Beruflich Dokumente
Kultur Dokumente
L4949
Multifunction Very Low
Dropout Voltage Regulator
The L4949 is a monolithic integrated 5.0 V voltage regulator with a
MULTIFUNCTION
very low dropout and additional functions such as power–on reset and VERY LOW DROPOUT
input voltage sense. VOLTAGE REGULATOR
It is designed for supplying the micro–computer controlled systems
especially in automotive applications. SILICON MONOLITHIC
• Operating DC Supply Voltage Range 5.0 V to 28 V INTEGRATED CIRCUIT
• Transient Supply Voltage Up to 40 V
• Extremely Low Quiescent Current in Standby Mode
• High Precision Standby Output Voltage 5.0 V ±1%
• Output Current Capability Up to 100 mA
• Very Low Dropout Voltage Less Than 0.4 V
• Reset Circuit Sensing The Output Voltage 8
1
• Programmable Reset Pulse Delay With External Capacitor
• Voltage Sense Comparator N SUFFIX
PLASTIC PACKAGE
• Thermal Shutdown and Short Circuit Protections CASE 626
D SUFFIX
PLASTIC PACKAGE
CASE 751
Representative Block Diagram
Output
Voltage (Vout)
VZ 3 8 CT 4
Supply PIN CONNECTIONS
Voltage (VCC)
Preregulator
6.0 V
1
VCC 1 8 Vout
2.0 µA
Reset Si 2 7 So
6
VZ 3 6 Reset
+
2.0 V CT 4 5 Gnd
Regulator -
Reset Sense
Sense Vs Output
Input (So)
(Top View)
(Si)
7
2
+
1.23 V
-
1.23 Vref Sense
ORDERING INFORMATION
Operating
Device Temperature Range Package
5 Gnd
L4949N DIP–8
TJ = –40° to +125°C
L4949D SO–8
ABSOLUTE MAXIMUM RATINGS (Absolute Maximum Ratings indicate limits beyond which damage to the device may occur.)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
Rating Symbol Value Unit
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
DC Operating Supply Voltage VCC 28 V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
Transient Supply Voltage (t < 1.0 s) VCC TR 40 V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
Output Current Iout Internally –
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
Limited
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
Output Voltage Vout 20 V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
Sense Input Current ISI ±1.0 mA
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
Á
ÁÁÁÁ
ÁÁÁ
Á
ÁÁÁ
ÁÁ
Sense Input Voltage VSI VCC –
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
Output Voltages V
Reset Output VReset 20
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Sense Output
ÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Output Currents ÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
VSO 20
mA
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
Reset Output IReset 5.0
Sense Output ISO 5.0
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ
Preregulator Output Voltage
ÁÁÁÁÁ
ÁÁÁÁ
Preregulator Output Current
ÁÁÁ
ÁÁÁ
VZ
IZ
7.0
5.0
V
mA
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ESD Protection at any pin
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Human Body Model ÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ – 2000
V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
Machine Model – 400
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
Á
ÁÁÁÁ
ÁÁÁ
ÁÁÁ
Thermal Resistance, Junction–to–Air RθJA °C/W
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
P Suffix, DIP–8 Plastic Package, Case 626 100
D Suffix, SO–8 Plastic Package, Case 751 200
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
Maximum Junction Temperature
ÁÁÁ TJ 150 °C
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
Storage Temperature Range
NOTE: ÁÁÁÁÁÁÁ
ESD data available upon request.
Tstg –65 to +150 °C
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
ELECTRICAL CHARACTERISTICS (VCC = 14 V, –40°C < TJ < 125°C, unless otherwise specified.)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
Characteristic Symbol Min Typ Max Unit
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
Output Voltage (TJ = 25°C, Iout = 1.0 mA) Vout 4.95 5.0 5.05 V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
Output Voltage (6.0 V < VCC < 28 V, 1.0 mA < Iout < 50 mA) Vout 4.9 5.0 5.1 V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
Output Voltage (VCC = 35 V, t < 1.0 s, 1.0 mA < Iout < 50 mA) Vout 4.9 5.0 5.1 V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
Dropout Voltage Vdrop V
Iout = 10 mA – 0.1 0.25
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
Á
ÁÁÁ
ÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁ
Iout = 50 mA – 0.2 0.40
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
Iout = 100 mA – 0.3 0.50
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
Input to Output Voltage Difference in Undervoltage Condition VIO – 0.2 0.4 V
(VCC = 4.0 V, Iout = 35 mA)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁÁ ÁÁÁ
Line Regulation (6.0 V < VCC < 28 V, Iout = 1.0 mA)
ÁÁÁ
ÁÁÁ
Load Regulation (1.0 mA < Iout < 100 mA)
Regline
Regload
–
–
1.0
8.0
20
30
mV
mV
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Current Limit
Vout = 4.5 V ÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁ
ÁÁÁÁÁ
Á
ÁÁÁÁÁÁÁ
ÁÁ ÁÁÁ
ÁÁÁÁ ÁÁÁ
ÁÁÁ
ÁÁÁ
ILim
105 200 400
mA
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
Vout = 0 V – 100 –
µA
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
Quiescent Current (Iout = 0.3 mA, TJ < 100°C) IQSE – 150 260
Quiescent Current (Iout = 100 mA) IQ – – 5.0 mA
http://onsemi.com
2
L4949
ELECTRICAL CHARACTERISTICS (continued) (VCC = 14 V, –40°C < TJ < 125°C, unless otherwise specified.)
Characteristic Symbol Min Typ Max Unit
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
RESET
ÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁÁ ÁÁÁ
ÁÁÁ
ÁÁÁ
Reset Threshold Voltage VResth – Vout – 0.5 – V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Á
ÁÁÁÁÁ
ÁÁÁÁÁ ÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁÁ
@ TJ = 25°C ÁÁÁ
Reset Threshold Hysteresis
ÁÁÁ
ÁÁÁ
@ TJ = –40 to +125°C
VResth,hys
50
50
100
–
200
300
mV
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁÁ ÁÁÁ
Reset Pulse Delay (CT = 100 nF, tR ≥ 100 µs)
ÁÁÁ
ÁÁÁ
Reset Reaction Time (CT = 100 nF)
tResD
tResR
55
–
100
5.0
180
30
ms
µs
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁÁ ÁÁÁ
Reset Output Low Voltage (RReset = 10 kΩ to Vout, VCC ≥ 3.0 V)
ÁÁÁ
ÁÁÁ
Reset Output High Leakage Current (VReset = 5.0 V)
VResL
IResH
–
–
–
–
0.4
1.0 µA
V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁÁ ÁÁÁ
Delay Comparator Threshold
ÁÁÁ
ÁÁÁ
Delay Comparator Threshold Hysteresis
VCTth
VCTth, hys
–
–
2.0
100
–
– mV
V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
SENSE
ÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁÁ ÁÁÁ
ÁÁÁ
ÁÁÁ
Sense Low Threshold (VSI Decreasing = 1.5 V to 1.0 V) VSOth 1.16 1.23 1.35 V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁÁ ÁÁÁ
Sense Threshold Hysteresis
ÁÁÁ
ÁÁÁ
Sense Output Low Voltage (VSI ≤ 1.16 V, VCC ≥ 3.0 V, RSO = 10 kΩ to Vout)
VSOth,hys
VSOL
20
–
100
–
200
0.4
mV
V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
Sense Output Leakage (VSO = 5.0 V, VSI ≥ 1.5 V) ISOH – – 1.0 µA
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁ
ÁÁÁÁÁ
PREREGULATOR
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁÁ ÁÁÁ
Sense Input Current
ÁÁÁ
ÁÁÁ
ISI –1.0 0.1 1.0 µA
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
Preregulator Output Voltage (IZ = 10 µA) VZ – 6.3 – V
ÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
PIN FUNCTION DESCRIPTION
ÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Pin Symbol Description
ÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
1 VCC Supply Voltage
ÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
2 Si Input of Sense Comparator
ÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
3 VZ Output of Preregulator
ÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
4 CT Reset Delay Capacitor
5 Gnd Ground
ÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁ
6
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
7
Reset
SO
Output of Reset Comparator
Output of Sense Comparator
ÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
8 Vout Main Regulator Output
5.02
4.0
RL = 5.0 k
5.0 3.0 RL = 100 Ω
2.0
4.98
1.0
4.96 0
-40 -20 0 20 40 60 80 100 120 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10
TJ, JUNCTION TEMPERATURE (°C) VCC, SUPPLY VOLTAGE (V)
Figure 1. Output Voltage versus Figure 2. Output Voltage versus
Junction Temperature Supply Voltage
http://onsemi.com
3
L4949
250 0.40
TJ = 25°C
Vdrop , DROPOUT VOLTAGE (mV)
150
0.20 Iout = 50 mA
100
Iout = 10 mA
0.10
50
0 0
0.1 1.0 10 100 -40 -20 0 20 40 60 80 100 120
Iout, OUTPUT CURRENT (mA) TJ, JUNCTION TEMPERATURE (°C)
Figure 3. Dropout Voltage versus Figure 4. Dropout Voltage versus
Output Current Junction Temperature
3.0 3.0
VCC = 14 V
IQ, QUIESCENT CURRENT (mA)
2.0 2.0
1.0 1.0
0 0
0.1 1.0 10 100 0 5.0 10 15 20 25 30
Iout, OUTPUT CURRENT (mA) VCC, SUPPLY VOLTAGE (V)
6.0 4.7
VReset , RESET THRESHOLD VOLTAGE (V)
TJ = 25°C
4.66
5.0
VReset , RESET OUTPUT (V)
Upper Threshold
Resistor 10 k 4.62
4.0 from Reset Output
to 5.0 V 4.58
3.0
4.54
2.0
4.5 Lower Threshold
1.0 4.46
0 4.42
4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 -40 -20 0 20 40 60 80 100 120
Vout, OUTPUT VOLTAGE (V) TJ, JUNCTION TEMPERATURE (°C)
http://onsemi.com
4
L4949
6.0 1.4
VSO , SENSE OUTPUT VOLTAGE (V)
1.38
1.0 1.24
1.22
0 1.2
1.0 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5 -40 -20 0 20 40 60 80 100 120
VSI, SENSE INPUT VOLTAGE (V) TJ, JUNCTION TEMPERATURE (°C)
APPLICATION INFORMATION
Supply Voltage Transient less than 8.0 V supply transients of more than 0.4 V/µs can
High supply voltage transients can cause a reset output cause a reset signal perturbation. To improve the transient
signal perturbation. For supply voltages greater than 8.0 V behavior for supply voltages less than 8.0 V a capacitor at
the circuit shows a high immunity of the reset output against Pin 3 can be used. A capacitor at Pin 3 (C3 ≤ 1.0 µF) reduces
supply transients of more than 100 V/µs. For supply voltages also the output noise.
Vout CO
C3
VZ
(optional) 3 8 CT 4
2.0 µA Reset
6
10 kΩ
+ Vout
- 2.0 V
Regulator
Reset
VCC RSO 10 kΩ
So
Si 7
2
+
- 1.23 V
1.23 Vref
Sense
5 Gnd
NOTES: 1. For stability: Cs ≥ 1.0 µF, CO ≥ 4.7 µF, ESR < 10 Ω at 10 kHz
2. Recommended for application: Cs = CO = 10 µF
http://onsemi.com
5
L4949
OPERATING DESCRIPTION
The L4949 is a monolithic integrated low dropout voltage Vout
regulator. Several outstanding features and auxiliary
functions are implemented to meet the requirements of
supplying microprocessor systems in automotive
applications. Nevertheless, it is suitable also in other Vout
applications where the present functions are required. The 5.0 V
modular approach of this device allows the use of other
features and functions independently when required.
Voltage Regulator
The voltage regulator uses an isolated Collector Vertical
PNP transistor as a regulating element. With this structure,
very low dropout voltage at currents up to 100 mA is 0V 2.0 V 5.0 V 35 V
VCC
obtained. The dropout operation of the standby regulator is
maintained down to 3.0 V input supply voltage. The output Figure 13. Output Voltage versus Supply Voltage
voltage is regulated up to the transient input supply voltage
of 35 V. With this feature no functional interruption due to
overvoltage pulses is generated. 3.0
The typical curve showing the standby output voltage as
http://onsemi.com
6
L4949
Reset Circuit Standby output voltage drops below the reset threshold
The block circuit diagram of the reset circuit is shown in only a bit longer than the reaction time results in a shorter
Figure 15. reset delay time.
The reset circuit supervises the output voltage. The reset The nominal reset delay time will be generated for
threshold of 4.5 V is defined with the internal reference standby output voltage drops longer than approximately
voltage and standby output divider. 50 µs. The typical reset output waveforms are shown in
The reset pulse delay time tRD, is defined with the charge Figure 16.
time of an external capacitor CT:
Vout Vin 40 V
C x 2.0 V
t T
RD 2.0 A 5.0 V Vout1
VRT + 0.1 V
The reaction time of the reset circuit originates from the UKT
discharge time limitation of the reset capacitor CT and is
3.0 V
proportional to the value of CT. The reaction time of the reset t
Reset
1.23 V Vref
tRD tRD
tRR
2.0 µA
22 k Reset Output
Switch On Input Drop Dump Switch Off
Overload
http://onsemi.com
7
L4949
PACKAGE DIMENSIONS
N SUFFIX
PLASTIC PACKAGE
CASE 626–05
ISSUE L
NOTES:
1. DIMENSION L TO CENTER OF LEAD WHEN
FORMED PARALLEL.
8 5 2. PACKAGE CONTOUR OPTIONAL (ROUND OR
SQUARE CORNERS).
3. DIMENSIONING AND TOLERANCING PER ANSI
–B– Y14.5M, 1982.
1 4 MILLIMETERS INCHES
DIM MIN MAX MIN MAX
A 9.40 10.16 0.370 0.400
B 6.10 6.60 0.240 0.260
F C 3.94 4.45 0.155 0.175
D 0.38 0.51 0.015 0.020
NOTE 2 –A– F 1.02 1.78 0.040 0.070
L G 2.54 BSC 0.100 BSC
H 0.76 1.27 0.030 0.050
J 0.20 0.30 0.008 0.012
K 2.92 3.43 0.115 0.135
C L 7.62 BSC 0.300 BSC
M --- 10 --- 10
J N 0.76 1.01 0.030 0.040
–T–
SEATING N
PLANE
M
D K
H G
0.13 (0.005) M T A M B M
http://onsemi.com
8
L4949
PACKAGE DIMENSIONS
D SUFFIX
PLASTIC PACKAGE
CASE 751–07
ISSUE W
–X–
NOTES:
A 1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
8 5 3. DIMENSION A AND B DO NOT INCLUDE MOLD
PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER
B S 0.25 (0.010) M Y M SIDE.
1 5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
4
K PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN
–Y– EXCESS OF THE D DIMENSION AT MAXIMUM
MATERIAL CONDITION.
G MILLIMETERS INCHES
DIM MIN MAX MIN MAX
C N X 45 A 4.80 5.00 0.189 0.197
B 3.80 4.00 0.150 0.157
SEATING
PLANE C 1.35 1.75 0.053 0.069
–Z– D 0.33 0.51 0.013 0.020
G 1.27 BSC 0.050 BSC
0.10 (0.004) H 0.10 0.25 0.004 0.010
H M J J 0.19 0.25 0.007 0.010
D K 0.40 1.27 0.016 0.050
M 0 8 0 8
N 0.25 0.50 0.010 0.020
0.25 (0.010) M Z Y S X S
S 5.80 6.20 0.228 0.244
http://onsemi.com
9
L4949
Notes
http://onsemi.com
10
L4949
Notes
http://onsemi.com
11
L4949
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
http://onsemi.com L4949/D
12