Beruflich Dokumente
Kultur Dokumente
using RTC
AIM:
The main aim of the project is to develop a system which operated based on the time.
PURPOSE:
The purpose of the project is to design an automated system for the operating of the
electrical appliances.
BLOCK DIAGRAM:
Signal
ATMEGA8/16
Power supply Condition
Machinery 1
I I ing Unit
O O
SRAM
P P
RTC EEPROM
O FLASH O
Chemical
LCD R R RELAY
Valve
T T
Keypad LOAD
S UART S RELAY
(Light)
BLE
Modem
Mobile App.
(Machinery
Control)
POWER SUPPLY:
DESCRIPTION:
Now a day, there is a lot of requirement to control the appliances in an industry or in a
factory which are present in remote location, in these situations we need to go to the place
where the switch board has been situated which is a time consuming process. The main aim
of the present project is to provide a facility by which we can control all the high standard
machineries and appliances connected to the power grid like Lights, Fans, Machineries,
Doors, and Air Cooler etc. through an automated the control board based on the time and
Advanced BLE module for remote accessing manually.
The microcontroller plays a major role in controlling the devices to switch on or off
the particular device according to the time provided by the RTC. Here in this project a power
grid is connected to control the devices. The applications of this system are not only bound to
the controlling the appliances but also we can use this in specific unmanned industries to
control different machineries from the control room with wireless BLE technology and also
in time to time.