Beruflich Dokumente
Kultur Dokumente
2. Selecting a Pre-Set.
To Select the required examination from the labeled buttons below the monitor.
If the examination is not on these buttons press “Preset D” and select from the list.
The pre-set will set the imaging parameters such as Gain, Depth and TGC and Doppler settings.
USB Storage
Press the button marked ‘Patient List” on key board (“F1”) and a list of examinations stored on the Hard Disk
will be displayed. Select the patient you wish to transfer and set on ‘DICOM IMAGES”.
Now Select “Image Index” to display images and clips from the study.
Nemio XG Getting Started How To Guide
Select the images you wish to transfer, or press “Select All” and then click on “Export”.
Before sending images to the CD Cache a CD must be inserted into the CD burner. Use the same procedure as
shown above for USB but select CDR/DVD Cache instead of USB Device. This will send the information into a
cache before it is burnt onto the CD.
To burn the CD select “Burn” from the top of the patient list.
The CD will automatically be ejected once the information has been written to the CD.