Beruflich Dokumente
Kultur Dokumente
5
6
10
11
12
12.01
12.02
12.03
12.04
12.05
12.06
SECTION – B: LT BUSDUCTS, RAISNG MAINS AND TAP-OFF BOXES
All installation works should be as complete and as directed by Employer /
Empolyer's representative. The rate includes necessary connected minor civil works
if required and necessary supports as required at site. No extra payment will be
made for the same.
LT BUSDUCTS
Design, supply, erection, testing and commissioning of 2500 Amps 50kA indoor sandwich type
aluminium 4Pole busduct and with suitable support from ceiling as per the detailed specification
enclosed. The busduct shall have 2Rnus of external body earth conductor along full length of
busduct. The busduct should be with straight run, 90 deg. horizontal and Vertical bends.,
busbar trunking fittings (elbow, tees, end End (Cable) feed Box, end covers, horizontal fixing
devices,etc.) The horizontal runs of busbar trunking system shall be supported by hangers at
every 2 metre. Vertical runs of busbar trunking system shall be supported by hangers not more
than 4m apart. The busduct shall run from transfromer secondary to MDB/MPCC and DG synch.
panel to MDB/ MPCC panel. The bus duct shall be fabricated as per the detailed specification
enclosed.
Design, supply, erection, testing and commissioning of 2500 Amps 50kA outdoor sandwich
type aluminium 4Pole busduct and with suitable support from ceiling as per the detailed
specification enclosed. The busduct shall have 2Rnus of external body earth conductor along
full length of busduct. The busduct should be with straight run, 90 deg. horizontal and Vertical
bends., busbar trunking fittings (elbow, tees, end End (Cable) feed Box, end covers, horizontal
fixing devices,etc.) The horizontal runs of busbar trunking system shall be supported by
hangers at every 2 metre. Vertical runs of busbar trunking system shall be supported by
hangers not more than 4m apart. The busduct shall run from transfromer secondary to MDB/
MPCC. The bus duct shall be fabricated as per the detailed specification enclosed.
Design, supply, erection, testing and commissioning of 2000 Amps 50kA indoor sandwich type
aluminium 4Pole busduct and with suitable support from ceiling as per the detailed specification
enclosed. The busduct shall have 2Rnus of external body earth conductor along full length of
busduct. The busduct should be with straight run, 90 deg. horizontal and Vertical bends.,
busbar trunking fittings (elbow, tees, end End (Cable) feed Box, end covers, horizontal fixing
devices,etc.) The horizontal runs of busbar trunking system shall be supported by hangers at
every 2 metre. Vertical runs of busbar trunking system shall be supported by hangers not more
than 4m apart. The busduct shall run from MDB to End feed unit of rising main. The bus duct
shall be fabricated as per the detailed specification enclosed.
Design, supply, erection, testing and commissioning of 1600 Amps 50kA indoor sandwich type
aluminium 4Pole busduct and with suitable support from ceiling as per the detailed specification
enclosed. The busduct shall have 2Rnus of external body earth conductor along full length of
busduct. The busduct should be with straight run, 90 deg. horizontal and Vertical bends.,
busbar trunking fittings (elbow, tees, end End (Cable) feed Box, end covers, horizontal fixing
devices,etc.) The horizontal runs of busbar trunking system shall be supported by hangers at
every 2 metre. Vertical runs of busbar trunking system shall be supported by hangers not more
than 4m apart. The busduct shall run from MDB to APFCR panel. The bus duct shall be
fabricated as per the detailed specification enclosed.
Design, supply, erection, testing and commissioning of 2500 Amps flexible joints suitable for
sandwich type 4P aluminium bus duct at end terminals including all accessories.(RYB+N=1set)
Design, supply, erection, testing and commissioning of 2000 Amps flexible joints suitable for
sandwich type 4pole aluminium bus duct at end terminals including all accessories.(RYB+N=1
set)
Design, supply, erection, testing and commissioning of 1600 Amps flexible joints suitable for
sandwich type TPN aluminium bus duct at end terminals including all accessories.(RYB+N=1
set)
Design, supply, erection, testing and commissioning of 2000 Amps Phase cross changeover box
suitable for sandwich type 4pole aluminium bus duct including all accessories. (it will operate in
case of phase change over is required as per site condition) (RYB+N=1 set)
Design, supply, erection, testing and commissioning of 2500 Amps Phase cross changeover box
suitable for sandwich type 4pole aluminium bus duct including all accessories. (it will operate in
case of phase change over is required as per site condition) (RYB+N=1 set)
Design, supply, erection, testing and commissioning of 2000 Amps Phase cross changeover box
suitable for sandwich type TPN aluminium bus duct including all accessories. (it will operate in
case of phase change over is required as per site condition) (RYB+N=1 set)
Design, supply, erection, testing and commissioning of 1600 Amps Phase cross changeover box
suitable for sandwich type TPN aluminium bus duct including all accessories. (it will operate in
case of phase change over is required as per site condition) (RYB+N=1 set)
10 RMT
60 RMT
12 RMT
4 Sets
4 Sets
2 Sets
1 Sets
1 Sets
1 Sets
1 Sets
80 RMT
2 Nos
2 sets
2 Nos
55 Nos
18 Nos
2 Nos