Beruflich Dokumente
Kultur Dokumente
Job No 2112
Report- Vol III
ROB @ 294+125
1 INTRODUCTION 1
2 SCOPE OF WORK 1
3 FIELD WORK 2
4 LABORATORY TESTS 3
6 SEISMICITY 5
7 STRENGTH CHARACTERISTSICS 6
8 DESIGN CRITERIA 8
9 COMPUTATIONS 9
10 RECOMMENDATIONS 9
ANNEXURES I & II
1
f) Preparation of report summarizing the details of soil
classification, analysis of test data for the design of foundation
etc.
1 20.00 14.60
2 20.00 15.10
294+125 ROB
3 20.00 15.20
4 20.00 15.80
2
depth of the sampler length, were noted. The number of blows (N-
value) as given in the bore hole data sheets is the numerical sum
of blows counted during the second & third stage only i.e. for a
depth of 30 cms.
The observed SPT (N – Values) are first corrected for Overburden
and then for dilatancy as per IS 2131:1981.
Overburden Corrected SPT Value N’ = CN * N
CN = Overburden Correction Factor as per IS 2131-1981
Correction for Dilatancy N” = 15 + 0.50 * (N’-15) for N’>15.
For N’<15 no correction is done for dilatancy.
3.3 Collection of Samples
Samples of soil and Rock were collected from the boreholes
wherever possible as per IS Code of practice.
3.4 Recording of water table
Water table was met at varying depths in boreholes at
the time of Soil investigation which was carried out in the
months of June-July 2018. The details are given in Table I above
and in the respective borelogs.
3
5.0 General Geology of the Area
The terrain is hilly and rugged comprising groups of low-lying
hillocks, rising between elevations of 100 and 400 meters above
mean sea level. The area is drained by the Gad, Janvli, and
Tamhane rivers which originate in the Western Ghats and flow
westwards. Numerous streams join these rivers during monsoon
resulting in their torrential flow.
Geological boundaries have been delineated between the
Archaean rock units, Kaladgi’s, Deccan lava flows and laterite. The
rock units recognised are Dharwarian metasediments comprising
micaceous gneiss, banded ferruginous quartzite, hornblende
schist, amphibolites, graphite schist and phyllite cut by basic
ultramafic rocks, which have also undergone metamorphism.
Sediments referable to Kaladgi’s with low dips rest unconformably
over Archaean rocks and Deccan Basalt flows have flooded over
all the older formations. The Archaean rocks have a NW-SE
regional trend conforming to the Dharwarian tectonic axis and
appear to represent strips of tightly folded synclines and anticlines.
The Kaladgi rocks are nearly horizontally bedded though at a few
places a gentle westerly tilt is discernible.
Deccan Basalts. Except for the laterites capping few plateau tops,
the Archaean metasediments in the Gad valley sections, and the
Kaladgi formations in the NE corner, the entire area is occupied by
the Deccan Basalts emplaced as horizontal lava flows. Though
they occur as outliers with wide lateral extent, at a few places they
form isolated hills attaining heights of more than 300 metres above
MSL. These flows appear to rest on an uneven topography as
disclosed by the irregular junction of the lava flows with the older
4
rocks with an uneven pre-trappean topography. The terrain
occupied by the basalts is under laterite cover.
5
Seismic Map of India
6
to 10.50m depth, 12.0m to 16.50m depth and from 18.0m to 19.50m
depth. At other depths RQD is varying from 7% to 24%.
7
8.0 DESIGN CRITERIA
Any foundation is to be safe against possible failure against
a) Excessive Shear failure (the bearing pressure should be with in
permissible limits) and
b) Excessive Settlement.
The latter depends upon not only on the type of soil in the
foundation but also on the type of foundation, material used for
construction and functionality of the structure.
8.1 Design Methodology
Footing Foundation has been analysed for an allowable
settlements of 50mm. Assuming scour depth of 0.50m below
Ground level.
8.1.1 Foundation Based on SPT & .
a) Shear failure criteria
The safe bearing pressure from Shear failure criteria can be
obtained, using the equation given below
Qu = q ( Nq - 1 ) Sq Dq Iq + 0.5 B N SD I W'
where,
B = Width of the footing in m
Dq,D = Depth factors
Sq,S = Shape factors
Iq,I = Inclination factors
Nq,N = Bearing capacity factor
q = Effective overburden pressure at foundation, in t/m2
W' = Water table correction factor
= Bulk unit wt. of foundation soil, in t/m3
8
b) Settlements:
a) Soil profiles are given for each borehole. The soil profile, which is
likely to cause greater settlements, is to be considered for
calculations.
9.0 COMPUTATIONS
The safe bearing Pressure for Footing Foundations are calculated
and are given at Annexure I.
10.0 RECOMMENDATIONS
Footing foundation is recommended. The Safe bearing pressure,
Width of Foundation and Depth of foundation are as given below:
Safe
Depth of fdn Width of
Bearing
Chainage BH below ground Foundation
Pressure
level (m) (m)
( t/m2 )
BH 1 to 6.00 40.0
294+125 3.00
BH 4 8.00 40.0
9
Annexure I
(Calculation)
Annexure- I
Bearing capacity analysis for shallow Foundation's
As per IS:6403
Borehole no: BH 1 to BH 4 BH 1 to BH 4
Cohension , C (T/m2) : 0 0
3
Density of soil (ϒ) T/m : 2.01 2.01
Depth of water table (W.T) m from G.L : 14.60 to 15.80 14.60 to 15.80
Depth factors (assumed that backilling is not compacted properly 1.00 1.00
SC 1.3 1.3
Sϒ 0.8 0.8
ic 1.00 1.00
Inclination factors
iq 1.00 1.00
:
iϒ 1.00 1.00
Φ 34 34
Nϒ = 2[{(exp
〖(πtan∅)∗〗 tan2(45+∅/2)+1}tan∅] 41.06 41.06
Φ' 24 24
Borehole no: BH 1 to BH 4 BH 1 to BH 4
Settlement under footing with a load intensity of 10 T/m2 after water table
12 12
correction :
15.00 m 15.00 m
37.00 m
SANGLI SOLAPUR
BH 1 BH 2
Proposed Bypass
BH 3 BH 4
PROJECT: Geotechnical Investigation work for proposed Four Laning of Watambare-Mangalwadha section of NH-166 from Km 276+000
to 321+600 under NH (O) on Hybrid Annuity Mode in the state of Maharashtra (Package III of Sangli-Solapur Section) Fig: P 294+124
Soil Enginering Consultants Project No. 2112
BH 1 BH 2 BH 3 BH 4
Filledup Material
Silty Sand
Rocky Strata
PROJECT: Geotechnical Investigation work for proposed Four Laning of Watambare-Mangalwadha section of NH-166 from Km 276+000
to 321+600 under NH (O) on Hybrid Annuity Mode in the state of Maharashtra (Package III of Sangli-Solapur Section)
Figure : Soilpro 294+125
SOIL ENGINEERING CONSULTANTS
PROJECT: Geotechnical Investigation work for proposed Four Laning of Watambare-Mangalwadha section of NH-166 from Km 276+000 Job No: 2112
to 321+600 under NH (O) on Hybrid Annuity Mode in the state of Maharashtra (Package III of Sangli-Solapur Section)
E 521551.962 N 1930089.823 R.L 506.333
Location: ROB @ CH 294+125 BH No: 1 DEPTH : 20.00 m Depth of WT : 14.60m Date of Start: 28/06/2018 Date of Finish: 29/06/2018
PERCOLATION TEST
LITHOLOGY CONDITIONS CASING LOSS
pieces
PERCENT CORE
OTHER SIZES
RECOVERY
BY APPLIED BY FALLING
SIZE OF HOLE
DEPTH
PERMEABILITY
PRESSURE HEAD
DESCRIPTION
TEST SECTION
METHOD METHOD
REMARKS
< 10 mm size
75 to 150 mm
10 to 25 mm
25 to 75 mm
80 COMPLETE
RQD
40 PARTIAL
> 150 mm
DESCRIPTION
WATER LEVEL
LOG
GROUT
PRESSURE
LOSS(l/m)
(kg/sq.cm)
INTERVAL
DEPTH OF
20 NO
TIME
100
100
100
60
0
20
40
80
60
60
80
0
40
20
mmNX BX AX
0
485.986 0.00 Silty Sand Silty Sand
485.486 0.50 CR(CM)=22,CR(%)=22
484.486 1.50 RQD(%)=Nil
Highly CR(CM)=32,CR(%)=22
weathered RQD(%)=Nil
482.986 3.00 Highly
fractured CR(CM)=21,CR(%)=14
Greyish RQD(%)=Nil,N>100
481.486 4.50 Basalt NX
CR(CM)=32,CR(%)=22
RQD(%)=Nil
479.986 6.00 Moderately CR(CM)=37,CR(%)=25
weathered RQD(%)=25
NOT CONDECTED
NOT CONDECTED
NOT CONDECTED
478.486 7.50 moderately
NOT USED
fractured CR(CM)=41,CR(%)=27
Greyish Basalt RQD(%)=27
476.986 9.00
CR(CM)=31,CR(%)=21
RQD(%)=Nil
475.486 10.50
CR(CM)=32,CR(%)=21
RQD(%)=7
473.986 12.00
CR(CM)=40,CR(%)=27
Highly to RQD(%)=11
472.486 13.50 Moderately
weathered CR(CM)=35,CR(%)=23
highly RQD(%)=Nil
470.986 15.00 fractured
Greyish Basalt CR(CM)=53,CR(%)=35
RQD(%)=Nil
469.486 16.50
CR(CM)=61,CR(%)=41
RQD(%)=25
467.986 18.00
CR(CM)=44,CR(%)=29
RQD(%)=Nil
466.486 19.50 CR(CM)=37,CR(%)=74
465.986 20.00 RQD(%)=24
SOIL ENGINEERING CONSULTANTS
PROJECT: Geotechnical Investigation work for proposed Four Laning of Watambare-Mangalwadha section of NH-166 from Km 276+000 Job No: 2112
to 321+600 under NH (O) on Hybrid Annuity Mode in the state of Maharashtra (Package III of Sangli-Solapur Section)
E 521539.403 N 1930097.01 R.L 506.967
Location: ROB @ CH 294+125 BH No: 2 DEPTH : 20.00 m Depth of WT : 15.10 m Date of Start: 28/06/2018 Date of Finish: 29/06/2018
PERCOLATION TEST
LITHOLOGY CONDITIONS CASING LOSS
pieces
PERCENT CORE
OTHER SIZES
RECOVERY
BY APPLIED BY FALLING
SIZE OF HOLE
DEPTH
PERMEABILITY
PRESSURE HEAD
DESCRIPTION
TEST SECTION
METHOD METHOD
REMARKS
< 10 mm size
75 to 150 mm
10 to 25 mm
25 to 75 mm
80 COMPLETE
RQD
40 PARTIAL
> 150 mm
DESCRIPTION
WATER LEVEL
LOG
GROUT
PRESSURE
LOSS(l/m)
(kg/sq.cm)
INTERVAL
DEPTH OF
20 NO
TIME
100
100
100
60
0
20
40
80
60
60
80
0
40
20
mmNX BX AX
0
486.620 0.00
Completely CR(CM)=21,CR(%)=14
weathered Basalt RQD(%)=Nil,N>100
485.120 1.50
Highly weathered CR(CM)=32,CR(%)=21
Highly fractured RQD(%)=Nil
483.620 3.00
Greyish Basalt CR(CM)=23,CR(%)=22
RQD(%)=Nil
482.120 4.50 NX
Completely CR(CM)=25,CR(%)=15
weathered Basalt RQD(%)=Nil N>100
480.620 6.00
CR(CM)=47,CR(%)=31
RQD(%)=Nil
NOT CONDECTED
NOT CONDECTED
NOT CONDECTED
479.120 7.50
NOT USED
CR(CM)=64,CR(%)=42
RQD(%)=7
477.620 9.00
CR(CM)=37,CR(%)=25
Moderately RQD(%)=13
476.120 10.50 weathered
Highly CR(CM)=43,CR(%)=29
fractured RQD(%)=10
474.620 12.00 Greyish Basalt
CR(CM)=53,CR(%)=35
RQD(%)=17
473.120 13.50
CR(CM)=47,CR(%)=31
RQD(%)=17
471.620 15.00
CR(CM)=79,CR(%)=53
RQD(%)=14
470.120 16.50
Moderately CR(CM)=71,CR(%)=47
weathered RQD(%)=39
468.620 18.00 moderately fractured
CR(CM)=96,CR(%)=64
Greyish Basalt RQD(%)=50
467.120 19.50 Fresh Greyish CR(CM)=50,CR(%)=100
466.620 20.00 color Basalt RQD(%)=100
SOIL ENGINEERING CONSULTANTS
PROJECT: Geotechnical Investigation work for proposed Four Laning of Watambare-Mangalwadha section of NH-166 from Km 276+000 Job No: 2112
to 321+600 under NH (O) on Hybrid Annuity Mode in the state of Maharashtra (Package III of Sangli-Solapur Section)
E 521585.739 N 1930066.616 R.L 505.254
Location: ROB @ CH 294+125 BH No: 3 DEPTH : 20.00 m Depth of WT : 15.20 m Date of Start: 27/06/2018 Date of Finish: 28/06/2018
PERCOLATION TEST
LITHOLOGY CONDITIONS CASING LOSS
pieces
PERCENT CORE
OTHER SIZES
RECOVERY
BY APPLIED BY FALLING
SIZE OF HOLE
DEPTH
PERMEABILITY
PRESSURE HEAD
DESCRIPTION
TEST SECTION
METHOD METHOD
REMARKS
< 10 mm size
75 to 150 mm
10 to 25 mm
25 to 75 mm
80 COMPLETE
RQD
40 PARTIAL
> 150 mm
DESCRIPTION
WATER LEVEL
LOG
PRESSURE
GROUT
LOSS(l/m)
(kg/sq.cm)
INTERVAL
DEPTH OF
20 NO
TIME
100
100
100
60
0
20
40
80
60
0
60
80
40
20
mmNX BX AX
0
484.907 0.00
Completely CR(CM)=21,CR(%)=14
weathered Basalt RQD(%)=Nil,N>100
483.407 1.50
CR(CM)=40,CR(%)=27
RQD(%)=Nil
481.907 3.00 Highly weathered
Highly fractured CR(CM)=42,CR(%)=28
Greyish color RQD(%)=Nil
480.407 4.50 Basalt NX
CR(CM)=49,CR(%)=33
RQD(%)=Nil
478.907 6.00
Moderately CR(CM)=60,CR(%)=40
weathered RQD(%)=37
NOT CONDECTED
NOT CONDECTED
NOT CONDECTED
477.407 7.50 Moderately
NOT USED
fractured Greyish CR(CM)=55,CR(%)=37
color Basalt RQD(%)=31
475.907 9.00
Moderately CR(CM)=51,CR(%)=34
weathered RQD(%)=Nil
474.407 10.50 Highly fractured
Greyish Color CR(CM)=36,CR(%)=24
Basalt RQD(%)=8
472.907 12.00 Moderately weathered
Moderately fractured CR(CM)=57,CR(%)=38
Basalt RQD(%)=38
471.407 13.50 Highly weathered CR(CM)=40,CR(%)=27
Highly fractured RQD(%)=Nil
469.907 15.00 Basalt
CR(CM)=57,CR(%)=38
RQD(%)=29
468.407 16.50
CR(CM)=94,CR(%)=63
Moderately RQD(%)=59
466.907 18.00 weathered
CR(CM)=116,CR(%)=77
moderately fractured RQD(%)=77
465.407 19.50 Greyish Basalt CR(CM)=44,CR(%)=88
464.907 20.00 RQD(%)=88
SOIL ENGINEERING CONSULTANTS
PROJECT: Geotechnical Investigation work for proposed Four Laning of Watambare-Mangalwadha section of NH-166 from Km 276+000 Job No: 2112
to 321+600 under NH (O) on Hybrid Annuity Mode in the state of Maharashtra (Package III of Sangli-Solapur Section)
E 521597.996 N 1930063.116 R.L 505.040
Location: ROB @ CH 294+125 BH No: 4 DEPTH : 20.00 m Depth of WT : 15.80 m Date of Start: 27/06/2018 Date of Finish: 28/06/2018
PERCOLATION TEST
LITHOLOGY CONDITIONS CASING LOSS
pieces
PERCENT CORE
OTHER SIZES
RECOVERY
BY APPLIED BY FALLING
SIZE OF HOLE
DEPTH
PERMEABILITY
PRESSURE HEAD
DESCRIPTION
TEST SECTION
METHOD METHOD
REMARKS
< 10 mm size
75 to 150 mm
10 to 25 mm
25 to 75 mm
80 COMPLETE
RQD
40 PARTIAL
> 150 mm
DESCRIPTION
WATER LEVEL
LOG
PRESSURE
GROUT
LOSS(l/m)
(kg/sq.cm)
INTERVAL
DEPTH OF
20 NO
TIME
100
100
100
60
0
20
40
80
60
0
60
80
40
20
mmNX BX AX
0
484.693 0.00
484.193 Silty Sand
0.50 CR(CM)=Nil,CR(%)=Nil
483.193 1.50 RQD(%)=Nil,N>100
Completely
weathered Basalt CR(CM)=27,CR(%)=18
RQD(%)=Nil
481.693 3.00
CR(CM)=33,CR(%)=22
Highly weathered RQD(%)=Nil
480.193 4.50 Highly fractured NX
Greyish color CR(CM)=35,CR(%)=23
Basalt RQD(%)=Nil
478.693 6.00
Completely CR(CM)=24,CR(%)=14
weathered Basalt RQD(%)=Nil, N>100
NOT CONDECTED
NOT CONDECTED
NOT CONDECTED
477.193 7.50
NOT USED
CR(CM)=42,CR(%)=28
RQD(%)=8
475.693 9.00
CR(CM)=47,CR(%)=31
RQD(%)=10
474.193 10.50
Highly CR(CM)=37,CR(%)=27
weathered RQD(%)=15
472.693 12.00 Highly
fractured CR(CM)=51,CR(%)=34
Greyish Basalt RQD(%)=19
471.193 13.50
CR(CM)=40,CR(%)=27
RQD(%)=Nil
469.693 15.00
CR(CM)=45,CR(%)=30
RQD(%)=Nil
468.193 16.50
Moderately weathered CR(CM)=68,CR(%)=45
moderately fractured RQD(%)=34
466.693 18.00 Greyish Basalt
Fresh Greyish CR(CM)=150,CR(%)=100
color Basalt RQD(%)=100
465.193 19.50 CR(CM)=41,CR(%)=82
464.693 20.00 RQD(%)=82