Beruflich Dokumente
Kultur Dokumente
FEATURES AND BENEFITS Integrating a perimeter intrusion detection Key software components
system with site security processes is critical Network Manager initiates and controls all
• Common SMS/PSIM interface for all Senstar to achieve situational awareness and fast communication over the sensor network and
networked sensors, including OmniTrax®, response times. Senstar offers a suite of provides the interface for sensor status and
FlexZone®, XField®, IntelliFIBER™,
software and hardware components that system management.
UltraWave™ and FiberPatrol®
provide a range of integration options:
• Remote access for sensor configuration, The Network Manager software includes the
calibration and troubleshooting • Network Manager following components:
• Centralized system monitoring, including • Sensor network and communication cards • Front Panel – Displays the overall status of
sensor operation, performance, and event
• Gateway media converters the sensors and network. It is also used to
logging
• Configuration and calibration software configure the sensor network and SMS
• Combinational logic operations on multiple
zone/sensor alarms to create virtual zones • Alarm display software interface.
(Alarm Logic Engine) • Software development kit (SDK) with full • Network Manager Service (NMS) – The
• Optional redundant configuration for critical sensor API Network Manager software runs as a
applications Windows service to maximize reliability,
• Software Development Kit (SDK) with API Network Manager security, and remote accessibility.
documentation, test software and simulator • Application Programming Interface (API) –
software The Network Manager software
Provides an interface through which SMS
• Mulitple integration options with Senstar communicates directly with the Senstar
software receives alarm and status
and third-party Security Management sensors and provides a common IP interface
information from the networked sensors.
Systems (SMS) for use by Security Management Systems
The SMS can also use the API to control
• Microsoft Windows® compatible (SMS) or Physical Security Information
networked relay outputs and initiate
• Integrated sensor network reduces system Management (PSIM) systems. It also provides
sensor self-tests.
installation and maintenance costs an access point through which sensor
configuration tools can remotely access • System management tools – A set of
• Monitoring and control of auxiliary utilities for monitoring sensor status and
perimeter security equipment individual sensors.
performing troubleshooting (Plot tool,
• Configurable per-alarm ASCII output Running on the Windows operating system, Event Log tool and Status tool).
messages (serial/TCP/IP) Network Manager can reside on the same
PC as the SMS or on a dedicated PC.
Network Manager connects to the networked
sensors via gateway hardware (EIA-422,
fiber, or Ethernet) installed in the control
room.
DATASHEET
Senstar Sensor Integration | Flexible Sensor Management and Integration Options
Configuration, calibration and Software Development Kit (SDK) Gateway media converter
monitoring software with full sensor API If the sensor network runs over fiber or
Senstar includes a set of software tools EIA-422, a gateway media converter is
Senstar provides an SDK to enable
that enable system maintainers to required to interface the sensors with the
third-party SMS providers to communcate
configure, calibrate, and monitor PC running the Network Manager
with the Network Manager and integrate
networked sensors from a centralized software.
Senstar sensors into their systems.
location. Each tool communicates wth the
The SDK includes: Silver Network Interface Unit (SNIU)
Network Manager over TCP/IP and can
The SNIU is a rack-mount unit designed
run on separate PCs – a real time-saver • API documentation for loop networks running fiber or EIA-422:
when access to the Network Manager PC • Sample code for interfacing with API
is restricted or inconvenient. (C++, MFC) • Two pairs of sensor network
• A simulator for mimicking a Network connections (one for each end of the
• Universal Configuration Module (UCM) sensor network loop):
Configures and calibrates Senstar Manager connected to an array of
Senstar sensors (enabling developers to • Two EIA-422 connectors
sensors and performs firmware updates
test their software without having (with integrated lightning protection)
• Plot Tool – Records the response of a access to sensor hardware) • Two fiber optic connections
specific sensor and displays up to 8 (multi-mode or single-mode)
channels of recorded or live data API Functionality
The API provided by the Network Manager • PC interfaces (same type must be used
• Status Tool – Displays the status of all for each end of the loop):
provides the alarm display head-end or
sensors on the network • Two USB ports (Type B)
SMS access to all sensor data, including:
• Event Log Tool – Provides remote • Two Ethernet ports (RJ-45)
access to the Network Manager log • Intrusion alarm status
• Two EIA-232 serial ports (DSUB)
files and daily event information • Tamper status
• USB port for device configuration
• Communications status
• Redundancy: Includes a pass-through
• Diagnostic alarm status with fail-over mode
• Dry contact input status • Dimensions: 19-inch rack, 1U height,
• Control of relay outputs 23 cm (9 in) deep
• Sensor self-test initiation • Power: 3W, 12 to 48 VDC
The head-end/SMS communicates with • Indoor-rated
the Network Manager over TCP/IP. During
normal operation, unsolicited status
changes are sent to the SMS. The API also
includes query commands so that the SMS
can request the complete operational
status of the networked sensors.
Universal Configuration Module (UCM)
Mini-SNIU
The Mini-SNIU is a DIN-rail mountable USB
to fiber/EIA-422 converter:
• Interfaces:
• EIA-422
• Fiber optic connections (multi-mode
or single-mode)
• USB port (Type B)
Network Manager Front Panel • Dimensions (H/W/D): 11.5 x 3.2 x 12 cm
(4.5 x 1.25 x 4.75 in)
• Power: USB powered
• Indoor-rated
info@senstar.com • senstar.com
Copyright © 2017. All rights reserved. Features and specifications are subject to change without notice. The Senstar name and
logo, FiberPatrol, FlexZone, OmniTrax and XField are registered trademarks of Senstar Corporation. IntelliFIBER, Crossfire, FlexPS,
UltraWave, Silver Network, UltraLink, and StarNet are trademarks of Senstar Corporation. Windows is a registered trademark of ®
Microsoft Corporation. Product manufactured in ISO 9001:2008 certified facility. Version: DS-J4/C-IN-R7-E-06-17