Beruflich Dokumente
Kultur Dokumente
(/)
Advertisement
(/wp-content/uploads/2010/09/12v-gelled-electrolyte-
battery-charger.gif)
12V Gelled-Elect-
rolyte Battery Charger
P. MARIAN (HTTPS://WWW.ELECTROSCHEMATICS.COM/AUTHOR/ADMIN/)
(https://www.facebook.com/sharer/sharer.php?u=https://www.electroschematics.com/6052/12-v-gelled-electrolyte-battery-charger/)
(https://twitter.com/share) (/qa/)
battery chargers (/tag/battery-charger-circuits) LM301A (/tag/lm301a) LM350 (/tag/lm350)
This circuit is a high-performance charger for gelled-electrolyte lead-acid batteries. This charger quickly recharges the battery and
shuts o at full charge. It uses the well-known LM301A and LM350 ICs.
Initially, charging current is limited to 2A. As the battery voltage rises, current to the battery decreases, and the current had
decreased to 150 mA, the charge switches to a lower oat voltage which prevents overcharge.
When the start switch is pushed, the output of the charger goes to 14.5V. As the battery approaches full charge, the charging
current decreases and the output voltage is reduced to 14.5V to about 12.5V, terminating the charging. Transistor then lights the
LED as a visual indicator of full charge.
https://www.electroschematics.com/6052/12-v-gelled-electrolyte-battery-charger/ 1/7
25/11/2018 12V Gelled-Electrolyte Battery Charger
(https://www.electroschematics.com/wp-
content/uploads/2010/09/12v-gelled-electrolyte-battery-charger.gif)
Previous
Step Alarm Circuit
(https://www.electroschematics.com/6050/step-alarm/)
Next
Wind Powered Battery
Charger
(https://www.electroschematics.com/6054/wind-powered-battery-charger/)
Related Tutorials
No related posts.
i need to interface r c circuit with the internal ADC pin of pic controller (/qa/10887/)
https://www.electroschematics.com/6052/12-v-gelled-electrolyte-battery-charger/ 2/7