. Site fabricating of claddding sheets into pre-formed sections.
6. Setting-up and clearing of scaffolds.
MECHANICAL
PIPE COLD INSULATION
DESCRIPTION SIZE
RANGE
MECHANICAL 25mm ~ 50mm 80mm ~ 100mm
PIPING WORKS MH/EA MH/EA
MECHANICAL INSULATION WORKS PARAMETER REMARKS
VALVE INSULATION WITH CLADDING
SCREWED OR WELDED CONNECTION
Small Bore 1/2" - 2" 6.00 8.00
Large Bore 2 1/2" - 6" 10.00 12.00
Large Bore 8" - 16" 16.00 21.00
Page 32 of 90
NOTE:
INCLUSION EXCLUSION
1. Material uncrating, sorting, checking & hauling from storage area. 1. Surface preparation, painting works.
2. Fitting-up & placing of mesh wires or wire lath to anchor studs. 2. Anchor studs.
3. Batching and mixing of castable mat'ls. 3. Valve box.
4. Setting-up and clearing of scaffolds.
Page 33 of 90
MECHANICAL
PIPE COLD INSULATION
DESCRIPTION SIZE
RANGE
MECHANICAL 25mm ~ 50mm 80mm ~ 100mm
PIPING WORKS MH/EA MH/EA
MECHANICAL INSULATION WORKS PARAMETER REMARKS
VALVE INSULATION WITH CLADDING
FLANGED CONNECTION
Small Bore 1/2" - 2" 12.00 15.00
Large Bore 2 1/2" - 6" 18.00 22.00
Large Bore 8" - 16" 30.00 40.00
Large Bore 18" - 30" 60.00 50.00
Large Bore 32" - 36" 90.00 120.00
NOTE:
INCLUSION EXCLUSION
1. Material uncrating, sorting, checking & hauling from storage area. 1. Surface preparation, painting works.
2. Fitting-up & placing of mesh wires or wire lath to anchor studs. 2. Anchor studs.
3. Batching and mixing of castable mat'ls. 3. Valve box.
4. Setting-up and clearing of scaffolds.
MECHANICAL
PIPE COLD INSULATION
DESCRIPTION SIZE
RANGE
MECHANICAL 25mm ~ 50mm 80mm ~ 100mm
PIPING WORKS MH/SM MH/SM
MECHANICAL INSULATION WORKS PARAMETER REMARKS
EQUIPMENT INSULATION WITH
CLADDING
Vertical Vessel/Stack 7.50 9.00
Horizontal Vessel 6.00 8.00
Heat Exchanger 8.00 9.50
Tank 5.50 7.50
Pump 8.50 10.00
NOTE:
Page 34 of 90
INCLUSION EXCLUSION
1. Material uncrating, sorting, checking & hauling from storage area. 1. Surface preparation, painting works.
2. Fitting-up & placing of mesh wires or wire lath to anchor studs. 2. Anchor studs.
3. Batching and mixing of castable mat'ls.
4. Setting-up and clearing of scaffolds.
Page 35 of 90
MECHANICAL
PIPE HOT INSULATION
DESCRIPTION SIZE
RANGE
MECHANICAL 25mm ~ 50mm 80mm ~ 100mm
PIPING WORKS MH/LM MH/LM
MECHANICAL INSULATION WORKS PARAMETER REMARKS
NOTE:
Include valve insulation works if insulation of valve correspond to a very small labor portion of total piping insulation manhours.
Include elbow cladding if elbow cladding correspond to a very small labor portion of total pipe cladding manhours.
INCLUSION EXCLUSION
1. Material uncrating, sorting, checking & hauling from storage area. 1. Surface preparation, painting works.
2. Fitting-up & placing of mesh wires or wire lath to anchor studs.
3. Batching and mixing of castable mat'ls.
4. Setting-up and clearing of metal forming machines.
5. Site fabricating of claddding sheets into pre-formed sections.
6. Setting-up and clearing of scaffolds.
MECHANICAL
PIPE HOT INSULATION
DESCRIPTION SIZE
RANGE
MECHANICAL 25mm ~ 50mm 80mm ~ 100mm
PIPING WORKS MH/EA MH/EA
MECHANICAL INSULATION WORKS PARAMETER REMARKS
VALVE INSULATION WITH CLADDING
SCREWED OR WELDED CONNECTION
Small Bore 1/2" - 2" 5.00 7.00
Large Bore 2 1/2" - 6" 8.00 11.00
Large Bore 8" - 16" 13.00 19.00
Page 36 of 90
NOTE:
INCLUSION EXCLUSION
1. Material uncrating, sorting, checking & hauling from storage area. 1. Surface preparation, painting works.
2. Fitting-up & placing of mesh wires or wire lath to anchor studs. 2. Anchor studs.
3. Batching and mixing of castable mat'ls. 3. Valve box.
4. Setting-up and clearing of scaffolds.
Page 37 of 90
MECHANICAL
PIPE HOT INSULATION
DESCRIPTION SIZE
RANGE
MECHANICAL 25mm ~ 50mm 80mm ~ 100mm
PIPING WORKS MH/EA MH/EA
MECHANICAL INSULATION WORKS PARAMETER REMARKS
VALVE INSULATION WITH CLADDING
FLANGED CONNECTION
Small Bore 1/2" - 2" 8.00 10.00
Large Bore 2 1/2" - 6" 12.00 15.00
Large Bore 8" - 16" 20.00 25.00
Large Bore 18" - 30" 45.00 56.00
Large Bore 32" - 36" 65.00 80.00
NOTE:
INCLUSION EXCLUSION
1. Material uncrating, sorting, checking & hauling from storage area. 1. Surface preparation, painting works.
2. Fitting-up & placing of mesh wires or wire lath to anchor studs. 2. Anchor studs.
3. Batching and mixing of castable mat'ls. 3. Valve box.
4. Setting-up and clearing of scaffolds.
MECHANICAL
PIPE HOT INSULATION
DESCRIPTION SIZE
RANGE
MECHANICAL 25mm ~ 50mm 80mm ~ 100mm
PIPING WORKS MH/SM MH/SM
MECHANICAL INSULATION WORKS PARAMETER REMARKS
EQUIPMENT INSULATION WITH
CLADDING
Vertical Vessel/Stack 6.00 8.00
Horizontal Vessel 5.00 7.50
Heat Exchanger 5.50 8.00
Tank 4.50 6.50
Pump 7.50 9.00
NOTE:
Page 38 of 90
INCLUSION EXCLUSION
1. Material uncrating, sorting, checking & hauling from storage area. 1. Surface preparation, painting works.
2. Fitting-up & placing of mesh wires or wire lath to anchor studs. 2. Anchor studs.
3. Batching and mixing of castable mat'ls.
4. Setting-up and clearing of scaffolds.
Page 39 of 90
MECHANICAL
NOTE:INCLUSION EXCLUSION
1. Receiving, off-loading, handling, hauling and installing fixing 1. Scaffolding, piping and power wiring,
and testing of units. support installation.
MECHANICAL
Page 40 of 90
Water Closet Partition MH/EA 12.00
Urinal Partition MH/EA 12.00
Floor Drain up to 4" dia. MH/EA 12.00
Floor/Wall Cleanout up to 4" dia. MH/EA 8.00
Grease Trap, Single C.I. MH/EA 5.00
Kitchen Gas Range MH/EA 4.00
Kitchen Sink, Single MH/EA 8.00
Kitchen Sink, Double MH/EA 12.00
Laundry Tubs MH/EA 6.00
Slop Sink MH/EA 8.00
Emergency Shower And Eyewash Fountain MH/EA 6.00
Hand Dryer MH/EA 1.00
Soap Dispenser MH/EA 2.00
Soap Holder MH/EA 2.00
Bidet MH/EA 12.00
INCLUSION
1. Receiving, off-loading, handling, uncrating, handling, hauling and installing fixing EXCLUSION
of items, including rough-ins. 1. Scaffolding, piping and power wiring.
Page 41 of 90
MECHANICAL
NOTE:
Manhours are based on receiving package type units delivered to jobsite and include off-loading from carrier, moving within 50 feet of final location
site, uncrating, setting, aligning, starting, checking, grouting and installation of box-in type anchor bolts.
Manhours do not include installation of water supply and return piping, instruments within the water piping, or electrical power wiring.
MECHANICAL
Page 42 of 90
Capacity 20 ~ 50 Tons MH/EA 55.00
Capacity 60 ~ 100 Tons MH/EA 96.00
Capacity 200 ~ 400 Tons MH/EA 330.00
Capacity 600 ~ 800 Tons MH/EA 630.00
Capacity 840 ~ 1000 Tons MH/EA 780.00
NOTE:
Manhours are based on receiving prefabricated units, knocked down and delivered to jobsite and include off-loading from carrier, moving within 50 feet
of final location site, field assembling, erecting, aligning, and anchoring at ground elevation.
Manhours do not include installation of catch basin, supporting steel, grillage, water treatment system, condenser water piping, motor starters
or power wiring.
Page 43 of 90
MECHANICAL
HEAT PUMPS
Capacity 0.75 ~ 1.0 Tons MH/EA 10.00
NOTE:
Manhours include job handling, hauling, rigging, setting, aligning of pump and motor including grouting, aand installation of box-in type anchor bolts.
Manhours do not include installation of piping, instrumentation and electrical motor starter and hook-up.
MECHANICAL
Page 44 of 90
Capacity 2,500 CFM MH/EA 18.00
Capacity 6,000 CFM MH/EA 20.00
Capacity 14,000 CFM MH/EA 22.00
Capacity 24,000 CFM MH/EA 40.00
Capacity 30,000 CFM MH/EA 50.00
NOTE:
Manhours include receiving at jobsite, off-loading from carrier, moving within 50 feet of final location site, uncrating, setting and aligning.
Manhours do not include installation of ductwork, water or steam piping, motor starters or power wiring, and scaffolding.
Page 45 of 90
MECHANICAL
NOTE:
Manhours include receiving at jobsite, off-loading from carrier, moving within 50 feet of final location site, uncrating, setting and aligning inside
of buliding at grade.
Manhours do not include installation of ductwork, water or steam piping, motor starters or power wiring.
MECHANICAL
Page 46 of 90
Output 50 ~ 150 MBH MH/EA 36.00
Output 200 ~ 500 MBH MH/EA 70.00
Output 600 ~ 1,500 MBH MH/EA 115.00
Output 1,600 ~ 3,000 MBH MH/EA 160.00
Output 7,000 MBH MH/EA 400.00
NOTE:
Manhours include receiving at jobsite, off-loading from carrier, moving within 50 feet of final location, skidding, rolling, jacking, setting, aligning on
pre-installed foundation, boilout, startup, final adjustment and testing, grouting and installation of box-in type anchor bolts.
Manhours do not include installation of gas, steam, water, or other piping, or installation of motor starter and power wiring.
Page 47 of 90
MECHANICAL
NOTE:
Manhours include receiving at jobsite, off-loading from carrier, moving within 50 feet of final location, rigging, picking, setting and aligning.
Manhours do not include fabrication of tank, steam, condensate, or water piping, insulation, or instrumentation, and civil works.
MECHANICAL
Page 48 of 90
PACKAGE/SPLIT TYPE AIR CONDITIONER UNITS
Capacity 3.00 ~ 3.75 Tons MH/EA 20.00
Capacity 10 ~ 15 Tons MH/EA 40.00
Capacity 20 ~ 30 Tons MH/EA 60.00
Capacity 40 ~ 50 Tons MH/EA 80.00
NOTE:
Manhours include off-loading from carrier, moving within 50 feet of final location site, uncrating, setting and aligning of unit on a
preinstalled concrete slab along the exterior structure wall and suspending the air handler from the ceiling up to 15 feet high.
Manhours do not include installation of concrete slab, connecting piping, refrigerant charge, or scaffolding.
Page 49 of 90
MECHANICAL
NOTE:
Manhours include receiving and off-loading at jobsite, rigging, pickling, setting and aligning.
Manhours do not include cutting openings in roof, placement of curb caps and flashing, or electrical power hook-up and scaffolding.
Page 50 of 90
MECHANICAL
Page 51 of 90
AIRFOIL CENTRIFUGAL FAN (Belt Drive)
12,420 ~ 40,980 CFM MH/EA 15.00
60,920 ~ 90,160 CFM MH/EA 30.00
110,300 ~ 134,960 CFM MH/EA 50.00
NOTE:
Manhours include receiving and off-loading at jobsite, moving within 50 feet of final location, rigging, pickling, setting and aligning
in an existing opening and adjustment.
Manhours do not include preparations of openings, installation of inlet vane control, out dampers, motor and drives, or electrical power hook-up.
Page 52 of 90
MECHANICAL
VOULUME DAMPERS
6" to 18" MH/EA 0.18
10" to 14" MH/EA 0.21
16" to 20" MH/EA 0.25
24" to 30" MH/EA 0.29
38" MH/EA 0.33
CEILING GRILLS
6" x 4" through 10" x 10" MH/EA 0.84
12" x 4" through 12" x 12" MH/EA 0.96
14" x 6" through 14" x 14" MH/EA 1.08
Page 53 of 90
48" x 24" through 48" x 36" MH/EA 0.78
NOTE:
Manhours include handling, hoisting into place, setting, aligning into position and make-up of connections for diffusers and above type accessories.
Page 54 of 90
MECHANICAL
NOTE:
Manhours include handling,rigging, hoisting into position, aligning and fastening into place including installation of duct fittings.
Manhours do not include fabrication works, insulation, fixing of supports and testing.
MECHANICAL
Page 55 of 90
SOUND ATTENUATORS
Air Flow Ca1,700 L/S MH/EA 12.00
Air Flow Ca20,500 L/S MH/EA 16.00
Air Flow Ca21,500 L/S MH/EA 18.00
NOTE:
Manhours include handling, hoisting into place, setting and aligning into position and make-up of connections for the above type accessories.
Page 56 of 90
MECHANICAL
NOTE:
Manhours include all operations to balance and test the systems in accordance with procedures which, in most cases
have been adapted from the Associated Air Balance Council.
Manhours include checking all terminals for tightness, testing for cycle in all positions, and making necessary adjustments.
Page 57 of 90
MECHANICAL
Page 58 of 90
ELECTROSTATIC PRECIPITATOR MH/MT 110.00
SMALL COMPRESSOR MH/MT 58.00
BLOWER AND DRIVER MH/MT 50.00
DRYER MH/MT 31.00
SILENCER MH/MT 42.00
AGITATOR AND MIXER MH/MT 110.00
BOILER STEEL STRUCTURE ERECTION
BOILER STEEL STRUCTURES MH/MT 40.00
HIGH TENSION BOLTS FOR BOILER STRUCTURE MH/MT 90.00
GRATING FOR BOILER STRUCTURE MH/MT 60.00
HANDRAIL FOR BOILER STRUCTURE MH/MT 65.00
SUPPORT FOR COAL BUNKER MH/MT 50.00
HIGH TENSION BOLTS FOR COAL BUNKER MH/MT 90.00
GRATING FOR BOILER COAL BUNKER MH/MT 60.00
HANDRAIL FOR COAL BUNKER MH/MT 65.00
PLATFORM & LADDER MH/MT 60.00
MECHANICAL
BOILER PIPINGS
MAIN STREAM PIPE MH/MT 75.00
REHEAT STEAM PIPE MH/MT 95.00
HP / LP BYPASS STAEM PIPE MH/MT 95.00
HP FEEDWATER PIPE MH/MT 110.00
MILLING PLANT
COAL GATE MH/MT 60.00
COAL FEEDER MH/MT 60.00
COAL CHUTES MH/MT 90.00
COAL MILLS MH/MT 99.00
MILL OUTLET VALVES MH/MT 70.00
MILL AROUND PIPING & VALVE MH/MT 120.00
PULVERIZED COAL PIPE MH/MT 120.00
SPRAGE HOPPER MH/MT 90.00
Page 59 of 90
CONDENSER CLEANING SYSTEM MH/MT 45.00
DEAERATOR MH/MT 35.00
LP HEATER MH/MT 30.00
ELECTRICAL PROTECTION UNIT MH/MT 100.00
VACUUM PUMP MH/MT 60.00
GLAND CONDENSER AND FAN MH/MT 90.00
CONDENSATE TRANSFER FAN MH/MT 60.00
CONDENSATE WATER FAN MH/MT 60.00
BOILER FEED WATER PUMP MH/MT 45.00
HEATER DRAIN RECOVERY PUMP MH/MT 80.00
ESP PIT PUMP MH/MT 80.00
BEARING COOLING WATER PUMP MH/MT 60.00
SEA WATER BOOSTER PUMP MH/MT 60.00
SEA WATER PIT PUMP MH/MT 80.00
BFP SOUND INSULATION COVER MH/MT 120.00
CHEMICAL DOSING EQUIPMENT MH/MT 60.00
OVERHEAD CRANE FOR T/G HOUSE MH/MT 60.00
HEATER DRAIN TANK MH/MT 60.00
CONDENSATE STORAGE TANK MH/MT 75.00
N2 SEAL SYSTEM MH/MT 60.00
VACCUM PURGE UNIT MH/MT 100.00
CIRCULATING WATER PIPE MH/MT 120.00
N2 GAS GENERATING SYSTEM MH/MT 120.00
EMERGENCY D/G MH/MT 60.00
COOLING WATER CHILLER MH/MT 45.00
INSTRUMENT AIR COMPRESSOR MH/MT 60.00
SERVICE AIR COMPRESSOR MH/MT 60.00
CHLORINATION INJECTION MH/MT 60.00
LIGHT OIL PIPING MH/MT 210.00
LIGHT OIL PUMP MH/MT 80.00
LIGHT OIL IGNITION PUMP MH/MT 80.00
LIGHT OIL STRAINER MH/MT 80.00
CIRCULATING WATER PUMP MH/MT 45.00
INTAKE EQUIPMENT MH/MT 50.00
SCREEN CLEANING SYSTEM MH/MT 80.00
MECHANICAL
Page 60 of 90
CATHODIC PROTECTION FOR INTAKE MH/MT 240.00
CATHODIC PROTECTION UNIT MH/MT 240.00
CATHODIC PROTECTION FOR DEMI TANK & CW MH/MT 240.00
CIRCULATING WATER PIPE MH/MT 120.00
STACK FOR ELEVATOR MH/MT 75.00
MACHINE SHOP MH/MT 60.00
FIRE FIGHTING SYSTEM MH/MT 200.00
FIRE PUMP MH/MT 80.00
LIGHT OIL UNLOADING EQUIPMENT MH/MT 60.00
Page 61 of 90
RAW WATER SUPPLY PUMP MH/MT 80.00
RAW WATER PUMP MH/MT 80.00
DEMI. WATER PUMP MH/MT 80.00
AUXILLIARY EQUIPMENT MH/MT 65.00
OVERHEAD CRANE MH/MT 60.00
MECHANICAL
FURNACES
BURNER WIND BOX MH/MT 90.00
OIL FIRING EQUIPMENT (IGNITORS) MH/MT 90.00
MECHANICAL
Page 62 of 90
TURBINE GENERATOR
HP TURBINE MH/MT 80.00
LP TURBINE MH/MT 80.00
CONTROL AND TURBINE ATTACHMENT MH/MT 60.00
TOOL MH/MT 80.00
OIL COOLER MH/MT 40.00
GENERATOR MH/MT 30.00
ACCESSORY MOTOR MH/MT 40.00
TRANSFORMER MH/MT 25.00
MAIN STEAM PIPE MH/MT 100.00
HP FEEDWATER PIPE MH/MT 147.00
FEEDWATER PIPE MH/MT 147.00
CONDENSATE WATER PIPE MH/MT 200.00
HOUSE WATER PIPE MH/MT 300.00
REHEAT STEAM PIPE MH/MT 94.00
ENGINE GENERATOR MH/MT 45.00
STEAM TURBINE MH/MT 70.00
Page 63 of 90
MECHANICAL
CONVEYORS BELTINGS
12" ~ 16" 2PLY MH/LM 0.40
18" ~ 24" 2PLY MH/LM 0.50
30" ~ 42" 2PLY MH/LM 0.60
48" 2PLY MH/LM 0.70
NOTE:
INCLUSION:
1. Material uncrating, sorting, checking, cleaning and hauling from laydown area.
2. Setting up, mounting, greasing and aligning of bearings and take-up units to pulley and drum shaft.
3. Conveyor belt laying, pulling, assembling, aligning & levelling of speed reducers w/ indirect drives or motors.
4. Setting & assembly of drive pulleys & chain sprocket to shafts of motor & fitting-up & tensioning of drive belts & chains & placing rive guards & idlers.
Page 64 of 90
EXCLUSION:
1. Any repairs as may required to rehabilitate damaged hardwares.
2. Conveyor belt splicing and vulcanizaing works.
3. Footings, foundations, steel structurals, carpentry, tinsmithry and electrical works.
4. Mechanical Tests and Machining works.
Page 65 of 90
DESCRIPTION
REMARKS
DESCRIPTION
REMARKS
Page 66 of 90
ding, piping and power wiring.
Page 67 of 90
DESCRIPTION
REMARKS
LED CONDENSERS
ED CONDENSERS
DESCRIPTION
REMARKS
Page 68 of 90
include off-loading from carrier, moving within 50 feet
Page 69 of 90
DESCRIPTION
REMARKS
DESCRIPTION
REMARKS
REMARKS
Page 70 of 90
ocation site, uncrating, setting and aligning.
Page 71 of 90
DESCRIPTION
REMARKS
DESCRIPTION
REMARKS
Page 72 of 90
ocation, skidding, rolling, jacking, setting, aligning on
of box-in type anchor bolts.
Page 73 of 90
DESCRIPTION
REMARKS
REMARKS
DESCRIPTION
REMARKS
Page 74 of 90
ng, setting and aligning of unit on a
the ceiling up to 15 feet high.
Page 75 of 90
DESCRIPTION
REMARKS
Page 76 of 90
DESCRIPTION
REMARKS
Page 77 of 90
igging, pickling, setting and aligning
Page 78 of 90
DESCRIPTION
REMARKS
Page 79 of 90
REMARKS
Page 80 of 90
DESCRIPTION
REMARKS
DESCRIPTION
REMARKS
Page 81 of 90
of connections for the above type accessories.
Page 82 of 90
DESCRIPTION
REMARKS
Page 83 of 90
DESCRIPTION
REMARKS
Page 84 of 90
DESCRIPTION
REMARKS
Page 85 of 90
DESCRIPTION
REMARKS
Page 86 of 90
Page 87 of 90
DESCRIPTION
REMARKS
DESCRIPTION
REMARKS
Page 88 of 90
Page 89 of 90
DESCRIPTION
REMARKS
t drives or motors.
oning of drive belts & chains & placing rive guards & idlers.
Page 90 of 90