Beruflich Dokumente
Kultur Dokumente
Note: Basic engines and reman engines are generic engines. The engines are complete internally; however, externally all parts are not
supplied with the engines. Check the configuration of the engine being removed, with the configuration of the engine being installed.
For any external components not supplied with the engine being installed, reuse those parts from the engine that has just been
removed. Do not return the old engine, until the unit is reassembled.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
02-23(01) CYLINDER BLOCK - ENGINE BLOCK HEATERS - REPAIR KIT - BSN JJC0255700
Note: Basic engines and reman engines are generic engines. The engines are complete internally; however, externally all parts are not
supplied with the engines. Check the configuration of the engine being removed, with the configuration of the engine being installed.
For any external components not supplied with the engine being installed, reuse those parts from the engine that has just been
removed. Do not return the old engine, until the unit is reassembled.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
02-23(01) CYLINDER BLOCK - ENGINE BLOCK HEATERS - REPAIR KIT - BSN JJC0255700
Note: Basic engines and reman engines are generic engines. The engines are complete internally; however, externally all parts are not
supplied with the engines. Check the configuration of the engine being removed, with the configuration of the engine being installed.
For any external components not supplied with the engine being installed, reuse those parts from the engine that has just been
removed. Do not return the old engine, until the unit is reassembled.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
02-23(02) CYLINDER BLOCK - ENGINE BLOCK HEATERS - ASN JJC0255700
Note: Basic engines and reman engines are generic engines. The engines are complete internally; however, externally all parts are not
supplied with the engines. Check the configuration of the engine being removed, with the configuration of the engine being installed.
For any external components not supplied with the engine being installed, reuse those parts from the engine that has just been
removed. Do not return the old engine, until the unit is reassembled.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
02-23(02) CYLINDER BLOCK - ENGINE BLOCK HEATERS - ASN JJC0255700
Note: Basic engines and reman engines are generic engines. The engines are complete internally; however, externally all parts are not
supplied with the engines. Check the configuration of the engine being removed, with the configuration of the engine being installed.
For any external components not supplied with the engine being installed, reuse those parts from the engine that has just been
removed. Do not return the old engine, until the unit is reassembled.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
02-23(02) CYLINDER BLOCK - ENGINE BLOCK HEATERS - ASN JJC0255700
Note: Basic engines and reman engines are generic engines. The engines are complete internally; however, externally all parts are not
supplied with the engines. Check the configuration of the engine being removed, with the configuration of the engine being installed.
For any external components not supplied with the engine being installed, reuse those parts from the engine that has just been
removed. Do not return the old engine, until the unit is reassembled.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
02-23(03) CRANKCASE BREATHER - BTW JJC0255700 & JJC02560341
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
02-23(03) CRANKCASE BREATHER - BTW JJC0255700 & JJC02560341
Note: Circuit breakers, Refs. 13 - 15, are located in cab headliner upper relay block on 276603A2 harness only.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
04-08 HARNESS - CAB, OVERHEAD
Note: Circuit breakers, Refs. 13 - 15, are located in cab headliner upper relay block on 276603A2 harness only.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
04-08 HARNESS - CAB, OVERHEAD
Note: Circuit breakers, Refs. 13 - 15, are located in cab headliner upper relay block on 276603A2 harness only.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
04-09 RADIO
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
04-09 RADIO
Ref 33 - Note: Order to use with add-on radios, phones, and other accessories.
Ref 37 - 39 - Note: These connectors, 277424A1 and
277431A1 are located behind Refs 6 and 7 on page 9G-3. If broken or loose cab power may be lost and emergency parking brake will
engage. Purchase 311906A1 kit to repair.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
04-10 HARNESS - CAB, LOWER REAR - BSN JJC0252949
Ref 33 - Note: Order to use with add-on radios, phones, and other accessories.
Ref 37 - 39 - Note: These connectors, 277424A1 and
277431A1 are located behind Refs 6 and 7 on page 9G-3. If broken or loose cab power may be lost and emergency parking brake will
engage. Purchase 311906A1 kit to repair.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
04-11 HARNESS - CAB, LOWER REAR - ASN JJC0252949
Ref 33 - Note (1) : Order to use with add-on radios, phones, and other accessories.
Ref 37 - 39 - Note (2) : These connectors,
277424A1 and 277431A1 are located behind Refs 6 and 7 on page 9G-3. If broken or loose cab power may be lost and emergency
parking brake will engage. Purchase 311906A1 kit to repair.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
04-11 HARNESS - CAB, LOWER REAR - ASN JJC0252949
Ref 33 - Note (1) : Order to use with add-on radios, phones, and other accessories.
Ref 37 - 39 - Note (2) : These connectors,
277424A1 and 277431A1 are located behind Refs 6 and 7 on page 9G-3. If broken or loose cab power may be lost and emergency
parking brake will engage. Purchase 311906A1 kit to repair.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
04-12 HARNESS - CAB, RELAY AND FUSE
When replacing D137240 switch with 333268A1 switch, and not replacing D137431 harness with H436121 harness, rework the harness
by replacing the plastic receptacle with two 223-59 No. 8 eyelet terminals .
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
04-12 HARNESS - CAB, RELAY AND FUSE
When replacing D137240 switch with 333268A1 switch, and not replacing D137431 harness with H436121 harness, rework the harness
by replacing the plastic receptacle with two 223-59 No. 8 eyelet terminals .
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
04-13 CAB - TEMPERATURE, AUTO - BSN JJC0252949
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
04-13 CAB - TEMPERATURE, AUTO - BSN JJC0252949
Note: Motors do not Inc. pressure tubes as shown in the illustration. See Figure 5-21 for pressure tubes.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
05-16 HYDRAULICS - MOTOR, DRIVE - POWER GUIDE AXLE
Note: Motors do not Inc. pressure tubes as shown in the illustration. See Figure 5-21 for pressure tubes.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
05-17 HYDRAULICS - WHEEL MOTOR FLUSH - POWER GUIDE AXLE
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
05-17 HYDRAULICS - WHEEL MOTOR FLUSH - POWER GUIDE AXLE
Note: Do not use weights and brackets on a combine equipped with a Power Guide Axle.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
05-28(01) AXLE, STEERING - WEIGHTS (10 WEIGHTS) - BSN JJC0253999
Note: Do not use weights and brackets on a combine equipped with a Power Guide Axle.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
05-28(02) AXLE, STEERING - WEIGHTS (16 WEIGHTS) WITHOUT HITCH, ASN JJC0254000
Note: Do not use weights and brackets on a combine equipped with a Power Guide Axle.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
05-28(02) AXLE, STEERING - WEIGHTS (16 WEIGHTS) WITHOUT HITCH, ASN JJC0254000
Note: Do not use weights and brackets on a combine equipped with a Power Guide Axle.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
05-29 HITCH, TRAILER - BSN JJC0255700
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
05-29 HITCH, TRAILER - BSN JJC0255700
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
06-10 PUMP ASSY - HYDROSTATIC - CORN AND GRAIN COMBINE ASN JJC0254033 - RICE COMBINE ASN JJC0254130
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
06-10 PUMP ASSY - HYDROSTATIC - CORN AND GRAIN COMBINE ASN JJC0254033 - RICE COMBINE ASN JJC0254130
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
06-10 PUMP ASSY - HYDROSTATIC - CORN AND GRAIN COMBINE ASN JJC0254033 - RICE COMBINE ASN JJC0254130
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
06-11 PUMP ASSY - HYDROSTATIC - CONTROL VALVE
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
06-11 PUMP ASSY - HYDROSTATIC - CONTROL VALVE
Note: See Hydraulics - Feeder Clutch, Figure 8-26, for a continuation of hydraulic lines at the valve.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
07-05 HYDRAULICS - BRAKE, PARKING AND TOW VALVE
Note: See Hydraulics - Feeder Clutch, Figure 8-26, for a continuation of hydraulic lines at the valve.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
08-01 RESERVOIR - OIL, HYDRAULIC
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
08-01 RESERVOIR - OIL, HYDRAULIC
Note: Items 35 - 41 are part of the gearbox assembly. See page 6-1.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
08-11 PUMP, AUXILIARY - MOUNTING AND DRIVE
Note: Items 35 - 41 are part of the gearbox assembly. See page 6-1.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
08-11 PUMP, AUXILIARY - MOUNTING AND DRIVE
Note: Items 35 - 41 are part of the gearbox assembly. See page 6-1.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
08-12 HYDRAULICS - HEADER LIFT VALVE SUPPLY
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
08-12 HYDRAULICS - HEADER LIFT VALVE SUPPLY
Note: See parking brake hydraulic system, page 7-05, for the common supply and return lines used with the feeder clutch system.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
08-26 HYDRAULICS - FEEDER CLUTCH
Note: See parking brake hydraulic system, page 7-05, for the common supply and return lines used with the feeder clutch system.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
08-27 HYDRAULICS - SEPARATOR CLUTCH - BSN JJC0253999
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
08-27 HYDRAULICS - SEPARATOR CLUTCH - BSN JJC0253999
Note: To reduce the cleaning system speed on models prior to P.I.N. JJC0184544, order 303187A1 kit above.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09A-01 BELT DRIVE - JACKSHAFT, FAN
Note: To reduce the cleaning system speed on models prior to P.I.N. JJC0184544, order 303187A1 kit above.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09A-02 BELT DRIVE - RIGHT HAND SIDE
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09A-02 BELT DRIVE - RIGHT HAND SIDE
Note: Recommended for dusty conditions when rotor belt slippage occurs. Mounts to the cylinder block.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09B-02 ROTOR DRIVE - PULLEY AND CAM
Note: Recommended for dusty conditions when rotor belt slippage occurs. Mounts to the cylinder block.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09B-03 ROTOR DRIVE - SPEED ADJUSTMENT
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09B-03 ROTOR DRIVE - SPEED ADJUSTMENT
Note: To reduce the cleaning system speed on models prior to P.I.N. JJC0184544, order 303187A1 kit above.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09C-06 CLEANING FAN - DRIVE
Note: To reduce the cleaning system speed on models prior to P.I.N. JJC0184544, order 303187A1 kit above.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09C-06 CLEANING FAN - DRIVE
Note: To reduce the cleaning system speed on models prior to P.I.N. JJC0184544, order 303187A1 kit above.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09C-07 CLEANING FAN - DRIVE SPEED CONTROL
Note: To reduce the cleaning system speed on models prior to P.I.N. JJC0184544, order 303187A1 kit above.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09C-07 CLEANING FAN - DRIVE SPEED CONTROL
Note: To reduce the cleaning system speed on models prior to P.I.N. JJC0184544, order 303187A1 kit above.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09C-07 CLEANING FAN - DRIVE SPEED CONTROL
Note: To reduce the cleaning system speed on models prior to P.I.N. JJC0184544, order 303187A1 kit above.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09C-08 SHIELD, FAN INLET - DOOR - RIGHT HAND
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09C-08 SHIELD, FAN INLET - DOOR - RIGHT HAND
Note: To reduce the cleaning system speed on models prior to P.I.N. JJC0184544, order 303187A1 kit.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09D-07 GRAIN ELEVATOR DRIVE
Note: To reduce the cleaning system speed on models prior to P.I.N. JJC0184544, order 303187A1 kit.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09D-07 GRAIN ELEVATOR DRIVE
Note: To reduce the cleaning system speed on models prior to P.I.N. JJC0184544, order 303187A1 kit.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09D-08 AUGER ASSEMBLY - TAILINGS DELIVERY
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09D-08 AUGER ASSEMBLY - TAILINGS DELIVERY
Note: To reduce the cleaning system speed on models prior to P.I.N. JJC0184544, order 303187A1 kit.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09D-15 TAILINGS - ELEVATOR DRIVE
Note: To reduce the cleaning system speed on models prior to P.I.N. JJC0184544, order 303187A1 kit.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09D-16 ELEVATOR - JACKSHAFT, DRIVE
Note: To reduce the cleaning system speed on models prior to P.I.N. JJC0184544, order 303187A1 kit above.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09D-16 ELEVATOR - JACKSHAFT, DRIVE
Note: To reduce the cleaning system speed on models prior to P.I.N. JJC0184544, order 303187A1 kit above.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09D-16 ELEVATOR - JACKSHAFT, DRIVE
Note: To reduce the cleaning system speed on models prior to P.I.N. JJC0184544, order 303187A1 kit above.
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09D-17 TAILINGS - SUPPORTS AND DRIVE SHIELD
2366 CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04)
09D-17 TAILINGS - SUPPORTS AND DRIVE SHIELD