Beruflich Dokumente
Kultur Dokumente
Simulation:
8. Go to File Export Export SPICE. Now minimize S-EDIT window and open T-
SPICE window. Click on UNBLOCK if Windows security alert is observed.
9. Go to File Open Browse and open the SPICE NETLIST file saved in your created
folder.
10. Select INSERT COMMAND from toolbar
Go to Files library. T-SPICE will be stored in “F:\Files_legacy
SEDIT\Generic_025.LIB”. Add this file just above .END command in the additional
spice commands area. Type “TT” at the end of this command.
11. Go to Insertanalysistransient select standard(from dc operating points)
Maximum time =10ns
Simulation = 100ns
Click on insert command
Similarly,
Analysis DC transfer sweep Sweep1: Sweep= linear, parameter = source, source
name = v1,start = 0, stop = 10 and increment = 1 Accept Insert.
1
Electronics and communication department VLSI LAB
Measurement = transient.
Parameter name = w1, Minimum value = 1u, Maximum value = 10u, Delta = 0.5u
Parameter name = L1, Minimum value = 1u, Maximum value = 10u, Delta = 0.5u,
Parameter name = w2, Minimum value = 1u, Maximum value = 2u, Delta = 0.5u,
Parameter name = L2, Minimum value = 1u, Maximum value = 2u, Delta = 0.5u,