Beruflich Dokumente
Kultur Dokumente
Project Name
Tarbela 500kV PROTECTIVE RELAY TEST REPORT ICB-102
Switchyard
RELAY DATA
Panel Description: Sync Check
Main VT:288.0Kv/115.0v
Date: 5/4/2018
PT ratio
CBP131 P94V
Relay: C/S VT:288.0Kv/115.0v
- B8Q1 Protection
Make ALSTOM
Model No. P94VP16A7C0560A/088095X Frequency 50Hz
1. 前期检查 Pre-test
1).屏柜外观检查 Panel Appearance Check 检查结果 Result
a.保护装置外观清洁良好,无损坏及变形。
OK
Appearance of relays is good, no breakage or distortion.
b.装置外部接线和标注符合图纸的要求。
OK
Device connection and labels accord with the drawings.
c.装置的额定频率、交流电压和电流,辅助工作电压和光隔工作电压与实际应用相符。
OK
Device connection and labels accord with the drawings.
2).上电检查 Electrical Inspection 检查结果 Result
a.检查直流回路接线正确。
OK
Check the connection of DC circuit.
b.将直流电压缓慢上升至额定电压,检查各装置的启动情况。
OK
Slowly increase the voltage to the rated value and check devices' start duration.
c.检查看门狗接点的动作情况。
OK
Check the operation of devices' watchdog output relay.
相关出口及连片 Relevant
项目 Item 动作要求 Requirement 实际动作 Operation 结论 Result
output and linker
Input 1: Spare OK / PASS
TEST DATA
4, Sync Check PROTECTION FUNCTION TEST
Relay Setting: Live Voltage:230.4 kV Under Volatge:215.4 Kv
Dead Voltage: 28.8 kV Over Volatge:330.6 Kv
CS1 Phase Angle 15.00 deg V Diff: 25.04 kV
CS1 Slip Freq 200.0 mHz
Voltage injected
Bus Side 115v <0° Line Side 106v <0°
Remarks Set the line amplitude with 20 magitude difference and decrease step wise
Phase Angle
Bay8Q1
Bus Side 115v <0° Line Side 115v < 12°
Remarks Set the angle of line at 15 degree and decrease it step wise.
DEAD LINE AND LIVE BUS OK LIVE LINE AND DEAD BUS OK
Time Test 115v <0° 115v <0° 1.08s
Blocking:OK LED: OK Dead Line Dead Bus-Block
相关出口及连片 Relevant
项目 Item 动作要求 Requirement 实际动作 Operation 结论 Result
output and linker
装置屏幕及对应出口响应
Sync Check Protection LCD and relevant output operate OK / PASSED
correctly