Beruflich Dokumente
Kultur Dokumente
2
(xiii) Average pressure along section Z-Z(Kg/m ) ( 20282 + 9890 ) / 2 15086
( ( 15086 x (5.13 - 3.6) ^ 2 / 8) + ( (16938-15086) x (5.13 - 3.6) ^ 2 / 12) ) ) x 1
(xiv) Bending Moment about section Z-Z in N-mm /m
x 9.81 x 1000 ) 4.68E+07
Base pressure at 'd' distance from section Z-Z towards end of
base slab ( d = 282mm) 15086 + ( ((16938 - 15086) x 282 / 1000) / (5.13-3.6)/2 ) 15769
(xv) One-way shear at section Z-Z in Kg/m ( ( 16938 +15769) /2) * { (5.13 - 3.6 ) / 2 - 0.282 } 7899
Base pressure at 'd/2' distance from section Z-Z towards end
of base slab ( d = 141mm) 15086 + ( ((16938 - 15086) x 141 / 1000) / (5.13-3.6)/2 ) 15427
(xvi) Two-way shear at secion Z-Z in Kg ( ( 16938 +15427) /2) * ( ( 5.13 ^ 2 ) - ( 3.6 +0.282)^2 ) 182004
Area of Bars
No and Diameter of Bars to be used in Base Slab No of Bars required for base slab Diameter of Bar in mm 2
(Ast) in mm
Value of Xumax /d to be used in slab design Fy = 500 (Xumax / d) = 0.46 & For Fy = 415 (Xumax/d ) = 0.48
Effective Depth Required for slab (Dreqd) in mm Sqrt (3.417E+08/ (0.36 * 20 * 0.46*(1-(0.42*0.46)) * 2.52 * 1000) 225
Breadth at section -XX in 'm' = 2.52 Since (dreqd) < than (dactual), Slab depth is O.K
Moment of Resistance at Section - XX Mrx in N-mm (Mrx =0.87 *500 * Ast *832 * [1-(Ast *500 / 20 * 1000*832]
Total Reinforcement Ast required in mm2 = 10.875 Ast^2 - 361920 Ast + 3.417E+08 = 0
where Ast = Reinforcement Reqd. for moment Mrx/m Solving the above Quadratic equation for Ast We Get Ast = 972.55
Effective Depth Required for slab (Dreqd) in mm Sqrt (1.327E+08/ (0.36 * 20 * 0.46*(1-(0.42*0.46)) * 3.6 * 1000) 117
Breadth at section -YY in 'm' = 3.6 Since (dreqd) < than (dactual), Slab depth is O.K
Moment of Resistance at Section - YY Mry in N-mm/m (Mry =0.87 *500 * Ast *532 * [1-(Ast *500 / 20 * 5130*532]
Total Reinforcement Ast required in mm2 = 10.875 Ast^2 - 231420 Ast + 1.327E+08 = 0
where Ast = Reinforcement Reqd. for moment Mry Solving the above Quadratic equation for Ast We Get Ast = 589.74