Sie sind auf Seite 1von 60

Mobile Units

Possible Mobile set- up

Sandvik Mining and Construction


Another possibility

Sandvik Mining and Construction


Yet another possibility

Sandvik Mining and Construction


Mobile Range

Mobile unit series:

440i units Crawler mounted – diesel hydraulic


440E-640 units Crawler mounted – diesel electric
420 units Wheel mounted – electric (top tech)
320 units Wheel mounted – electric (top tech)

210-310 units Wheel mounted - electric (base tech)

Sandvik Mining and Construction


Sandvik UJ440i & UH440i

Sandvik Mining and Construction


Sandvik UJ440i & UH440i
•Top quality
equipment.

Sandvik CJ412 Jaw crusher Sandvik Feeder

Sandvik Conveyor

Sandvik Rubber Sandvik Chassis

Sandvik CH440 cone crusher Sandvik Conveyor


Alt. Sandvik CS440

Hopper
Sandvik Conveyor

Sandvik Chassis
Sandvik Rubber

Sandvik Mining and Construction


Sandvik UJ440i & UH440i
•Top quality
equipment.

UJ
UH 440i
440i

Sandvik Mining and Construction


Sandvik UJ440i & UH440i
•Top quality
equipment.

UH 440i

Sandvik Mining and Construction


Sandvik UJ440i
•Operating
practice COMFORT
-for clean rock

CLASSIC
-for rock and gravel

TREND
-for unclean rock and gravel
with much fine material

Sandvik Mining and Construction


Sandvik UH440i
•Operating practise
UH440i

Sandvik Mining and Construction


Sandvik UJ440i
• Specification

Dimensions Comfort & Classic Trend


Operation
Height 4.25m / 167” 4.90m / 193”
Width 3.13m / 123” 3.58m / 141”
Length 16.37m / 54’ 17.90m / 59’

Transport
Height 3.91m / 150” 4.09m / 161”
Width 3.00m / 118” 3.39m / 141”
Length 16.43m / 54’ 18.00m / 59’

Weight1 Comfort Classic Trend


tons 62 63 70
short tons 68 69 77

Sandvik Mining and Construction


Sandvik UJ440i
•Specification

Feed station Comfort Classic Trend


Feeder type SW1252 SW1252 ST1241
Grizzly length 1.2m / 4’ 1.2m / 4’ -
Hopper 6 m3 / 6 m3 / 10 m3 /
210 ft3 210 ft3 350 ft3
Screen type - SS1013H ST1222
Decks - 2 2 (stepped grizzly on top)

Crusher
Type CJ412
Feed opening 1200x800mm / 48x32”
Drive From diesel engine via V-belts and hydraulic coupling
.
Discharge conveyor
Belt width 1400mm / 52”
Drive Hydraulic motors with fixed speed
Approx. Discharge
height under drum 3.3-3.8m 10’10” +/- 10”

Sandvik Mining and Construction


Sandvik UJ440i
•Specification

On-board power pack


Diesel engine Volvo TAD 1252 tier III
Rated output 313kW / 425hp at 1800rpm
Fuel tank volume 1125dm3 / 300 US gallons

Hydraulic system
Power source Pumps mounted on power pack.
Oil tank volume 350dm3 / 250 US Gallons

Sandvik Mining and Construction


Sandvik UH440i/US440i
•Specification

Dimensions UH440i US440i


Operation
Height 4.90m / 193” 4,94m / 155”
Width 3.00m / 118” 3.00m / 118”
Length 18,80m / 74’ 18,80m / 74’

Transport
Height 3.92m / 154” 3,94m / 155”
Width 3.00m / 118” 3.00m / 118”
Length 18,80m / 62’ 18.80m / 62’

Weight1 Comfort US440i


tons 47 53
short tons 52 58

Sandvik Mining and Construction


Sandvik UJ440i/US440i
•Specification
Feed Conveyor
Belt width 1400mm / 52”
Drive Hydraulic motors with automatically adjusted
speed to maintain material level in the crusher

Crusher
Type CH440/CS440
Drive From diesel engine via V-belts
and hydraulic coupling.

Discharge conveyor
Belt width 1400mm / 52”
Drive Hydraulic motors with fixed speed
Approx. Discharge
height under drum 3.3-3.8m 10’10” +/- 10”

Sandvik Mining and Construction


Sandvik UH440i/US440i
•Specification

On-board power pack


Diesel engine Volvo TAD 1252 tier III
Rated output 313kW / 425hp at 1800rpm
Fuel tank volume 1125dm3 / 300 US gallons

Hydraulic system
Power source Pumps mounted on power pack.
Oil tank volume 350dm3 / 250 US Gallons

Sandvik Mining and Construction


EPEC HMI-module

z Technical data
Metal enclosed IP67
Temperature -10 / +45 C (OP)
Monocron VGA LCD display
5 soft keys
2 CanBus interface
1 RS232 interface
8Mb Flash memory

Sandvik Mining and Construction


Sandvik UJ440i & UH440i
•Process automation and interlocking.
-Intelligence
-Can bus system built for automotive industry. Dust- temp- and shock proof.
-Process control and Fault tracing
-ASRi (UH440i only)
-”Wire less” communication
Self adjusted speed on the feeder and on the feed conveyor

Sensors
Sensors

Sandvik Mining and Construction


UJ 440i,UH 440i & US 440i
NEW
Closed or open circuit

Sandvik Mining and Construction


HS-module NEW

z Superfast to connect to standard UJ440i unit


z Intelligence included
z New 1530 single deck screen
z Sandvik Crosscord media as standard
z 2 fractions out
z Drop height product conveyors: 3m
z HS-module Open Circuit fits UJ440i and UH440i
z HS-module Closed Circuit fits UH440i

Sandvik Mining and Construction


Sandvik UJ440i & UH440i
•Fast set up and take off
-Transport in one unit -Super fast to put in production
-Everything stays on board -Easy to move in pit
-Compact size

Sandvik Mining and Construction


Why Sandvik UJ440I, UH440i
and US440i?

z Can be used under any climatic z Quick set-up and close-down


conditions thanks to one piece road
–thanks to a careful selection of transportation and hydraulically
quality components. foldable feed conveyor.
z Advanced process automation z Easy inspection and
through sensor monitoring and maintenance thanks to roomy
interlocking. construction and easily accessible
z Easy to move back and forth into maintenance items. Detailed
position for blasting thanks to manuals offer clear and simple
crawler tracks, radio remote control directions.
and no equipment dismantling. z Economical operation that
requires one operator for both the
loader and crushing unit.

Sandvik Mining and Construction


Why Sandvik UJ440I, UH440i
and US440i?

z Good working environment z Quick return on investment


thanks to reduced dust, noise and thanks to low operating cost and
emissions. high productivity.
Dust sealed product discharge z No spillage of hydraulic oil during
conveyor. filter changes thanks to the
z Powerful and economical thanks vacuumized system.
to a modern, on board diesel engine z Staff training and commissioning
with low fuel consumption and under the supervision of Sandvik is
minimum transmission losses. included in the delivery.
Emissions according to EU and
USA Tier III norms.

Sandvik Mining and Construction


Mobile Range

Mobile unit series:

440i units Crawler mounted – diesel hydraulic


440E-640 units Crawler mounted – diesel electric
420 units Wheel mounted – electric (top tech)
320 units Wheel mounted – electric (top tech)

210-310 units Wheel mounted - electric (base tech)

Sandvik Mining and Construction


Sandvik UJ440E
NEW

Sandvik Mining and Construction


Why Sandvik UJ440E?
”because:”

z Secure and reliability control z Professional staff training and


system commissioning
-thanks to Can bus system built for -of the unit is
automotive industry. Dust- temp- and included in the delivery.
shock proof z Good working environment
z Secure and reliability process –thanks to reduced dust, noise and
control emissions.
-thanks to advanced process Dust sealed product discharge
automation through sensor monitoring conveyor.
and interlocking z Minimizes environmental impact
-due to the fact that it operates
by electricity

Sandvik Mining and Construction


Why Sandvik UJ440E?
”-and because of:”

z Easy inspection and maintenance z Easy to move back and forth


–easily accessible and good clearance into position for blasting
for maintenance. –thanks to crawler tracks,
z Can be used under any climatic remote control and no equipment
conditions dismantling
–thanks to a careful selection of z Economical operation
quality components. –one operator is required for
z Quick set-up and close-down both the loader and crushing unit.
–unit can be transported as one z Quick return on investment
piece. Hydraulically foldable –thanks to low operating cost and
discharge conveyor high productivity.

”-of course!”

Sandvik Mining and Construction


Sandvik UJ440E
•Specification

Dimensions
Operation
Height 4.70m / 15.4’
Width 3.30m / 10.8’
Length 20.60m / 67.6’

Transport
Height 3.90m / 12.8’
Width 3.30m / 10.8’
Length 20,20m / 66.3’

Weight Part 1 Part 2


tons 67.5 3.8
short tons 73.5 4.4

Sandvik Mining and Construction


Sandvik UJ440E
•Specification

Feed station
Feeder type SW1253H
Grizzly length 1.2m / 4’
Hopper 8 m3 / 295 ft3

Crusher
Type CJ412
Feed opening 1200x800mm / 48x32”
Drive From electric motor, 132kW, 50Hz, squirrel cage type.
.

Discharge conveyor
Belt width 1400mm / 56”
Drive 2 x 11,0 kW electric motors
Approx. Discharge
height under drum 4.0m / 13.1’

Sandvik Mining and Construction


Sandvik UJ440E
•Specification

On-board power pack


Alt.1
Diesel engine Volvo TAD 1241
Rated output 375kW
Generator Stamford
Alt.2
Diesel engine CAT 3406C
Rated output 365kW
Generator Stamford

Fuel tank volume 2400 dm3 / 635 US gallons

Tracks
Length c/c 4040 mm / 13’4”
Track shoe width 500mm / 20”
Hydraulic pumps driven by 2 x 75 kW electric motors

Sandvik Mining and Construction


Sandvik UJ540

Sandvik Mining and Construction


Sandvik UJ540
•Diesel-electric on board power supply.
•Compact size:
W=3.5m L=19.8m H=5.8m
•Weight= 106mtons
•SW1252H Grizzly feeder (10m3)
with two grizzly sections.
•SS1012 (2d) NF screen with
650mmx8m conveyor.
•Sandvik CJ612 crusher with
Automatic CSS setting with wedges
and automatic lubrication as option.
•1400mm wide product conveyor.
Disharge height: 4100mm
•CAT 365kVA genset
•2400dm3 diesel tank.
•Hydraulic hammer set as option

Sandvik Mining and Construction


Sandvik UJ540 Transport

Sandvik Mining and Construction


Sandvik UJ640

Sandvik Mining and Construction


Sandvik UJ640

•Diesel-electric self supporting


•Compact size:
W= 4.8m L=20.5m H=6.58m
•Weight: 130 mtons
•Hopper volume 14m3
•Feeder SW1453
Stepped grizzly 2 x 900 mm
•Sandvik CJ615 crusher
•Semi automatic CSS
setting as option.
•1600mm wide discharge
conveyor (extra wear resistant).
•CAT 455 kVA Genset (onboard)
•CAT tracks
•2400 dm3 diesel tank.
•Radio remote control
•Automatic lubrication system for the crusher.

Sandvik Mining and Construction


Sandvik UJ640 Transport

Sandvik Mining and Construction


Sandvik UH640

Sandvik Mining and Construction


Sandvik UH640

•SP1020H Feeder
•NF screen SS1013H (1000x1200mm)

•CH660 crusher

•SS1833 3D screen (1800x1200mm)

•Closed circuit + 2 products out.

•Diesel electric

•Volvo diesel / Stamford gen. (650 kVA)

•Total weight: 84 mtons

Sandvik Mining and Construction


Mobile Range

Mobile unit series:

440i units Crawler mounted – diesel hydraulic


440E-640 units Crawler mounted – diesel electric
420 units Wheel mounted – electric (top tech)
320 units Wheel mounted – electric (top tech)

210-310 units Wheel mounted - electric (base tech)

Sandvik Mining and Construction


Sandvik UH421

Sandvik Mining and Construction


Sandvik UH421

•Strong and well known cone crusher CH440.


•Advanced process automation by interlocking and ASRi.
•Separate NF screen with conveyor.
•Tippable static grizzly bar via remote control
•Dust sealed conveyors and screens with self cleaning dust collector.
•Effective and accurate product screen.
•3 products.
•3 axle air suspension bogie with ABS brakes.
•Compact transport size: width:2998mm, length 18640mm, height: 4250mm.
•Transport in one unit.

Sandvik Mining and Construction


Sandvik UH421

•A complete turn-key crushing plant.


•Flexible welcome process alternatives.
•Primary-, secondary- & tertiary crushing stage.
•Environmental package (Anti pollution, -dust & -noise)
•Maximum power output.
•Compact! Less space is needed.
•High quality strong chassis. (FEM designed)
•Good clearance for maintenance.
•Easily operated from wheel loader via remote control.
•Fast set up and take off.
•Transport in one unit.
•Process automation and interlocking.
•High second hand value.
•Well proven in practice…

THE ORIGINAL
Sandvik Mining and Construction
Mobile Range

Mobile unit series:

440i units Crawler mounted – diesel hydraulic


440E-640 units Crawler mounted – diesel electric
420 units Wheel mounted – electric (top tech)
320 units Wheel mounted – electric (top tech)

210-310 units Wheel mounted - electric (base tech)

Sandvik Mining and Construction


Sandvik 320
Sandvik UF320

Sandvik UH320 Sandvik UV320

Sandvik Mining and Construction


Sandvik UF320

•Tertiary crushing & screening stage.


•Tippable static grizzly bar.
•Fast set up and take off.
•Transport in one unit.
•Hydraulically foldable conveyors.
•Sandvik Feeder SP0830
•Sandvik Free Classifier screen SF1843
• 3 quality fractions + 1 oversize fraction
• Optional genset

Sandvik Mining and Construction


Sandvik UV320

Sandvik Mining and Construction


Sandvik UH320

•Strong and well known Hydrocone crusher CH430.


•Advanced process automatation by interlocking and ASRi.
•Three-axle bogie.
•Compact transport size.
•4 screened fractions.
fractions
Alt.
Alt.
•3 fractions
•3 fractions ++ 11 circulating
circulating back
back to
to the
the
cone
cone crusher
crusher stand-alone
stand-alone conveyor.
conveyor.

Sandvik Mining and Construction


Sandvik UH320

Sandvik Mining and Construction


Sandvik UH320 & UV320
UH320
&
UV320
”FLEX”

Sandvik Mining and Construction


Sandvik UH320 & UV320
UH320
&
UV320
”FLEX”

Sandvik Mining and Construction


Mobile Range

Mobile unit series:

440i units Crawler mounted – diesel hydraulic


440E-640 units Crawler mounted – diesel electric
420 units Wheel mounted – electric (top tech)
320 units Wheel mounted – electric (top tech)

210-310 units Wheel mounted - electric (base tech)

Sandvik Mining and Construction


Wheel-mounted
Sandvik UJ210 Sandvik UJ310

Sandvik UH310 Sandvik HS310

Sandvik Mining and Construction


Sandvik UJ210

•Compact size: 12.6m x 3.9m x 4,9m


•Light weight: approx. 34 mtons.
•Total power needed: 91,6 kw
•Grizzly feeder 40090 from Roxon with adjustable grizzly section.
•Feed hopper volume: 15m3
•By-pass and NF chute.
•Sandvik CJ409 Jaw crusher.
•800mm wide product conveyor
•UJ210 is designed for producing up to 235 MTPH at 125mm (5”) CSS setting.

Sandvik Mining and Construction


Sandvik 310

•Compact size: 15m x 4,2m x 5m.


•Light weight: apptox. 50 mTons
•Needed Power: 134 kW
•Grizzly feeder from Roxon: GF410100 with adjustable grizzy opening.
•Feed Hopper volume:17m3
•By-pass chute and NF chute
•Sandvik CJ411 HD crusher
•Product conveyor: width 1000mm
•UJ310 is designed to produce 325 MTPH at 225mm CSS setting.

Sandvik Mining and Construction


Sandvik US310

•Total Weight: 33.3 MTons


•Total power: 180.5 kW
•Sandvik SC1852 circular motion screen. (1800mm x 4800mm)
•Sandvik CJ430 crusher (160kW)

Sandvik Mining and Construction


Sandvik UH310

•Total Weight: 31.3 MTons


•Total power: 152.5 kW
•Sandvik SC1853 circular motion screen. (1800mm x 4800mm)
•Sandvik CJ430 crusher (132kW)

Sandvik Mining and Construction


Sandvik UD210

•Complete primary and secondary crushing and screening unit, on board the same chassis.
•Compact transport size: 16m x 2.5m x 4m.
•Total weight basic unit 44.5 MTons
•MV-35080 Grizzly feeder. Feed hopper volume 12m3
•By-pass and NF chute.
•Sandvik CJ408 Jaw crusher.
•Loop belt conveyor width: 900mm
•BS 5’ x 12’ IIID ”Banana” shaped screen.
•Sandvik CH420 EC crusher.
•Up to four different fractions + NF •Capacity: up to 140MTPH
Sandvik Mining and Construction

Das könnte Ihnen auch gefallen