Beruflich Dokumente
Kultur Dokumente
Click on selected port and go to Ethernet property.and select uni port mode as a l2.and click on save.
EVERY SERVICE CREATION NEED THREE STEP.
1-TUNEEL
2-PW
3-L2VPN
Select source site and sink site and also fill forward label and reverse label
Click on finish.
Click on activate now.
Click on OK
Click on download .
2-PW- creation.
click on business configuration and choose PTN/IPRAN(R) and then select PW(P).
Select source node and sink node .
And then fill label according to tunnel.
Click on next.
Select the service layer of LSP. Then click on net till finish
Select yes.
4-E-LAN- (POINT TO MULTIPOINT SERVICE)
L2VPN- creation.
Go to business configuration(B) and select PTN/IPRAN(R) and choose L2VPN service
Fill service name means path name and service type- ELAN and then next.
Click next.
Select Pw and then click on next.
Select source site and then choose UNI interface setting and change
Cross-connected mode generated-then select VPLS.
Select sink site and then choose UNI interface setting and change
Cross-connected mode generated-then select VPLS.
And then enable split horizon
Select sink site and then choose NNI interface setting and change
And then enable split horizon
Then click on finish .
Click on activate.
Click on download .
Click on yes.
When add more ELAN_ then right click l2vpn and select modify and click on add
node .
Then select on other sink site and sink port.and then click on ok.
Select tunnel.
Select PW circuit and then click on next.
Select sink node and choose UNI Interface setting and
Select cross-connected mode generated-VPLS
Split horizoin-Enable.
Select NNI interface setting and then split horizon-disable.
Right click on tunnel and select deliver cross-connect of selected path.
Click on download
Click on yes.
Right click on protection and select the deliver the selected protection group
Click on download .
Click on yes.
Right click
Click on download.
Add 610 site port as E-LAN SERVICE
L2vpn-
Business Management(M)