Beruflich Dokumente
Kultur Dokumente
The MD6310 crawler-mounted blasthole drill is designed to Emissions: U.S. EPA Tier 4 Final
drill from 203 mm to 311 mm (8 in to 12.25 in) diameter holes Engine C32 @ 1,800 rpm
in Rotary or DTH (Down The Hole) modes with single pass
Rated horsepower SAE J1995 760 kW 1,018 hp
or multi pass depths.
Rated horsepower ISO 14396 752 kW 1,008 hp
Basic Specs Emissions: Equivalent to Tier 2
Engine C32 @ 1,800 rpm
13.7 m (44.9 ft) Mast
Rated horsepower SAE J1995 770 kW 1,032 hp
Hole diameter range 203-311 mm 8-12.25 in
Rated horsepower ISO 14396 765 kW 1,025 hp
Single pass depth 13.7 m 44.9 ft
Compressor
Multi pass depth Down to 74.3 m Down to 244 ft
Rotary drilling 56.6 m³/min (2,000 ft3/min)
Pull-down capacity Up to 289.13 kN Up to 65,000 lb @ 8.6 bar (125 psi)
Hoist capacity Up to 289.13 kN Up to 65,000 lb Rotary drilling 73.6 m³/min (2,600 ft3/min)
Hoist speed 44.76 m/min 146.8 ft/min @ 7.6 bar (110 psi)
Bit load (single pass) Up to 31 640 kg Up to 69,755 lb DTH drilling 42.2 m³/min (1,500 ft3/min)
17.5 m (57.4 ft) Mast @ 34.4 bar (500 psi)
Hole diameter range 203-311 mm 8-12.25 in Elevation capable
Single pass depth 17.5 m 57.4 ft Tier 2 Equivalent engine 4750 m 15,000 ft
Multi pass depth Down to 48 m Down to 157.5 ft Tier 4 Final engine 3658 m 12,000 ft
Pull-down capacity Up to 382.5 kN Up to 86,000 lb Angle drilling 30° (in 5° increments)
Hoist capacity Up to 382.5 kN Up to 86,000 lb
Hoist speed 37.4 m/min 122.7 ft/min
Bit load (single pass) Up to 42 149 kg Up to 92,922 lb
MD6 310 Specifications
Engine Choices
Cooling
Compressor/Receiver Choices
Climate Level 1 standard f luids and lubricants
• –1° C (30° F) temperatures
• With the compressors variable volume control, the operator can • Withstands high heat to 52° C (125° F)
limit air output and engine speed both resulting in reduced fuel Climate Level 2 Arctic f luids and lubricants
consumption. All of these compressors contain this feature. • –18° C (– 0.4° F) temperatures
• Compressor control box enclosure with air purged lines • Extra batteries
DTH drilling includes tool lubrication and hammer storage Climate Level 4 Arctic f luids and lubricants
• 42.2 m3/min (1,500 ft3/min) @ 34.4 bar (500 psi) with High • – 40° C (–40° F) temperatures
Pressure Receiver Tank for ASME/CRN/AU or CE Tank; • Engine coolant and water tank heater, battery trays
hammer storage and tool oiler • 50 Hz, High or Low Pressure Compressor, Tier 4 Final engine
Rotary drilling • Arctic fluids, Genset ready, heaters and blankets for tanks,
• 56.6 m3/min (2,000 ft3/min) @ 8.6 bar (125 psi); with Low Pressure extra batteries, heated water suction lines
Receiver Tank for ASME/CRN/AU or CE Tank • Shore power connection box with switchable 240-600 volt,
• 73.6 m3/min (2,600 ft3/min) @ 7.6 bar (110 psi) with Low Pressure 50 amp waterproof connection
Receiver Tank for ASME/CRN/AU or CE Tank
• Jacks, mast pivot and deck are welded integrally to mainframe • Auxiliary circuit pump
for maximum durability and long life • Two fan pumps
• Stationary rear deck; for vertical and angle drilling • Two primary pumps
• Pipe positioner for loading pipe • Scheduled Oil Sampling (S∙O∙S) ports
• Four leveling jacks to provide leveling on a 7° bench
(any orientation) Mast
13.7 m (44.9 ft) Mast Variable grip hydraulic break out wrench grip ranges
Single pass depth 13.7 m 44.9 ft • 177-219 mm (7.0-8.625 in)
Multi pass depth Down to 62.5 m Down to 205 ft • 235 mm (9.25 in)
Pulldown – rated single Up to 289.13 kN Up to 65,000 lb
cylinder pull-down/ Drill Pipe
hoist system
12.1 m (40 ft) pipes – requires 13.7 m (44.9 ft) Mast
Hoist Up to 289.13 kN Up to 65,000 lb quantity of four
Mast accessories manual One wire rope pipe catcher, DTH 178 mm 7 in
hydraulically actuated pipe
Rotary or DTH 193 mm 7.625 in
positioner, manual bit basket
Rotary 203 mm 8 in
Mast accessories hydraulic One hydraulic pipe catcher,
hydraulically actuated pipe Rotary 219 mm 8.625 in
positioner, hydraulic bit basket 7.62 m (25 ft) pipes – requires 17.5 m (57.4 ft) Mast
17.5 m (57.4 ft) Mast quantity of four
Single pass depth 17.5 m 57.4 ft DTH 178 mm 7 in
Multi pass depth Up to 48 m Up to 157.5 ft Rotary or DTH 193 mm 7.625 in
Pulldown – rated single Up to 382.5 kN Up to 86,000 lb Rotary 203 mm 8 in
cylinder pull-down/ Rotary 219 mm 8.625 in
hoist system 7.62 m (25 ft) pipes – requires 17.5 m (57.4 ft) Mast
Hoist – pull-down/hoist Up to 382.5 kN Up to 86,000 lb quantity of only two
Mast accessories manual Two wire rope (17.5 m/57.4 ft) Rotary 235 mm 9.25 in
pipe catchers, hydraulically
actuated pipe positioner, Tool Package Rotary
manual bit basket
Mast accessories hydraulic One hydraulic pipe catcher, plus • Roller deck bushing
one wire rope, hydraulically • Pipe positioner inserts
actuated pipe positioner, • Deck wrench, sliding
hydraulic bit basket • Shock sub and top sub adapter (option)
Angle drilling Available with either mast • Cross over hammer adapter
• Pipe wiper seal
Carousel and Pipe (Mast size dependent)
203 mm 8 in
• HVAC:
Operator Environment
– Floor vents in the foot rest area
– Roof-mounted air conditioner/heating/pressurizing unit
• Cab, Standard
– Filter access from deck, does not require roof access, and has
– Fabric seat
approximately 500 hour service interval
– Single pane window glass
– Defogging HVAC vents on driller window
– Windshield wiper for driller window
• Cameras:
– Window shade (option)
– Mounted on the front and left sides to provide 360° view from
– Foldaway trainer’s seat (option)
operator’s seat
– Removable floor mat
– Camera on the mast to view pipe carousel/top drive operation
• Cab, Premium
– Leather seat with heat and ventilation
– Dual pane window glass Operating System Controls (Standard)
– Zone controls for area light and spot lighting for night drilling
– Flood lights for the drill perimeter
– Spot lights for power group area; drill deck; mast carousel;
perimeter
• Drill depth indicator and interlocks • Basic/Manual – Centralized Manual Lube; Gravity Fill for fuel
• Auto level, auto retract, auto mast and water
• Drill assist (single pass auto drill) (option) • Standard – Fast Fill for fuel and water; Automatic
• Product Link Elite (option) Lubrication System
• Autonomy ready • Premium – Service center for lubricant drain and fi ll
• Command for Drilling enables each operator to manage more (compressor oil, hydraulic oil, gearbox oil, engine oil, tool
than one machine lubrication and grease), Automatic Lubrication System,
• Cat Terrain for Drills – Mining System Interface Fast Fill for fuel and water, blowdown hose
– Production
– Navigation Service Tool Options
Dimensions
1
2
4
5
6
7
4 1 6
2
Weights
Working weight range – minimum/maximum 75 800/97 000 kg 248,868/320,587 lb 75 500/97 500 kg 260,826/319,880 lb
Mandatory Choices
Mandatory choices may vary. Consult your Cat dealer for details.
Tank for ASME/CRN/AU or CE MAST retainer; total depth 62.5 m (205 ft)
– 73.6 m³/min (2,600 ft³/min) @ 7.6 bar • 13.7 m (44.9 ft) single pass depth – 193 mm (7.625 in) pipe; four pod with
(110 psi) with Low Pressure Receiver – Vertical or Angle Drilling retainer; total depth 62.5 m (205 ft)
Tank for ASME/CRN/AU or CE – Up to 289.13 kN (65,000 lb)
– 203 mm (8 in) pipe; four pod with
• DTH/High pull-down/hoist
retainer; total depth 62.5 m (205 ft)
– 42.5 m³/min (1,500 ft³/min) @ 34.4 bar • 17.5 m (57.4 ft) single pass depth – 219 mm (8.625 in) pipe; four pod with
(500 psi) with High Pressure Receiver – Vertical or Angle Drilling retainer; total depth 62.5 m (205 ft)
Tank for ASME/CRN/AU or CE; – 193 mm (7.625 in) pipe; five pod with
– Up to 382.5 kN (86,000 lb)
hammer storage and tool oiler retainer; total depth 74.6 m (244 ft)
pull-down/hoist
DRILL DECK MISCELLANEOUS catchers, hydraulically actuated pipe retainer; total depth 48 m (157.5 ft)
• Drill pipe thread greaser with reloadable positioner, manual bit basket – 193 mm (7.625 in) pipe; four pod with
tank that can also hold a disposable • 13.7 m (44.9 ft) Mast retainer; total depth 48 m (157.5 ft)
grease bucket – 203 mm (8 in) pipe; four pod with
Mandator y choices may vary. Consult your Cat dealer for details.
DRILL TOOL PACKAGES – 13.7 m (44.9 ft) MAST DRILL TOOL PACKAGES – 17.5 m (57.4 ft) MAST OPERATOR ENVIRONMENT
• ROTARY DRILLING Package • ROTARY DRILLING Package • Cab, Standard
– 193 mm (7.625 in) pipe diameter – one – 193 mm (7.625 in) pipe diameter – one – Fabric seat
piece roller deck bushing, pipe positioner piece roller deck bushing, pipe positioner – Single pane window glass
inserts, sliding deck wrench, cross over bit inserts, sliding deck wrench, cross over – Windshield wiper for driller window
sub, pipe wiper seal hammer adapter, pipe wiper seal – Removable floor mat
– 203 mm (8 in) pipe diameter – one piece – 203 mm (8 in) pipe diameter – one piece • Cab, Premium
roller deck bushing, pipe positioner roller deck bushing, pipe positioner
– Leather seat with heat and ventilation
inserts, sliding deck wrench, cross over inserts, sliding deck wrench, cross over
bit subs, pipe wiper seal hammer adapter, pipe wiper seal – Dual pane window glass
– 219 mm (8.625 in) pipe diameter – one – 219 mm (8.625 in) pipe diameter – two – Front window guard
piece roller deck bushing, pipe positioner piece bushing, pipe positioner inserts, – Foot rest
inserts, sliding deck wrench, cross over bit sliding deck wrench, cross over hammer – Additional in-cab storage box
subs, pipe wiper seal adapter, pipe wiper seal – Additional windshield wipers on front
• DTH DRILLING Package – 235 mm (9.25 in) pipe diameter – one and rear windows
– 178 mm (7 in) pipe diameter – two piece piece roller deck bushing, pipe positioner • Lighting
bushing, pipe positioner inserts, sliding inserts, sliding deck wrench, cross over bit – Standard – Halogen – 1,300 lumens flood
deck wrench, cross over adapter for sub, pipe wiper seal light on perimeter, area spot lights have
hammer, pipe wiper seal • DTH DRILLING Package 1,950 lumens
– 193 mm (7.625 in) pipe diameter – two – 178 mm (7.0 in) pipe diameter – two piece – Premium – LED – 4,200 lumens per flood
piece bushing, pipe positioner inserts, bushing, pipe positioner inserts, sliding light on perimeter, area spot lights have
sliding deck wrench, cross over adapter deck wrench, cross over adapter for 1,950 lumens, mast clearance lights and
for hammer, pipe wiper seal hammer, pipe wiper seal cab mounted yellow strobe light and front
– 193 mm (7.625 in) pipe diameter – two mounted tram beacon
piece bushing, pipe positioner inserts, • View hatch
sliding deck wrench, cross over adapter – Deck cover plate in lieu of viewing hatch
for hammer, pipe wiper seal – Viewing hatch with spot light
• Decals
SUBS
– Decals (films) – ANSI
• Shock Absorbers with crossover sub
– ISO (films) – ISO
– 178 mm (7 in)
– 193 mm (7.625 in)
– 203 mm (8 in)
– 219 mm (8.625 in)
– 235 mm (9.25 in)
• Top Subs
– 193 mm (7.625 in)
– 203 mm (8 in)
– 219 mm (8.625 in)
– 235 mm (9.25 in)
Mandator y choices may vary. Consult your Cat dealer for details.
for all pivot points; Gravity Fill for fuel – 50 Hz High Pressure Compressor, Tier 2
and water or 4 Final engine
– Standard – Fast Fill for water and fuel; – Arctic fluids, Genset ready, heater and
Automated lubrication system blankets for tanks, extra batteries, heated
– Premium – Service center for lubricant
water suction lines
drain and fill, Automated lubrication
– Shore power connection box with
blowdown hose
waterproof connection
• Water injection with 1514 L (400 gal) tank battery trays, and provision for fuel
10
Factory Options
• Mast access ladder, mast grating and up to 235 mm (9.25 in) pipe
– Rotary – 219 mm (8.625 in)
lanyard posts • 7.62 m (25 ft) Pipes, 17.5 m (57.4 ft) Mast –
TECHNOLOGY PRODUCTS Carousel accepts quantity of four
DECK MISCELLANEOUS – DTH – 178 mm (7 in)
• Product Link Elite – cellular
• Pipe thread greaser – Rotary/DTH – 193 mm (7.625 in)
• Product Link Elite – satellite
• Tool box – Rotary – 203 mm (8 in)
• Product Link Elite – Dual (cellular and
satellite) – Rotary – 219 mm (8.625 in)
OPERATOR ENVIRONMENT
• Terrain for Drilling – Rotary – 235 mm (9.25 in) Carousel
11
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web AEHQ8038-01 (03-2018)
at www.cat.com Replaces AEHQ8038
© 2018 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice. Featured machines in photos may include
additional equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge”
trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may
not be used without permission.