100%(14)100% fanden dieses Dokument nützlich (14 Abstimmungen)
10K Ansichten18 Seiten
This document provides instructions for measuring the segregated portion of concrete. It defines segregated portion as the percentage of material passing through a 4.75 mm sieve. It provides the equation for calculating segregated portion based on the mass of material passing through the sieve and the initial mass of concrete placed on the sieve. The test report must include identification information, test details, ambient conditions, the segregated portion percentage, presence of bleed water, any deviations from the standard method, and a declaration that the test was performed according to the standard.
This document provides instructions for measuring the segregated portion of concrete. It defines segregated portion as the percentage of material passing through a 4.75 mm sieve. It provides the equation for calculating segregated portion based on the mass of material passing through the sieve and the initial mass of concrete placed on the sieve. The test report must include identification information, test details, ambient conditions, the segregated portion percentage, presence of bleed water, any deviations from the standard method, and a declaration that the test was performed according to the standard.
This document provides instructions for measuring the segregated portion of concrete. It defines segregated portion as the percentage of material passing through a 4.75 mm sieve. It provides the equation for calculating segregated portion based on the mass of material passing through the sieve and the initial mass of concrete placed on the sieve. The test report must include identification information, test details, ambient conditions, the segregated portion percentage, presence of bleed water, any deviations from the standard method, and a declaration that the test was performed according to the standard.
28 TEST RESULT a) Identification of the test sample;
The segregated portion SR is calculated from the b) Location where the test was performed; following equation and reported to the nearest c) Date and time of test; 1 percent. d) Ambient temperature; e) Segregated portion SR, to the nearest 1 percent; SR = f) Presence of bleed water, if any, after standing for 15 min; where g) Any deviation from the standard test method; SR = segregated portion in percent; h) Declaration by the person technically mps = mass of sieve receiver plus passed material, responsible for the test that it was carried out in g; in accordance with this standard, except as noted in (g). mp = mass of the sieve receiver, in g; and j) The report may include, mc = initial mass of concrete placed onto the sieve, in grams. 1) temperature of the concrete at the time of test; and 29 TEST REPORT 2) time between completion of mixing and The test report shall include the following: performance of the tests. 8 Chairman