Beruflich Dokumente
Kultur Dokumente
Interface Data
Configuration
www.huawei.com
2. Gb over FR
3. Gb over IP
Application
IP IP
Relay
SNDCP SNDCP GTP-U GTP-U
LLC LLC
Relay UDP UDP
RLC RLC BSSGP BSSGP
IP IP
MAC MAC Network Network L2 L2
Service Service
GSM RF GSM RF L1bis L1bis L1 L1
Um Gb Gn Gi
MS BSS SGSN GGSN
GMM/SM GMM/SM
LLC LLC
Relay
RLC RLC BSSGP BSSGP
UEPC is an optional pinch board that can provide the encryption and
compression function
UGBI performs the NS, BSSGP, LLC ,SNDCP and GMM/SM functions
BC
BC is the bearer channel of frame relay, corresponding to the timeslot group of
E1/T1
The whole E1/T1 line can be either configured as one BC, or divided into multiple
BCs. But it’s better to configure as many timeslots as possible in one BC.
For easy local management, BCs are distinguished by numbers, which are called
BCID (BC Identification).
•SGSN
BC1(TS1~TS3)
•BSS •TS1
•TS2 NSVE 1
•TS3
NSVC2
•TS4 NSVE 3
•TS5
NSVC4
•TS6
BC2(TS4~TS6)
E1 link BC2(TS1~TS3)
TS0~TS31
There are three kinds of BVC: Sig (signaling) BVC, PTP (point
to point) BVC and PTM (point to multipoint) BVC
SGSN
B
S NSEI-2
C
LL C
L1 L1
Gb Network Service
BSS SGSN
Sub-Network Service /
Sub-Network Service protocol
The UPIU and it’s pinch board UEEC or UEFC provide the
physical port for Gb interface to connect with PCU.
2. Gb over FR
3. Gb over IP
E1 E1
U U Port 0 460010002010001
0/1 G E 3
B P
4 BSS2 460010002010002
I I
Port 1 TS=1-10,DLCI=100, NEVCI=22 460010002010003
NSEI=2
U U
G E
0/2
B P
I I
SGSN
Link Subrac Slot Port BCID Time DLCI NSVC NSE BSSID
No. k No No No slot I I
Example:
ADD UEPIUTPICFG: SRN=0, SN=0, CL=SL, BT=UFEU_Plus,
BM=UNBALANCE;
Example:
ADD E1T1CFG: SRN=0, SN=0, PN=0, LKFRMT=DF, LKCT=HDB3;
Scenario 1
BSS SGSN
BC
DCE DTE
DTE DCE
DTE FR DTE
Example:
ADD NSE: OTHERNODE="to BSS1", NSEI=1, SRN=0, SN=0,
BSSID=1;
2. Gb over FR
3. Gb over IP
10.20.20.1:3322 10.20.30.1:2244/
/10.20.20.2:3323
IP network 10.20.30.2:2245
Router
IP of router: 10.30.30.3
UPIU UPIU
DATA UGFU PCU IP IP of UPIU:10.30.30.1/10.30.30.2
IP
User data and Control UFCU UGFU
signaling
IP of UGFU: 10.10.10.1/10.10.11.2
UDP port: 3344, 3345
IPVlink
Logical IP
Ethernet Port
IP route
IPVLINK
UGBI URCU/UBIU
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Slot Number of the Boards
UGBI(0/0) IP NSVC2
PCU1
IP NSVC3 (NSEI=1)
UGBI(0/1) IP NSVC4
IP NSVC5
UGBI(0/0) IP NSVC6
PCU2
IP NSVC7 (NSEI=2)
UGBI(0/1) IP NSVC8
IPVLNK1
UGBI(0/0) UGFU(3/10)
IPVLNK2
IPVLNK3
UGBI(0/1) UGFU(3/12)
IPVLNK4
UGBI(0/1);
Identify
Each IPVLNK is identified by (IP, Port; slot of UGBI)
Each IPVLNK will binding with a specific UGBI board. The banding
ensure the system forward the data between a UGFU and UGBI.
Example
ADD BRD: SRN=0, SN=0, BP=IO, BT=UGBI, RS=ACTIVE,
SPEC=B;
Example
ADD PUBNWIP: IP="10.30.30.0", MSK="255.255.255.0";
– IP
Router
~ Public network segment
Same subnetwork
UPIU
UPIU
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Step 5:Configure IP Address Of UPIU
ADD IFIP
This command is used to configure the IP for UPIU
Example
ADD IFIP: SRN=3, SN=10, PN=1, IP="10.30.30.1",
MSK="255.255.255.0", DESC="For Gb";
Example
ADD IPRT: IP=“10.0.0.0", MSK=“255.0.0.0", GATE="10.30.30.3";
– GATE
Example
ADD BRDIP: SRN=3, SN=10, IPT=IPV4, IPV4="10.10.10.1";
PCU
DATA UGFU IP PCU IP
After the binding, all packet data of a specific UGBI board will
process and forward by the corresponding UGFU board.
DW=200 DW=100
SW=200 SW=100
– DW
– SW