Beruflich Dokumente
Kultur Dokumente
ratings guide
w w w . c a t - i n d u s t r i a l . c o m
Table of Contents
Table of Contents
Diesel Engine Rating Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
ISO 9001:2000 Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
EPA & EU Non-Road Emissions Regulations . . . . . . . . . . . . . . . . . . . . . 3
C0.5, C0.7, C1.1, C1.5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
C1.6, C2.2, C3.4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3054C, 3054E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3056E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
C6.6 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3126, 3126B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
C7 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
C-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
C9 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
C-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
C11 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
C-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
C13 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3406 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
C-15, C-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
C15 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
C18 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
3408, 3412 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
3412E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
C27 ACERT, C32 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3500B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Gas Engines
G3400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
G3500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
G3600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Fire Pump Engines
3126 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3406 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3508 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3512 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3516 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Underground Mining
3406E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Technology
ADEM:A4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Analog Gage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Cat® Messenger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Cat Pocket Tec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
1
Caterpillar ® Engines
Abbreviations
NA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Naturally Aspirated
T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Turbocharged
TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Turbocharged/Aftercooled
TTA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Twin Turbo Aftercooled
PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Precombustion Chamber
ATAAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Air-to-Air Aftercooled
bhp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brake horsepower
bkW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brake Kilowatts
LE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Low Emission
JWAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jacket Water Aftercooled
SCAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Separate Circuit Aftercooled
E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronic
2 I N D U S T R I A L E N G I N E
Caterpillar Engines
bhp
0 33.5 67 100.6 134.1 167.6 201.1 234.7 268.2 301.7 335.2 368.8
C9
C7
3126B
C6.6
3056E
3054E
3054C
C3.4
C2.2
C1.6
C1.5
C1.1
C0.7
C0.5
0 25 50 75 100 125 150 175 200 225 250 275
bkW
2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
Stage II Stage IIIA Stage IIIB Stage IV
130-560 130-560
174-751 174-751
75-130 56-130
101-174 10 ppm Sulphur 75-174
37-75 Fuel Required
19-37 37-56
25-50 50-101 50-75
37-75 130-560
50-101 3 db Reduction in Machine Noise Level Bold = bkW 174-751
Regular = bhp 56-130
Required; 350 ppm Sulphur Fuel Required
75-174
European Non-road
R AT I N G S G U I D E 3
C0.5 • C0.7 • C1.1 • C1.5
C1.1
Specifications
C0.5 C0.7
Bore x Stroke . . . . . 67 x 72 mm (2.6 x 2.8 in). . . . . . . . . 67 x 72 mm (2.6 x 2.8 in)
Displacement . . . . . 0.5 liters (31 cu. in.) . . . . . . . . . . . . 0.7 liters (46.5 cu. in.)
Ship Weight (NA). . 62 kg (137 lbs) . . . . . . . . . . . . . . . . . . 76 kg (168 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 407 mm (16 in) . . . . . . . . . . . . . . . . . 442 mm (17.4 in)
Width . . . . . . . . . . . . . 371 mm (14.6 in) . . . . . . . . . . . . . . . 376 mm (14.8 in)
Height . . . . . . . . . . . . 523 mm (20.6 in) . . . . . . . . . . . . . . . 536 mm (21.2 in)
C1.1 C1.5
Bore x Stroke . . . . . 77 x 81 mm (3.0 x 3.2 in). . . . . . . . . 84 x 90 mm (3.3 x 3.5 in)
Displacement . . . . . 1.1 liters (69 cu. in.) . . . . . . . . . . . . 1.5 liters (92 cu. in.)
Ship Weight (NA). . 87 kg (191 lbs) . . . . . . . . . . . . . . . . . . 149 kg (329 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 496 mm (19.5 in) . . . . . . . . . . . . . . . 533 mm (21.0 in)
Width . . . . . . . . . . . . . 400 mm (15.7 in) . . . . . . . . . . . . . . . 427 mm (16.8 in)
Height . . . . . . . . . . . . 578 mm (22.6 in) . . . . . . . . . . . . . . . 621 mm (24.5 in)
Features Benefits
• Compact timing device for • Increase of horsepower and
injection pump torque capabilities by 10%
• Closed circuit breather • Quieter 3 db(A) noise reduction
• Improved governing system • 500-hour service intervals
• Optimized injectors • Single-side servicing
• Small installation package
Abbreviations used:
NA.................Naturally Aspirated
EPA Certified
Meets Tier 2, Stage II emissions requirements. Tier 2 refers to EPA (U.S.) requirements.
Stage II refers to European requirements.
4 I N D U S T R I A L E N G I N E
C1.6 • C2.2 • C3.4 D I E S E L S
C2.2
Specifications
C1.6 C2.2
Bore x Stroke . . . . . 77 x 81 mm (3.0 x 3.2 in). . . . . . . . . 84 x 100 mm (3.3 x 3.9 in)
Displacement . . . . . 1.5 liters (91 cu. in.) . . . . . . . . . . . . 2.2 liters (134 cu. in.)
Ship Weight (NA). . 104 kg (229 lbs) . . . . . . . . . . . . . . . . . 184 kg (406 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 55 mm (21.7 in) . . . . . . . . . . . . . . . . . 646 mm (25.5 in)
Width . . . . . . . . . . . . . 377 mm (14.8 in) . . . . . . . . . . . . . . . 426 mm (16.7 in)
Height . . . . . . . . . . . . 570 mm (22.4 in) . . . . . . . . . . . . . . . 674 mm (26.5 in)
C3.4
Bore x Stroke . . . . . 94 x 120 mm (3.7 x 4.74 in)
Displacement . . . . . 3.3 liters (201 cu. in.)
Ship Weight (NA). . 245 kg (540 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 781 mm (30.7 in)
Width . . . . . . . . . . . . . 649 mm (25.6 in)
Height . . . . . . . . . . . . 769 mm (30.3 in)
Features Benefits
• Compact timing device for • Increase of horsepower and
injection pump torque capabilities by 10%
• Closed circuit breather • Quieter 3 db(A) noise reduction
• Improved governing system • 500-hour service intervals
• Optimized injectors • Single-side servicing
• Small installation package
Abbreviations used:
NA.................Naturally Aspirated
T ....................Turbocharged
EPA Certified
Meets Tier 2, Stage II emissions requirements. Tier 2 refers to EPA (U.S.) requirements.
Stage II refers to European requirements.
R AT I N G S G U I D E 5
3054C • 3054E D I E S E L S
3054C
Specifications
3054C 3054E
Bore x Stroke . . . . . 105 x 127 mm (4.1 x 5 in) . . . . . . . . 105 x 127 mm (4.1 x 5 in)
Displacement . . . . . 4.4 liters (269 cu. in.) . . . . . . . . . . . 4.4 liters (269 cu. in.)
Ship Weight (NA). . 295 kg (650 lbs) . . . . . . . . . . . . . . . . . 295 kg (650 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 663 mm (26.1 in) . . . . . . . . . . . . . . . 663 mm (26.1 in)
Width . . . . . . . . . . . . . 563 mm (22.2 in) (NA) . . . . . . . . . . 563 mm (22.2 in) (NA)
Height . . . . . . . . . . . . 775 mm (30.5 in) (NA) . . . . . . . . . . 775 mm (30.5 in) (NA)
Features Benefits
• Cross flow cylinder head • Horsepower and torque
• New gear train capabilities optimized
• New balancer train • Convenient installation
• Integrated closed circuit breaker • Fuel timing control
• Electric lift pump • Lower fuel cost
• Open top deck block • 500-hour service intervals
• Integral oil cooler • Single-side servicing
• Choice of mechanical or
electronic FIE
Abbreviations used:
NA.................Naturally Aspirated
T ....................Turbocharged
TA..................Turbocharged/Aftercooled
E ....................Electronic
EPA Certified
Meets Tier 2, Stage II emissions requirements. Tier 2 refers to EPA (U.S.) requirements.
Stage II refers to European requirements.
6 I N D U S T R I A L E N G I N E
3056E D I E S E L S
3056E
Specifications
3056E
Bore x Stroke . . . . . 100 x 127 mm (3.9 x 5 in)
Displacement . . . . . 6 liters (366 cu. in.)
Ship Weight . . . . . . . 505 kg (1113 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 933 mm (36.7 in)
Width . . . . . . . . . . . . . 697 mm (27.4 in)
Height . . . . . . . . . . . . 792 mm (31.2 in)
Features
• Multi-piece exhaust manifold
• Engine control module
• High contact ratio gear train
• Peripheral fixed top cover
• Revised rear and oil seal
Benefits
• Horsepower and torque capabilities optimized
• Convenient installation
• Improved fuel efficiency = savings in operating cost
• Electronic control: full machine integration, engine history, and machine
protection
• 500-hour service intervals
• Single-side servicing
Abbreviations used:
TA..................Turbocharged/Aftercooled
E ....................Electronic
EPA Certified
Meets Tier 2, Stage II emissions requirements. Tier 2 refers to EPA (U.S.) requirements.
Stage II refers to European requirements.
R AT I N G S G U I D E 7
C6.6 ACERT D I E S E L S
C6.6 ACERT
Tier 3 Stage IIIA
Specifications
C6.6
Bore x Stroke . . . . . 105 x 127 mm (4.1 x 5 in)
Displacement . . . . . 6.6 liters (402.8 cu. in.)
Ship Weight (TA) . . 525 kg (1157 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 929 mm (36.6 in)
Width . . . . . . . . . . . . . 620 mm (24.4 in)
Height . . . . . . . . . . . . 1115 mm (43.9 in)
C6.6 Ratings
C Rating
(Intermittent)
bkW bhp rpm
TA
90 121 2200
117 157 2200
129 173 2500
159 213 2200
168 225 2200
186 250 2200
Features
• ADEM:A4 electronic engine controller
• Cat single fluid fuel system
• Oil lubricated fuel pump
• Single piece exhaust manifold
• 4-valve cross flow cylinder head
• Integrated fuel lift pump
• Auxiliary drive capability — front crank and SAE B PTO
Benefits
• Insulated timing cover and isolated oil pan and valve cover
reduce noise up to 3-5 dBa
• Demand-based pump
• Increased block and crankshaft strength
• Poly-V belt reduces maintenance and belt wear
• Outstanding cold start capability to -25°F/-32°C using glow plugs
• Ease of installation
• 500-hour service intervals
• Either side servicing
• Meets Tier 3/Stage IIIA emissions requirements
Abbreviations used:
NA.................Naturally Aspirated
EPA Certified
Meets Tier 3, Stage IIIA emissions requirements. Tier 3 refers to EPA (U.S.) requirements.
Stage IIIA refers to European requirements.
8 I N D U S T R I A L E N G I N E
3126 • 3126B D I E S E L S
3126B
Specifications
3126 3126B
Bore x Stroke . . . . . 110 x 127 mm (4.33 x 5.0 in) . . . . . 110 x 127 mm (4.33 x 5.0 in)
Displacement . . . . . 7.2 liters (442 cu. in.) . . . . . . . . . . . 7.2 liters (442 cu. in.)
Ship Weight . . . . . . . 549 kg (1210 lbs). . . . . . . . . . . . . . . . 588 kg (1295 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 967 mm (38 in) . . . . . . . . . . . . . . . . . 1078 mm (43 in)
Width . . . . . . . . . . . . . 674 mm (27 in) . . . . . . . . . . . . . . . . . 798 mm (31 in)
Height . . . . . . . . . . . . 923 mm (36 in) . . . . . . . . . . . . . . . . . 862 mm (34 in)
Features Benefits
• 3 flywheel housings • Starting motor meets SAE 1493
• 2 turbocharger locations safety standards
• 4 oil pan configurations • Maximum strength with minimum
• One-piece, stress-relieved weight
cylinder block
• Optional oil filter locations
• Two-piece articulated pistons
• Integrally cast cylinder block
• 45 bkW takeoff capability
R AT I N G S G U I D E 9
C7 ACERT D I E S E L S
C7 ACERT
Tier 3 Stage IIIA
Specifications
C7
Bore x Stroke . . . . . 110 x 127 mm (4.33 x 5.0 in)
Displacement . . . . . 7.2 liters (442 cu. in.)
Ship Weight . . . . . . . 588 kg (1295 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 1074 mm (42 in)
Width . . . . . . . . . . . . . 774 mm (30 in)
Height . . . . . . . . . . . . 1059 mm (42 in)
C7 Ratings In-Line 6
A Rating B Rating C Rating
(Continuous) (Intermittent)
bkW bhp rpm bkW bhp rpm bkW bhp rpm
ATAAC
149 200 1800- 149 200 2200- 186 250 1800-
2200 2500 2100
— — — 168 225 1800- 205 275 1800-
2200 2200
— — — — — — 224 300 1800-
2200
Features
• ADEM:A4 electronic engine controller
• HEUI fuel system
• Enhanced cylinder block
• Oil pans
• Mono steel piston
• Side cover breather
Benefits
• Same Cat 3126B platform
• Wastegated turbocharger optimizes airflow
• Cleaner combustion process
• Lightweight block design
• Easy installation in OEM equipment
• Improved joints reduce oil and coolant loss from engine
• Meets Tier 3/Stage IIIA emissions requirements
Abbreviations used:
ATAAC ..........Air-to-Air Aftercooled
EPA Certified
Meets Tier 3, Stage IIIA emissions requirements. Tier 3 refers to EPA (U.S.) requirements.
Stage IIIA refers to European requirements.
10 I N D U S T R I A L E N G I N E
C-9 D I E S E L S
C-9
Specifications
C-9
Bore x Stroke . . . . . 112 x 149 mm (4.41 x 5.87 in)
Displacement . . . . . 8.8 liters (537 cu. in.)
Ship Weight . . . . . . . 776 kg (1710 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 1198 mm (47 in)
Width . . . . . . . . . . . . . 819 mm (32 in)
Height . . . . . . . . . . . . 1002 mm (40 in)
Features
• ADEM III electronic engine controller
• HEUI fuel system
• Straightforward engine conversion
• Integrated oil cooler reduces weight, leaks, and engine width
• In-line, six-cylinder, air-to-air aftercooled engine
Benefits
• Easy installation of OEM equipment
• Mid-supported wet liner allows better fuel consumption and reduced
emissions
• Extended life with induction-hardened internal surface
• Removable liners for excellent rebuildability
Abbreviations used:
ATAAC ..........Air-to-Air Aftercooled
EPA Certified
Meets Tier 2, Stage II emissions requirements. Tier 2 refers to EPA (U.S.) requirements.
Stage II refers to European requirements.
R AT I N G S G U I D E 11
C9 ACERT D I E S E L S
C9 ACERT
Tier 3 Stage IIIA
Specifications
C9
Bore x Stroke . . . . . 112 x 149 mm (4.41 x 5.87 in)
Displacement . . . . . 8.8 liters (537 cu. in.)
Ship Weight . . . . . . . 776 kg (1711 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 1198 mm (47 in)
Width . . . . . . . . . . . . . 819 mm (32 in)
Height . . . . . . . . . . . . 1002 mm (39 in)
C9 Ratings In-Line 6
A Rating B Rating C Rating D Rating
(Continuous) (Intermittent)
bkW bhp rpm bkW bhp rpm bkW bhp rpm bkW bhp rpm
ATAAC
205 275 1800- 224 300 1800- 242 325 1800- 280 375 1800-
2200 2200 2200 2200
— — — — — — 261 350 1800- — — —
2200
Features
• ADEM:A4 electronic engine controller
• HEUI fuel system
• High efficiency oil filters
• Fractured split connecting rod
• Lightweight cylinder block
• Wastegated turbocharger
Benefits
• Mid-supported wet liner allows better fuel consumption and reduced
emissions
• Extended life with induction-hardened internal surface
• Optimized fuel injector control
• New oil filter reconfigured to reduce wear on engine
• Meets Tier 3/Stage IIIA emissions requirements
Abbreviations used:
ATAAC ..........Air-to-Air Aftercooled
EPA Certified
Meets Tier 3, Stage IIIA emissions requirements. Tier 3 refers to EPA (U.S.) requirements.
Stage IIIA refers to European requirements.
12 I N D U S T R I A L E N G I N E
C-10 D I E S E L S
C-10
Specifications
C-10
Bore x Stroke . . . . . 125 x 140 mm (4.9 x 5.5 in)
Displacement . . . . . 10.3 liters (629 cu. in.)
Ship Weight . . . . . . . 930 kg (2050 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 1287 mm (51 in)
Width . . . . . . . . . . . . . 918 mm (36 in)
Height . . . . . . . . . . . . 1078 mm (42 in)
Features
• Air-to-Air Aftercooled engine
• ECM constantly monitors engine response and automatically makes
adjustments
• Computerized or engine monitoring system
• CMS transmits all engine parameters over two-wire system
Benefits
• Electronic control module increases power and flexibility of diesel controls
• Improved acceleration response
• ECM stores diagnostic data, eliminates speed variation, and adjusts for
cold starts, rapid acceleration, and smoke reduction
• EMS offers multiple display components and installation flexibility
Abbreviations used:
ATAAC ..........Air-to-Air Aftercooled
R AT I N G S G U I D E 13
C11 ACERT D I E S E L S
C11 ACERT
Tier 3 Stage IIIA
Specifications
C11
Bore x Stroke . . . . . 130 x 140 mm (5.12 x 5.51 in)
Displacement . . . . . 11.1 liters (677 cu. in.)
Ship Weight . . . . . . . 930 kg (2050 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 1287 mm (51 in)
Width . . . . . . . . . . . . . 918 mm (36 in)
Height . . . . . . . . . . . . 1078 mm (42 in)
Features
• ADEM:A4 electronic engine controller
• MEUI fuel system
• Single-piece cross flow cylinder head
• High pressure fuel system
• Mono steel piston
• Leak-free technology
• Single/dual rear PTO
• Multi-layer steel head gaskets
Benefits
• Gear train is redesigned with increased capacity and decreasing noise
volume
• Option of laminated front housing significantly diminishes decibel output
• Oil pan isolation reduces noise volume
• Multi-layered steel hard gasket improves durability
• Steel spacer between two layers of spring steel increases gasket
resilience
• Gasket resilience increases engine life by decreasing leakage
• New highly efficient oil filter reduces engine wear and enhances
contamination control
• Meets Tier 3/Stage IIIA emissions requirements
Abbreviations used:
ATAAC ..........Air-to-Air Aftercooled
EPA Certified
Meets Tier 3, Stage IIIA emissions requirements. Tier 3 refers to EPA (U.S.) requirements.
Stage IIIA refers to European requirements.
14 I N D U S T R I A L E N G I N E
C-12 D I E S E L S
C-12
Specifications
C-12
Bore x Stroke . . . . . 130 x 150 mm (5.1 x 5.9 in)
Displacement . . . . . 12 liters (732 cu. in.)
Ship Weight . . . . . . . 939 kg (2070 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 1287 mm (51 in)
Width . . . . . . . . . . . . . 918 mm (36 in)
Height . . . . . . . . . . . . 1078 mm (42 in)
Features
• Air-to-Air aftercooled engine
• ECM constantly monitors engine response and automatically makes
adjustments
• Computerized or engine monitoring system
• CMS transmits all engine parameters over two-wire system
• 2-engine displacement with the same dimensions, weight, and heavier
engines
Benefits
• Electronic control module increases power and flexibility of diesel controls
• Improved acceleration response
• ECM stores diagnostic data, eliminates speed variation, and adjusts for
cold starts, rapid acceleration, and smoke reduction
• EMS offers multiple display components and installation flexibility
Abbreviations used:
ATAAC ..........Air-to-Air Aftercooled
R AT I N G S G U I D E 15
C13 ACERT D I E S E L S
C13 ACERT
Tier 3 Stage IIIA
Specifications
C13
Bore x Stroke . . . . . 130 x 157 mm (5.1 x 6.2 in)
Displacement . . . . . 12.5 liters (763 cu. in.)
Ship Weight . . . . . . . 939 kg (2070 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 1287 mm (51 in)
Width . . . . . . . . . . . . . 918 mm (36 in)
Height . . . . . . . . . . . . 1078 mm (42 in)
Features
• ADEM:A4 electronic engine controller
• MEUI fuel system
• Single-piece cross flow cylinder head
• High pressure fuel system
• Mono steel piston
• Leak-free technology
• Single/dual rear PTO
• Multi-layer steel head gaskets
Benefits
• Gear train is redesigned with increased capacity and decreasing noise
volume
• Option of laminated front housing significantly diminishes decibel output
• Oil pan isolation reduces noise volume
• Multi-layered steel hard gasket improves durability
• Steel spacer between two layers of spring steel increases gasket
resilience
• Gasket resilience increases engine life by decreasing leakage
• New highly efficient oil filter reduces engine wear and enhances
contamination control
• Meets Tier 3/Stage IIIA emissions requirements
Abbreviations used:
ATAAC ..........Air-to-Air Aftercooled
EPA Certified
Meets Tier 3, Stage IIIA emissions requirements. Tier 3 refers to EPA (U.S.) requirements.
Stage IIIA refers to European requirements.
16 I N D U S T R I A L E N G I N E
3406 D I E S E L S
3406
Specifications
3406C
Bore x Stroke . . . . . 137 x 165 mm (5.4 x 6.5 in)
Displacement . . . . . 14.6 liters (893 cu. in.)
Ship Weight (TA) . . 1356 kg (2990 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 1661 mm (65 in)
Width . . . . . . . . . . . . . 901 mm (36 in)
Height . . . . . . . . . . . . 1336 mm (53 in)
Features Benefits
• In-line, six cylinder diesel engine • Hard-faced intake and exhaust
• Heat-treated crankshaft with high valves resist wear at high heat
fatigue strength regrounds up to • High strength-to-weight ratio
3 times • Steel spacer between head and
• Chrome-plated stems guard block eliminates need for liner
against seizure counterbores, enhancing strength
• Direct injection fuel system and fatigue life of the block
• Durable for heavy-duty • Valves rotate 3 degrees each lift,
applications assuring good seating and uniform
temperature distribution
Abbreviations used:
T ....................Turbocharged
TA..................Turbocharged/Aftercooled
R AT I N G S G U I D E 17
C-15 • C-16 D I E S E L S
C-16
Specifications
C-15 C-16
Bore x Stroke . . . . . 137 x 165 mm (5.4 x 6.5 in) . . . . . . 140 x 171 mm (5.5 x 6.75 in)
Displacement . . . . . 14.6 liters (893 cu. in.) . . . . . . . . . . 15.8 liters (964 cu. in.)
Ship Weight . . . . . . 1342 kg (2959 lbs). . . . . . . . . . . . . . . 1342 kg (2959 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 1661 mm (65 in) . . . . . . . . . . . . . . . . 1661 mm (65 in)
Width . . . . . . . . . . . . . 901 mm (36 in) . . . . . . . . . . . . . . . . . 901 mm (36 in)
Height . . . . . . . . . . . . 1336 mm (53 in) . . . . . . . . . . . . . . . . 1336 mm (53 in)
Abbreviations used:
ATAAC ..........Air-to-Air Aftercooled SCAC ............Separate Circuit Aftercooled
EPA Certified
Meets Tier 2, Stage II emissions requirements. Tier 2 refers to EPA (U.S.) requirements.
Stage II refers to European requirements.
18 I N D U S T R I A L E N G I N E
C15 ACERT D I E S E L S
C15 ACERT
Tier 3 Stage IIIA
Specifications
C15
Bore x Stroke . . . . . 137 x 171 mm (5.39 x 6.73 in)
Displacement . . . . . 15.2 liters (923 cu. in.)
Ship Weight . . . . . . 1332 kg (2937 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 1661 mm (65 in)
Width . . . . . . . . . . . . . 901 mm (36 in)
Height . . . . . . . . . . . . 1336 mm (53 in)
Features
• ADEM:A4 electronic engine controller
• MEUI fuel system
• Oil filter
• Mono steel piston
• Connecting rod
• Cylinder block
Benefits
• 3% increase in power over Tier 2/Stage II model
• Mono steel piston has higher tolerance and narrow rings for superior oil
control
• Plateau oil liner provides deep groves to minimize oil consumption
and wear
• Extremely responsive with fast spinning wastegated turbo
• Meets Tier 3/Stage IIIA emissions requirements
Abbreviations used:
ATAAC ..........Air-to-Air Aftercooled
EPA Certified
Meets Tier 3, Stage IIIA emissions requirements. Tier 3 refers to EPA (U.S.) requirements.
Stage IIIA refers to European requirements.
R AT I N G S G U I D E 19
C18 ACERT D I E S E L S
C18 ACERT
Tier 3 Stage IIIA
Specifications
C18
Bore x Stroke . . . . . 145 x 183 mm (5.71 x 7.2 in)
Displacement . . . . . 18.1 liters (1106 cu. in.)
Ship Weight . . . . . . . 1332 kg (2937 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 1661 mm (65 in)
Width . . . . . . . . . . . . . 901 mm (36 in)
Height . . . . . . . . . . . . 1336 mm (53 in)
Features
• ADEM:A4 electronic engine controller
• MEUI fuel system
• Twin parallel turbocharger on 700 horsepower and above
• Best in power class density
• Monotherm piston
Benefits
• Narrow rings of monotherm piston and tighter tolerance allows superior
control
• Unique twin parallel turbo design providing superb response with low
fuel consumption
• Fuel efficiency gives savings in operating costs and cleaner air
• MEUI fuel system is highly reliable due to its design and volume of units
active in the market
• New connecting rods allow for better retention and clamping force
• Meets Tier 3/Stage IIIA emissions requirements
Abbreviations used:
ATAAC ..........Air-to-Air Aftercooled
EPA Certified
Meets Tier 3, Stage IIIA emissions requirements. Tier 3 refers to EPA (U.S.) requirements.
Stage IIIA refers to European requirements.
*D and E ratings meet Tier 2, Stage II emissions requirements. Tier 2 refers to EPA (U.S.)
requirements. Stage II refers to European requirements.
20 I N D U S T R I A L E N G I N E
3408 • 3412 D I E S E L S
3412
Specifications
3408 3412
Bore x Stroke . . . . . 137 x 152 mm (5.4 x 6.0 in) . . . . . . 137 x 152 mm (5.4 x 6.0 in)
Displacement . . . . . 18.0 liters (1099 cu. in.) . . . . . . . . . 27.0 liters (1649 cu. in.)
Ship Weight . . . . . . . 1497 kg (3300 lbs) (T) . . . . . . . . . . . 2205 kg (4420 lbs) (TA)
Approximate Dimensions:
Length . . . . . . . . . . . . 1590 mm (63 in) . . . . . . . . . . . . . . . . 2092.4 mm (82 in)
Width . . . . . . . . . . . . . 1231 mm (49 in) . . . . . . . . . . . . . . . . 1302.5 mm (51 in)
Height . . . . . . . . . . . . 1376 mm (54 in) . . . . . . . . . . . . . . . . 1447.2 mm (57 in)
R AT I N G S G U I D E 21
3412E D I E S E L S
3412E
Specifications
3412E
Bore x Stroke . . . . . 137.2 x 152.5 mm (5.4 x 6.0 in)
Displacement . . . . . 27 liters (1649 cu. in.)
Ship Weight . . . . . . 2436 kg (5365 lbs) (TA)
Approximate Dimensions:
Length . . . . . . . . . . . . 1995 mm (79 in)
Width . . . . . . . . . . . . . 1496 mm (59 in)
Height . . . . . . . . . . . . 1483 mm (58 in)
Features
• Excellent performance, durability, fuel economy, for heavy-duty applications
• Electronic diesel engine controls for optimum performance and
serviceability with a proven HEUI Caterpillar fuel system
Benefits
• Improved cold start, rapid acceleration, smoke reduction, and fuel economy
• HEUI provides higher fuel injection pressures at lower engine rpms with no
adjust injectors and no high pressure fuel lines
• Serviceability via PC-based information management system
Abbreviations used:
TA..................Turbocharged/Aftercooled ATAAC ..................Air-to-Air Aftercooled
TTA................Twin Turbo Aftercooled E ............................Electronic
JWAC ...........Jacket Water Aftercooled
EPA Certified
Meets Tier 2, Stage II emissions requirements. Tier 2 refers to EPA (U.S.) requirements.
Stage II refers to European requirements.
22 I N D U S T R I A L E N G I N E
C27/C32 ACERT D I E S E L S
C27 ACERT
Specifications*
C27 C32
Bore x Stroke . . . . . 137.7 x 152.4 mm (5.42 x 5.99 in). . 145.0 x 162 mm (5.1 x 6.38 in)
Displacement . . . . . 27 liters (1648 cu. in.) . . . . . . . . . . . 32.1 liters (1959 cu. in.))
Ship Weight . . . . . . . 2367 kg (5218 lbs)) . . . . . . . . . . . . . . 2435 kg (5368 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 2083 mm (82 in) . . . . . . . . . . . . . . . . 2083 mm (82 in)
Width . . . . . . . . . . . . . 1473 mm (58 in) . . . . . . . . . . . . . . . . 1473 mm (58 in)01 mm
Height . . . . . . . . . . . . 1499 mm (59 in) . . . . . . . . . . . . . . . . 1499 mm (59 in))
C27 Ratings
A Rating B Rating C Rating D Rating E Rating
(Continuous) (Intermittent)
bkW bhp rpm bkW bhp rpm bkW bhp rpm bkW bhp rpm bkW bhp rpm
ATAAC
544 730 1800- 612 820 1800- 708 950 1800- 783 1050 1800- 858 1150 1800-
2100 2100 2100 2100 2100
C32 Ratings
A Rating B Rating C Rating D Rating E Rating
(Continuous) (Intermittent)
bkW bhp rpm bkW bhp rpm bkW bhp rpm bkW bhp rpm bkW bhp rpm
ATAAC
641 860 1800- 708 950 1800- 783 1050 1800- 895 1200 1800- 969 1300 1800-
2100 2100 2100 2100 2100
Features
• ADEM:A4 electronic engine controller
• MEUI fuel system
• Leverage 3412E and C15/C18 technology
• Rear gear train
• Overhead cams
• Front housing and gear train
Benefits
• Excellent fuel efficiency and power density
• Wide power range from a single installation (from 730-1300 bhp)
• More production from same size package
• Improved cold start capability
EPA Certified
Meets Tier 2, Stage II emissions requirements. Tier 2 refers to EPA (U.S.) requirements.
Stage II refers to European requirements.
*All data is preliminary. Final turbo locations could affect dimensions.
R AT I N G S G U I D E 23
3500 D I E S E L S
3512
Specifications
3508 3512
Bore x Stroke . . . . . 170 x 190 mm (6.7 x 7.5 in) . . . . . . 170 x 190 mm (6.7 x 7.5 in)
Displacement . . . . . 34.5 liters (2105 cu. in.) . . . . . . . . . 51.8 liters (3158 cu. in.)
Ship Weight . . . . . . . 4318 kg (9500 lbs) . . . . . . . . . . . . . . 6091 kg (13 400 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 2136 mm (84 in) . . . . . . . . . . . . . . . . 2676 mm (105 in)
Width . . . . . . . . . . . . . 1703 mm (67 in) . . . . . . . . . . . . . . . . 1703 mm (67 in)
Height . . . . . . . . . . . . 1720 mm (68 in) . . . . . . . . . . . . . . . . 1720 mm (68 in)
3516
Bore x Stroke . . . . . 170 x 190 mm (6.7 x 7.5 in)
Displacement . . . . . 69 liters (4210 cu. in.)
Ship Weight . . . . . . . 6713 kg (14 800 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 3366 mm (133 in)
Width . . . . . . . . . . . . . 1703 mm (67 in)
Height . . . . . . . . . . . . 1718 mm (68 in)
Features
• Built with common parts — intake and exhaust valves, valve seat inserts,
and valve springs are all identical
• Scroll-type unit injectors for consistent, precise fuel delivery to each cylinder
• High-pressure fuel lines eliminated
• Advanced electronic control systems
Benefits
• Service efficiency reduces operating costs
• Superior fuel economy
• Repower savings/higher production with less fuel consumption
Abbreviations used:
TA..................Turbocharger/Aftercooled
24 I N D U S T R I A L E N G I N E
3500B D I E S E L S
3516B
Specifications
3508B 3512B
Bore x Stroke . . . . . 170 x 190 mm (6.7 x 7.5 in) . . . . . . 170 x 190 mm (6.7 x 7.5 in)
Displacement . . . . . 34.5 liters (2105 cu. in.) . . . . . . . . . 51.8 liters (3158 cu. in.)
Ship Weight . . . . . . . 4188 kg (9101 lbs) . . . . . . . . . . . . . . 5670 kg (12 500 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 2462 mm (97 in) . . . . . . . . . . . . . . . . 3067 mm (120.8 in)
Width . . . . . . . . . . . . . 1703 mm (67 in) . . . . . . . . . . . . . . . . 1785 mm (70.3 in)
Height . . . . . . . . . . . . 1720 mm (68 in) . . . . . . . . . . . . . . . . 1806 mm (71.1 in)
3516B
Bore x Stroke . . . . . 170 x 190 mm (6.7 x 7.5 in)
Displacement . . . . . 69 liters (4209 cu. in.)
Ship Weight . . . . . . . 7484 kg (16 500 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 3008 mm (119 in)
Width . . . . . . . . . . . . . 1443 mm (57 in)
Height . . . . . . . . . . . . 1980 mm (78 in)
Features
• Built with common parts — intake and exhaust valves, valve seat inserts,
and valve springs are all identical
• Scroll-type unit injectors for consistent, precise fuel delivery to each cylinder
• High-pressure fuel lines eliminated
• Advanced electronic control systems
Benefits
• Service efficiency reduces operating costs
• Superior fuel economy
• Repower savings/higher production with less fuel consumption
Abbreviations used:
TA..................Turbocharged/Aftercooled
EPA Certified
Meets Tier 1 emissions requirements. Tier 1 refers to EPA (U.S.) requirements.
R AT I N G S G U I D E 25
3600 D I E S E L S
3612
Specifications
3606 3608
Bore x Stroke . . . . . 280 x 300 mm (11 x 11.8 in) . . . . . . 280 x 300 mm (11 x 11.8 in)
Displacement . . . . . 110.8 liters (6764 cu. in.) . . . . . . . . 147.8 liters (9018 cu. in.)
Ship Weight . . . . . . . 15 680 kg (34 500 lbs) . . . . . . . . . . 19 000 kg (41 800 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 3988 mm (157 in) . . . . . . . . . . . . . . . 4828 mm (190 in)
Width . . . . . . . . . . . . . 1748 mm (69 in) . . . . . . . . . . . . . . . . 1748 mm (69 in)
Height . . . . . . . . . . . . 2626 mm (103 in) . . . . . . . . . . . . . . . 2626 mm (103 in)
3612 3616
Bore x Stroke . . . . . 280 x 300 mm (11 x 11.8 in) . . . . . . 280 x 300 mm (11 x 11.8 in)
Displacement . . . . . 221.7 liters (13 527 cu. in.) . . . . . . 295.6 liters (18 036 cu. in.)
Ship Weight . . . . . . . 25 140 kg (55 300 lbs) . . . . . . . . . . 29 950 kg (65 900 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 4562 mm (180 in) . . . . . . . . . . . . . . . 5482 mm (216 in)
Width . . . . . . . . . . . . . 1704 mm (67 in) . . . . . . . . . . . . . . . . 1704 mm (67 in)
Height . . . . . . . . . . . . 3231 mm (127 in) . . . . . . . . . . . . . . . 3231 mm (127 in)
Features
• Fuel efficiency rated at 45% of heat generated to work vs. standard 30% . . .
as low as 187 g/bkW-hour (0.307 lb/bhp-hour)
Benefits
• Long life design — 40,000 hours for major overhauls and 20,000 hours
between minor overhauls with No. #2 fuel
• Low cost and flexible platforms for cost-effective customer applications
Abbreviations used:
TA..................Turbocharger/Aftercooled
26 I N D U S T R I A L E N G I N E
G3400 G A S E N G I N E S
G3408
Specifications
G3406 (TA) G3408 (TA)
Bore x Stroke . . . . . 137 x 165 mm (5.4 x 6.5 in) . . . . . . 137 x 152 mm (5.4 x 6.0 in)
Displacement . . . . . 14 liters (893 cu. in.) . . . . . . . . . . . . 18 liters (1099 cu. in.)
Ship Weight . . . . . . 1362 kg (3000 lbs). . . . . . . . . . . . . . . 1680 kg (3700 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 1993 mm (79 in) . . . . . . . . . . . . . . . . 1594 mm (63 in)
Width . . . . . . . . . . . . . 1265 mm (50 in) . . . . . . . . . . . . . . . . 1471 mm (58 in)
Height . . . . . . . . . . . . 1433 mm (56 in) . . . . . . . . . . . . . . . . 1509 mm (59 in)
G3412 (TA)
Bore x Stroke . . . . . 137 x 152 mm (5.4 x 6.0 in)
Displacement . . . . . 27 liters (1649 cu. in.)
Ship Weight . . . . . . . 2143 kg (4720 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 2049 mm (81 in)
Width . . . . . . . . . . . . . 1603 mm (63 in)
Height . . . . . . . . . . . . 1734 mm (68 in)
Features
• Over 5 decades experience leveraging Caterpillar quality engineering and
manufacturing of gas and diesel powered engines
• Fuel flexibility
• Open-chamber design
Benefits
• Natural, field, landfill, and propane gas can all be burned efficiently
• Meets latest worldwide emissions requirements
• Caterpillar engineered design expertise has been applied
• Open-chamber design keeps the air-fuel mixture lean and increases power
while minimizing NOx
• Naturally aspirated, turbocharged, and aftercooled options allow you to
match emissions and dependability requirements to your specific needs
R AT I N G S G U I D E 27
G3500 G A S ENGINES
G3512
Specifications
G3508 (TA) G3512 (TA)
Bore x Stroke . . . . . 170 x 190 mm (6.7 x 7.5 in) . . . . . . 170 x 190 mm (6.7 x 7.5 in)
Displacement . . . . . 34.5 liters (2105 cu. in.) . . . . . . . . . 51.8 liters (3158 cu. in.)
Ship Weight . . . . . . 5425 kg (11 950 lbs) . . . . . . . . . . . . . 6560 kg (14 450 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 2247 mm (89 in) . . . . . . . . . . . . . . . . 2788 mm (110 in)
Width . . . . . . . . . . . . . 1733 mm (68 in) . . . . . . . . . . . . . . . . 1703 mm (67 in)
Height . . . . . . . . . . . . 1867 mm (74 in) . . . . . . . . . . . . . . . . 1863 mm (73 in)
G3516 (TA)
Bore x Stroke . . . . . 170 x 190 mm (6.7 x 7.5 in)
Displacement . . . . . 69.0 liters (4211 cu. in.)
Ship Weight . . . . . . 7931 kg (17 470 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 3327 mm (131 in)
Width . . . . . . . . . . . . . 1703 mm (67 in)
Height . . . . . . . . . . . . 1859 mm (73 in)
Features
• Over 5 decades experience leveraging Caterpillar quality engineering and
manufacturing of gas and diesel powered engines
• Fuel flexibility
• Open-chamber design
Benefits
• Natural, field, landfill, and propane gas can all be burned efficiently
• Meets latest worldwide emissions requirements
• Open-chamber design keeps the air-fuel mixture lean and increases power
while minimizing NOx
• Naturally aspirated, turbocharged, and aftercooled options allow you to
match emissions and dependability requirements to your specific needs
28 I N D U S T R I A L E N G I N E
G3600 G A S ENGINES
G3612
Specifications (Petroleum)
G3606 (TA) G3608 (TA)
Bore x Stroke . . . . . 300 x 300 mm (11.8 x 11.8 in) . . . . 300 x 300 mm (11.8 x 11.8 in)
Displacement . . . . . 127.2 liters (37 762 cu. in.). . . . . . . 169.6 liters (10 350 cu. in.)
Ship Weight . . . . . . 15 640 kg (34 560 lbs) . . . . . . . . . . . 19 000 kg (41 888 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 4638 mm (183 in) . . . . . . . . . . . . . . . 5465 mm (215 in)
Width . . . . . . . . . . . . . 1744 mm (69 in) . . . . . . . . . . . . . . . . 1868 mm (74 in)
Height . . . . . . . . . . . . 2921 mm (115 in) . . . . . . . . . . . . . . . 2922 mm (115 in)
Low Emissions
3
Features
• Over 5 decades experience leveraging Caterpillar quality engineering and
manufacturing of gas and diesel powered engines
• Fuel flexibility
• State-of-the-art electronically controlled pre-chamber design
Benefits
• Natural, field, landfill, and propane gas can all be burned efficiently
• Meets latest worldwide emissions standards
• Cat engineered design expertise has been applied
• Electronically controlled pre-chamber design allows you to obtain NOx
levels as low as 0.5 gr/bhp-hr
• Naturally aspirated, turbocharged, and aftercooled options allow you to
match emissions and dependability requirements to your specific needs
Abbreviations used:
TA..................Turbocharger/Aftercooled
R AT I N G S G U I D E 29
Fire Pump E N G I N E S 2, 3
3126
Fire Pump Engine
Abbreviations used:
JWAC ...........Jacket Water Aftercooled
T ....................Turbocharged
TA..................Turbocharged/Aftercooled
* FM/UL Certified
30 I N D U S T R I A L E N G I N E
Underground Mining
3406E
Specifications
3406E
Bore x Stroke . . . . . 137 x 165 mm (5 x 7 in)
Displacement . . . . . 15 liters (893 cu. in.)
Ship Weight . . . . . . 1356 kg (2990 lbs)
Approximate Dimensions:
Length . . . . . . . . . . . . 1661 mm (65 in)
Width . . . . . . . . . . . . . 901 mm (36 in)
Height . . . . . . . . . . . . 1336 mm (53 in)
Features
• In-line, six cylinder diesel engine
• Heat-treated crankshaft with high fatigue strength regrounds up to
3 times
• Chrome-plated stems guard against seizure
• Direct injection fuel system
• MSHA certified
Benefits
• Hard-faced intake and exhaust valves resist wear at high heat
• High strength-to-weight ratio
• Steel spacer between head and block eliminates need for liner
counterbores, enhancing strength and fatigue life of the block
• Valves rotate 3 degrees each lift, assuring good seating and uniform
temperature distribution
• Durable for heavy-duty applications
Electronically controlled/governed
1
Abbreviations used:
ATAAC ..........Turbocharged and Air-to-Air Aftercooled
E ....................Electronic
R AT I N G S G U I D E 31
Technology
ADEM:A4
• Electronic engine control system
• Precise fuel control
• Smarter controller
• Password protected
• Customized engine speed
• Controls idle levels
• Precise injection timing
Analog Gage
• 12- and 24-volt systems
• Liquid Crystal Display: engine
hours/diagnostic codes
• 2 LED indicators
• 2- or 3-inch diameter dial
• Thread nut mount installed
• Integral 6-pin Deutsch connector
• Displays engine speed, fuel rate, load
percent, pressures, and temperatures
Cat Messenger
• Electronic display unit
• Full graphic LCD screen
• Engine status and diagnostic display
in one
• Four easy scroll buttons
• Monitors engine problems
• Alerts driver of corrective action
• Schedules engine for service
• Provides diagnostic information, SAE
standard codes, and brief text
explanation
32 I N D U S T R I A L E N G I N E
Caterpillar.
Your Local Resource.
Worldwide.
Your Cat dealer is prepared to answer any questions you
may have about Cat Power Systems, customer support,
parts or service capability anywhere in the world. For the
name and number of the Cat dealer nearest you, call
Caterpillar Inc. World Headquarters in Peoria, Illinois,
U.S.A., or the subsidiary office in your corner of the world.
E-mail: CAT_Power@Cat.com
www.cat-industrial.com