Beruflich Dokumente
Kultur Dokumente
Goals
:
1. Create a new Setup.
Page 1 of 10
Define Stock and WCS
Instructions
: 1. Open the exercise file “Lesson 1 procedure 2.f3d”.
http://app.solidprofessor.com/weblms/html5/16intCAM_exercise_2/16in
tCAM_exercise_2.zip
Page 2 of 10
Define Stock and WCS
Instructions
(continued):
3. In the Work Coordinate System (WCS)
change the Orientation to ‘Select Z
axis/plane & X axis’.
Page 3 of 10
Define Stock and WCS
Instructions
(continued):
5. Click on the X axis ‘Button’ and then select the edge of the model.
Page 4 of 10
Define Stock and WCS
Instructions
(continued):
6. Change the Origin to 'Model origin'.
Page 5 of 10
Define Stock and WCS
Instructions
(continued):
8. Change the Stock 'Mode’ to
'Relative size' box.
Page 6 of 10
Define Stock and WCS
Instructions
(continued):
12. Select the Post Process tab.
Page 7 of 10
Define Stock and WCS
Instructions
(continued):
14. Change the ‘Operations’ name to ‘Lesson 1 Setup’.
Page 8 of 10
Define Stock and WCS
Self-Check:
Page 9 of 10
Define Stock and WCS
Self-Check:
Page 10 of 10