Sie sind auf Seite 1von 2

Microprocessor

M O T OR SPEE D CO N T RO L L ERS

M O D E L 1207

• Over voltage and under voltage protection.


• Fully compatible with 1311, 1314, and 1307
Programmers for full parametric adjustment, tuning,
test and diagnostics.
• Complete diagnostics of the controller can also be
accomplished with the built-in status LED.
• Potentiometers (on board) provide adjustment for
acceleration rate, creep speed, low speed, plug
current and main current limit by direct screwdriver
adjustment, where a programmer is unavailable.
Only single mode, two speed operation is
available when potentiometers are active.
• Meets or exceeds EEC fault detection requirements with
circuitry and software to detect faults in the throttle circuit,
MOSFET drive circuits, MOSFET transistors, contactor
DESCRIPTION drivers and contactors.
Curtis PMC 1207 series of motor speed controllers feature • Input sequencing options include neutral start (HPD) and
a microprocessor based logic section combined with a static return to off (SRO).
proven MOSFET power section. The 1207 series control- • True arcless contactor switching with microprocessor
lers are efficient, cost effective and easy to install. controlled contactor sequencing.
• Throttle position variable or fixed plugging
APPLICATION current options.

The Curtis PMC 1207 controllers are ideally suited for • Neutral braking option provides for automatic plug braking
in neutral.
small electric vehicle applications, such as walkie fork/
pallet trucks, mini personnel carriers, sweepers, and other • MultiMode™ option for programmable two mode (current
small series or compound motor applications.
limit, speed, acceleration) operation.
• Emergency reverse function (belly button) provides full
F eat u res function with a single input. Additional output provides for
an emergency reverse circuit
• Compact size. continuity check.
• Advanced high frequency power section utilizing custom • Anti-rollback (ramp start) function gives full power for
power MOSFETs provides high efficiency, silent operation starting on ramps.
and reduced motor and battery losses.
• Simple contactor and switch wiring. Coil drivers are
• Power connections made by solid copper busses with monitored for short and open circuit for
polarized Molex connector for control signals. fail-safe operation.
• Thermal protection and compensation circuitry provide • Flexible throttle circuitry accepts a variety of
under temperature cutback, constant current limit over the throttle types including: 5k-0, 0-5k, 0-5v, 0-10v, and three
operating range and linear rollback in over temperature. wire potentiometer.
No sudden loss of power under any thermal conditions.

CURTIS INSTRUMENTS, INC. CURTIS INSTRUMENTS, (UK) LTD. CURTIS INSTRUMENTS INDIA
200 KISCO AVENUE 235 East Airway Blvd. 5 Upper Priory Street PRIVATE LTD.
MT. KISCO, NY 10549 Livermore, CA 94551 Northampton NN1 2PT 1199, Ghole road
USA USA England Pune 411004, INDIA
TEL (914) 666-2971 TEL (925) 961-1088 TEL 44 (0) 1604-629755 TEL 91 (0) 20-5531288
FAX (914) 666-2188 FAX (925) 961-1099 FAX 44 (0) 1604-629876 FAX 91 (0) 20-5539192

www.curtisinstruments.com
M O D E L 1207

MODEL CHART
1 MIN 5 min 1 Hour Typ. Voltage Undervoltage AMBIENT TEMP.
CURTIS PMC VOLTAGE RATING RATING RATING DROP @ 100A CUTBACK RANGE
MODELS (volts) (amps) (amps) (amps) (volts) (volts) (C°)

1207-11XX 24-36 250 150 100 0.35 16 -25 to 50


1207-21XX 24-36 300 170 110 0.30 16 -25 to 50

DIMENSIONS 4 TERMINALS:
8.4 (.33") DIA HOLE THRU
165 (6.50") 21.0 (.83") X 16.0 (.63") X 1.5 (.06") THK

28.0 (1.10")

61.0(2.40")
60.0 (2.36")

4.8 (.19")
66.0 (2.60")

122 (4.80")

1 2 1 2 1 2 1 2 1 2
0 3 0 3 0 3 0 3 0 3
OFF 4 OFF 4 OFF 4 OFF
6.73 (0.265") DIA 4 OFF 4
MAIN PLUG ACCEL. CREEP LOW STATUS
TYP 3 PLCS CURRENT L I M I T SPEED L I M I T
6.3 (.25") 152.4 (6.00")
Potentiometer adjustment and Programmer connection access

TYPICAL WIRING DIAGRAM

BRAKE MODE EMERGENCY FORWARD REVERSE CONTACTORS


REVERSE REVERSE FORWARD MAIN

BRAKE EMERGENCY REVERSE


REVERSE
EMERGENCY
KEYSWITCH MODE FORWARD REVERSE
CHECK
KEYSWITCH THROTTLE 0-10 VOLT
5K - 0 (TYPICAL)
THROTTLE

M- A2 16 9
POLARITY
DIODE
B- B+
8 1
CONTROL
FUSE

POWER MAIN
FUSE CONTACTOR

B+
POT WIPER MAIN REVERSE
LO (VOLTS)
S2 S1
FORWARD REVERSE
RHEOSTAT POT FORWARD SHUNT FIELD
(5KΩ ) HI
CONTACTOR CONTACTOR

THROTTLE INPUTS OUTPUT DRIVERS

B-
A
A1 A2

W A R R A N T Y Two year limited warranty from time of delivery.

is a trademark of Curtis Instruments, Inc.

Specifications subject to change without notice ©2006 Curtis Instruments, Inc. 50017 REV B 4/06

Das könnte Ihnen auch gefallen