Sie sind auf Seite 1von 2

TechnicalNote

IMPORTANT NOTICE Volumetric


One Component PN Remarks
Usage Instructions Hydrapoint Composite 2 8891 To be used with PN 8898
Hydrapoint Composite 5 8890 To be used with PN 8898
Cleaning the Autotitrator Hydrapoint Composite 5K 8892 To be used with PN 8898
Karl Fisher reagent 5 8792 To be used with PN 8898
As with all instruments, proper maintenance enhances Karl Fisher reagent 2 8834 To be used with PN 8898
performance. This is especially true when initially using Hydrapoint Methanol Dry 8898 Solvent for one component titration
HYDRA-POINT Reagents on autotitrators. Two-Component
Hydrapoint Titrant 2 8845 Titrant to be used with PN 8855
HYDRA-POINT Reagents use different proprietary chemical
Hydrapoint Titrant 5 8844 Titrant to be used with PN 8855
compounds than other reagent systems (Hydranal®, Hydrapoint Solvent G 8855 Solvent to be used with Titrant
Aquastar®). Residuals left in a vessel or buret will lead to
Coulometric
erratic results. Specifically, HYDRA-POINT one component
With Diafragm PN Remarks
reagents use different proprietary amines than other
Hydrapoint Coulometric 8862 Analyte for use in cells with
reagents and will not provide reproducible results if used ANO diaphragm
in their presence. If the titrator is not properly cleaned, Hydrapoint Coulometric CAT 8863 Cathalyte for use in cells with
diaphragm
the amines will mix and you will get erratic results.
No Diafragm
HYDRA-POINT two component reagents use xylene as a
Hydrapoint Coulometric Gen 8860 Reagent for cells without diaphragm
solvent base. Xylene was chosen because it is extremely Hydrapoint Coulometric 8861 Reagent for use in oven technique
non-hygroscopic and is remarkably stable. However, when Oven

combined with large quantities of other reagent mixtures


Auxiliaries
(i.e., 2-methoxyethanol, iodine, amines, etc.), salts can PN Remarks
precipitate out, interfering with results. Hydrapoint Buffer 8899 Buffer to control pH during analysis
Sodium Tartrate diHydrate 0317 Substance for standardization
The prevention of potential problems lies in proper
cleaning. When changing over from other brands that If you have any questions, or would like to receive more
utilize different chemistry (Hydranal, Aquastar), wash the information please contact us (see back page for contact
buret and titration vessel thoroughly with chloroform. information).
Then, flush the entire system with methanol and let it dry.
By rinsing with chloroform and then rinsing with methanol,
the titrator is now cleaned and ready for optimum
performance with HYDRA-POINT Reagents.

T E C H N I C A L N O T E | www.avantormaterials.com
Phillipsburg, NJ 9001: 2008 & 14001: 2004
Paris, KY 9001: 2008
Mexico City, Mexico 9001: 2008
Deventer, the Netherlands 9001: 2008 & 14001: 2004 & 13485: 2003
Selangor, Malaysia 9001: 2008

About Avantor™ Performance Materials


Avantor Performance Materials manufactures and markets high-performance chemistries and materials
around the world under several respected brand names, including the J.T.Baker®, Macron Fine Chemicals™,
Rankem™, Diagnova™, BeneSphera™, and POCH™ brands.

Avantor products are used in a wide range of industries. Our biomedical and life science solutions are
used in academic, industry and quality control laboratories for research, pharmaceutical production and
medical lab testing, while our electronics solutions are used in the manufacturing of semiconductors and
flat panel displays. Based in Center Valley, Pennsylvania (USA), Avantor is owned by an affiliate of New
Mountain Capital, LLC.

For additional information please visit www.avantormaterials.com or follow www.twitter.com/avantor_news

Ordering Information and Assistance Corporate Headquarters Worldwide Locations


Customer Service AskAvantor™ Avantor Performance Materials, Inc. • China • Malaysia • North America
tel: +31-570-687500 Our Web site features ASK Avantor,™ 3477 Corporate Parkway • India • Mexico • Taiwan
fax: +31-570-687574 which includes live chat capabilities Suite #200 • Korea • The Netherlands
e- mail: avantor.emea@avantormaterials.com with customer service representatives. Center Valley, PA 18034 For contact information at these locations, visit
www.avantormaterials.com www.avantormaterials.com/askavantor USA www.avantormaterials.com/Support/Contact-
Us/Worldwide-Directory.aspx
Lit Number: 3047
©2012 Avantor Performance Materials, Inc. All rights reserved.
Trademarks are owned by Avantor Performance Materials, Inc. or its affiliates unless otherwise noted.

Das könnte Ihnen auch gefallen