Beruflich Dokumente
Kultur Dokumente
5
Item Description
Steel Savings Potential to reduce steel reinforcement by up to 20% compared to Grade 500 steel
Manpower - Steel fixing / Up to 20% less workers are required to install / fix steel reinforcement onsite
Installation
Logistics Up to 20% less trucks delivering reinforcements to site – frees up site space and saves crane, manpower & time
Site Crane Handles up to 20% less steel and frees up crane time for other construction activities thereby speeding up construction
Concrete Savings Reduction in structural element size is possible when used with appropriate grade of concrete and results in overall dead load being reduced
More usable space More floor space is usable with column size reduction
Less formwork Possible to reduce formwork needed for Columns and Beams due to member size reduction
Lighter foundations Due to reduction in members size resulting in lighter super structure, foundation loads and cost can be reduced
Storage space Space required for site storage of steel reinforcement can be reduced by up to 20%
Improved Safety Site safety will be improved due to less material handling, steel fixing etc
Time reduction Overall time savings can be accomplished by factoring in the earlier stated benefits
Cost reduction Overall cost reduction can be achieved from reduced Material, Manpower, Construction Time etc
Mass (kg/m) 0.222 0.395 0.617 1.042 0.617 1.042 1.579 2.466 2.984 3.854 4.834 6.313 9.864 15.413
Length (m) 6 6 12 12 12 12 12 12 12 12 12 12 12 12
Weight / bundle (mt)* 1.002 1.005 2.006 2.013 2.029 2.026 2.046 2.071 2.005 2.127 2.088 2.121 2.131 2.035
6
Grade 500
Specifications Grade Yield Tensile Ratio Cal. Elong Agt Bend Rebend
min min (min) method 5D (min %) (size : mm) (size : mm)
(N/mm2) (N/mm2) (min %)
SS2 Part 2: 1999 RB500W 500 550 1.05 Nominal 14 2.5 6/8/10:~3D 6/8/10:~5D
12:~4D 12:~5D
16&20:5D 20&25:8D
25/32/40:~6D 32/40:10D
(160° to 180°) (90° - 30min - 20°)
SS 560: 2016 B500B 500 - 650 Y*1.08 1.08 Nominal 5 ≤16mm : 3D ≤16mm : 4D
>16mm : 6D >16mm : 7D
AS/NZS 4671: 2001 500N 500 - 650 Y*1.08 1.08 Nominal 5 all sizes : 4D <16mm : 4D
(<16 bend 90° >20mm : N.A.
>20 bend 180°) (90° - 1hr - 90°)
500E 500 - 600 Y*(1.15-1.40) 1.15-1.40 Nominal 10 same as 500N same as 500N
500L 500 - 750 Y*1.03 1.03 Nominal 1.5 3D 90° - 1hr - 20°
Others
Specifications Grade Yield Tensile Ratio Cal. Elong Agt Bend Rebend
min min (min) method 5D (min %) (size : mm) (size : mm)
(N/mm2) (N/mm2) (min %)
AS/NZS 4671: 2001 250N 250 Y*1.08 1.08 Nominal 5 same as 500N same as 500N
300E 300 - 380 Y*(1.15-1.50) 1.15-1.50 Nominal 15 same as 500N same as 500N
SIRIM QAS 500A 500 - 650 <8mm: Norminal <8mm: 1.0 <=16mm : 4D
1.02 >=8mm: 2.5 >16mm : 7D
>=8mm: (90° - 1hr - 20°)
1.05
MS 146: 2014 500B 500 - 650 Y*1.08 1.08 Norminal 5.0 <=16mm : 4D
>16mm : 7D
(90° - 1hr - 20°)
SLSI
SLS 375: 2009 RB 500 500 - 650 D<8mm Effective 14 D<8mm 3D </=16~4D
~ 1.02 ~ 1.0 (180°) >16~7D
D>=8mm D>=8mm 90° - 60min
~ 1.05 ~ 2.5 (100°C) - 20°
SNI
SNI 07-2052-2002 Bj TS 40 390 560 D<32mm~18 5D
32<=D<40mm~16 (180°)
D=40mm~14
7
5 0 0 E M A