Beruflich Dokumente
Kultur Dokumente
D10T
Waste Handler
2
Required Attachments Recommended Options Serviceability and Customer Support
✔ These attachments are required and ✔ Several additional options are highly The major component modular design
must be ordered with the basic Waste recommended to complement the Waste concept moves a generation ahead
Handling Arrangement. These include Handling Arrangement and ensure peak in simplified service and repair.
hydraulic and fuel tank guards, ROPS- performance. These range from landfill Customer support is unmatched
mounted air conditioners and condenser blades and front striker bars to specially in the industry. pg. 12
fans and cylinder mounted lights. pg. 8 designed track shoes and hydraulic
rippers. pg. 10
✔ New Feature
3
Waste Handling Guards
Extensive guarding helps protect critical machine components, body panels and the
radiator from being damaged by debris under harsh waste handling environments.
Minimizing build-up helps prevent component damage.
Radiator Guard. The heavy-duty Crankcase (belly) Guards. The crankcase Pivot Shaft Seal Guards. The pivot shaft
hinged radiator guard protects the (belly) guards serve a dual purpose. seal guards help prevent debris from
cooling system. They help prevent contact damage to entering and damaging the Duo-Cone®
vital power train components, and help seals as well as protecting the bolts on
keep debris out of the power train the pivot shaft seal retainers.
compartments.
Note: The D8T features an attachment
guard that can be electrically raised
and lowered.
4
Final Drive Seal Guards. The final drive Seal Guard Design. This design offers
seal guards help prevent wire, nylon superior protection to the seal. Debris
strapping, etc., from wrapping around would have to make four 90° turns,
and damaging the Duo-Cone seals. penetrate the packing material, and
The outer guard is now stationary, thicker, then make two additional 90° turns.
and has increased hardness, all of which
help prevent excessive wear from debris.
5
Debris Resistant Features
Additional modifications enhance productivity and help prevent damage.
Rear, Tank-mounted Lights. The rear, Heavy-duty Steps and Handles. High-capacity Alternator. The high-
tank-mounted lights are relocated on the The heavy-duty steps and handles capacity 95-amp alternator provides
ROPS, which removes the lights from are manufactured from plate steel additional power required for electrical
the concentrated debris environment and solid rod to withstand the rigors accessories such as supplemental lights
to help protect them from damage. of landfill operation. and communications and entertainment
Combinations vary depending on radios. The ducting helps prevent debris
each model. from entering into the alternator.
Raised Prescreener. Raised prescreener
helps reduce the likelihood of airborne
paper or plastics plugging the air intake.
It provides a larger air inlet. Part of
standard waste handling modification
when turbine precleaner is not ordered.
6
Required Attachments
These options must be ordered in addition to the basic Waste Handling Arrangement.
7
Required Attachments
These options must be ordered in addition to the basic Waste Handling Arrangement.
Enhanced Cab. The enhanced cab Hydraulic and Fuel Tank guard. Supplemental Cylinder Mounted Lights.
provides higher cab pressurization for The hydraulic and fuel guard helps The supplemental cylinder mounted
improved cab air quality in dust and protect implement hydraulic oil tank, lights (four front) are repositioned from
debris-laden applications. Includes a battery box and fuel tank. the fender/ openings to the top of the
powered precleaner, with a high cylinders. The fender openings are
efficiency filter, which reduces system covered with plates to prevent debris
maintenance intervals. from entering. Chose from either Halogen
or HID (high intensity discharge).
8
Laminated Thermal Shields.
The laminated thermal shields cover the
exhaust stack inside the compartment,
hot-side of the turbocharger, and the
exhaust manifold. These shields reduce
ROPS-mounted Air Conditioner
surface temperatures well below the
Condenser and Fans. The ROPS-
flash point of most common combustibles
mounted air conditioner and fans
encountered.
are relocated from the engine
compartment to the ROPS.
• Moving the condenser and fans
away from the radiator reduces
the concentration of debris and
plugging. This relocation also
increases the cooling capacity of
the machine for operation in higher
temperatures.
Note: The ROPS-mounted position
raises the height of the machine an
additional 30.5 cm (12 in).
9
Recommended Options
Features for peak performance. Several additional options are recommended to assist
in matching your site requirements.
Caterpillar Landfill Blades. Fast Fuel System. The optional fast fuel
The Caterpillar landfill blades increase system, with positive fuel shut-off to
the dozing capacity in trash and help prevent fuel spillage, can decrease
prevent material from spilling over downtime.
the blade and entering the radiator. Computer Aided Earthmoving
Wear plates are available and are System (CAES). The Computer Aided
recommended when working in Earthmoving System (CAES) is a high
highly abrasive materials. technology earthmoving tool that allows
machine operators to achieve maximum
landfill compaction, desired grade/slope,
and conserve and ensure even distribution
of valuable cover soil with increased
accuracy. This state-of-the-art machine
control system delivers real-time
elevation, compaction and grade control
information to machine operators on an
in-cab display. By monitoring grade and
compaction progress, operators have
Black Painted Hood, Cylinders, and the information they need to maximize
Back of Blade. The black painted hood, the efficiency of the machine, resulting
cylinders, and back of blade reduces in proper drainage and optimum
glare from lights while operating at night airspace utilization.
Front Striker Bars. The front striker and while operating in direct sunlight.
bars angled design prevents debris from
riding up the track and damaging the
fenders or fuel and hydraulic tanks.
10
Trapezoidal Hole Track Shoes.
The trapezoidal hole track shoes reduce
refuse packing within the track and
reduces track chain tightening and
accelerated pin and bushing wear.
Beacon Light. A heavy-duty Federal Remote Disconnect. Located in the cab,
The trapezoidal holes relieve packing
Signal Pulsator 551 single flash (5 joules) the remote disconnect switch is in series
by allowing the sprocket to punch out
strobe beacon unit is weather sealed and with the standard machine disconnect.
dirt and debris.
water resistant with the power supply The switch, located on the left side of
encased in gel. The beacon is wired the operator seat at knee level, allows
directly and can only be turned off by the operator to access the disconnect
the disconnect switch. Extends above switch quickly.
the highest part of the machine for
enhanced visibility.
11
Serviceability
Cat elevated sprocket tractors use a new generation modular design that simplifies service
and repair. Easy maintenance and fast in-field component exchange gives you more time
on the job.
Built-in Servicing Ease. Less service Quick Disconnect Fittings. The quick Diagnostic Connector. A diagnostic
time computes to more production time. disconnect fittings allow for fast connector allows the Cat Dealer’s
Major components are made as modules diagnosis of the power train and electronic test instrument to quickly
and most can be removed without implement oil systems. troubleshoot the electrical system or
disturbing or removing others. access stored data with the use of
Ecology Drains. The ecology drains
Electronic Technician (Cat ET) or ECAP.
Grouped Service Points. Grouped service provide an environmentally safer method
points and easy access to servicing to drain fluids. They are included on the Pre-testing Modular Components.
areas make routine inspections fast radiator, hydraulic tank and major Pre-testing modular components
and convenient. power train components. before installation or after repair
assures quality.
Services. Your Cat dealer offers a wide Service Capability. Whether in the Operation. Improving operating
range of services that can be set up under dealer’s fully equipped shop or in the techniques can boost your profits.
a Customer Support Agreement (CSA) field, you will get trained service Your Cat dealer has training videotapes,
when you purchase your equipment. technicians using the latest technology literature and other ideas to help you
The dealer will help you choose a plan and tools. increase productivity.
that can cover everything from machine
Selection. Make detailed comparisons Replacement. Repair, rebuild or
and attachment selection to replacement,
of the machines you are considering replace? Your Cat dealer can help
to help you get the best return on your
before you buy. How long do components evaluate the cost involved so you can
investment.
last? What is the cost of preventative make the right choice.
Product Support. You will find nearly maintenance? What is the true cost of
Customer Service Agreements. Dealer
all parts at our dealer parts counter. lost production? Your Cat dealer can give
service response extends to programs
Cat dealers utilize a world-wide computer you precise answers to these questions.
such as Custom Track Service (CTS),
network to find in-stock parts to minimize
Purchase. Consider the financing Scheduled Oil Sampling, and guaranteed
machine down time. Save money with
options available as well as day-to-day maintenance contracts that get peak life
remanufactured parts. You receive the
operating costs. This is also the time and performance from your machine.
same warranty and reliability as new
to look at dealer services that can be
products at a cost savings of 40 to
included in the cost of the machine
70 percent.
to yield lower equipment owning and
operating costs over the long run.
12
Specifications
**** Operating Weight: Includes lubricants, coolant, 100% fuel, hydraulic controls, ROPS canopy, FOPS Cab, SU-Blade
(U-Blade for D10T) with trash rack, special radiator core reversible fan, drawbar, engine enclosures, fuel tank guard,
extreme service crankcase (belly) guard, heavy-duty hinged radiator guard, higher prescreener, front and rear striker bars
and operator.
**** Engine model meets current levels of exhaust emission regulations for the EPA, EU, and JMOC at time of manufacture.
**** Height without ROPS canopy, exhaust pipe, seat or all easily removed encumbrances.
**** For all other models, refer to standard specalogs.
Note:
D8T configured with 8SU blade with 762 mm (30 in) track rack and 660 mm (26 in) track shoes.
D9T configured with 9SU blade with 914 mm (36 in) trash rack and 685 mm (27 in) track shoes.
D10T configured with 10U blade with 1107 mm (44 in) trash rack and 610 mm (24 in) track shoes.
© 2005 Caterpillar
All Rights Reserved
Printed in U.S.A.