0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
22 Ansichten1 Seite
This document provides specifications for several asphalt and bitumen products including Pertamina Asphalt 60/70 N, Paving Asphalt 60/70 N, and Shell Bitumen 60/70. It lists parameters such as penetration, softening point, ductility, specific gravity, flash point, and solubility. The specifications are in accordance with standards from ASTM and other organizations and provide the measurement units and acceptable ranges for each parameter.
This document provides specifications for several asphalt and bitumen products including Pertamina Asphalt 60/70 N, Paving Asphalt 60/70 N, and Shell Bitumen 60/70. It lists parameters such as penetration, softening point, ductility, specific gravity, flash point, and solubility. The specifications are in accordance with standards from ASTM and other organizations and provide the measurement units and acceptable ranges for each parameter.
This document provides specifications for several asphalt and bitumen products including Pertamina Asphalt 60/70 N, Paving Asphalt 60/70 N, and Shell Bitumen 60/70. It lists parameters such as penetration, softening point, ductility, specific gravity, flash point, and solubility. The specifications are in accordance with standards from ASTM and other organizations and provide the measurement units and acceptable ranges for each parameter.
Product Description Parameter Unit Specification 60/70 N
Penetration at 25° C x 0.1 mm ASTM D 5 60-70
Softening Point °C ASTM D 36 48-58
Pertamina Asphalt is produced in Pertamina Ductility at 25° C, 5 cm/min (min) cm ASTM D 113 100 Refinery UP IV Cilacap from Asphallic type of Cure Oil in semisolid form, with characteristic Specific gravity - ASTM D 70 1 non metallic soluble in CS2 (carbon disulphide), Flash Point (min) °C ASTM D 92 200 water proofing and adhesive. Solubility in trichloroethylene (min) mass % ASTM D 2042 99
Loss on heating % ASTM D 6 0.4
Penetration at 25° C x 0.1 mm ASTM D 5 60-70
Softening Point °C ASTM D 36 47-54
Ductility at 15° C, 5 cm/min (min) cm ASTM D 113 100
Paving Asphalt 60/70 N is a penetration graded Ductility at 10° C, 5 cm/min (min) cm ASTM D 113 20 asphalt product derived from specially selected Dynamic viscosity at 60° C (min) Pa.s ASTM D 2171 180 crude oils via carefully controlled refining processes. Wax content (max) mass % DIN EN 12606-1 2 Specific gravity - ASTM D 70 1.01-1.05
Flash Point (min) °C ASTM D 92 260
Solubility in trichloroethylene (min) mass % ASTM D 2042 99.5
Penetration at 25° C x 0.1 mm ASTM D 5 60-70
Softening Point °C ASTM D 36 48 - 56 99.5
Shell Bitumen 60/70 is unlikely to present any Solubility in trichloroethylene (min) mass % ASTM D 2042 99.5 significant health or safety hazard when properly used in the recommended application, Ductility at 25° C, 5 cm/min (min) cm ASTM D 113 100 provided good standards of industrial and Loss on heating % ASTM D 6 0.2 personal hygiene are maintained. Drop in penetration after heating % ASTM D 5 20