Beruflich Dokumente
Kultur Dokumente
: ABC/1001
101, Known Street, Known Area, Known City, Pin ….
Design by: UVW
Client: Very Important Industries Ltd, Well Known City Date: 13-Feb-19
Project: XYZ Building Page No. RW/101
Designs a RC Retaining Wall subjected to Normal Earth Pressure for the given properties of
backfill material, wall and base sections, Concrete grade and type of Steel.
INPUT
BACK FILL Angle of slope of bank Ф(deg) to horizontal(Ф=0 or ≤θ) 0
Angle of repose θ (deg) = 30
Density of back fill (kN/m3) = 20
Density of saturated back fill (kN/m3) = 20.8
Surcharge Uniform Surcharge load (kN/m2) = 5
Base Soil Safe Bearing Capacity of Soil (kN/m2) = 350
Coefficient of base friction between soil and concrete 0.57
RCDesignCD
Company's Name: ABC Consultants Job No.: ABC/1001
101, Known Street, Known Area, Known City, Pin ….
Design by: UVW
Client: Very Important Industries Ltd, Well Known City Date: 13-Feb-19
Project: XYZ Building Page No. RW/102
INPUT (Cont'd)
Wall Height of Wall, H (m) 3.500
Profile Depth of Water Table below GL, H1 (m) 2.000
Depth of soil above toe slab, H2 (m) 0.000
Wall thickness at top of base slab, T1 (m) 0.450
Wall thickness at top, T2 (m) 0.450
Base slab width, B (m) 2.500
Base slab toe dimension, B1 (m) 0.500
Base slab thickness, D (m) 0.400
Shear key depth, D1 (m) 0.000
Shear key thickness, T3 (m) 0.000
Material Concrete Grade, fck M 25 3
SBC of soil is more than the design pressures, hence base width is O.K
RCDesignCD
Company's Name: ABC Consultants Job No.: ABC/1001
101, Known Street, Known Area, Known City, Pin ….
Design by: UVW
Client: Very Important Industries Ltd, Well Known City Date: 13-Feb-19
Project: XYZ Building Page No. RW/104
RCDesignCD
Check for Shear in Wall by Limit State Method (Partial Safety Factor, γf = 1.5)
Depth of wall Ult. Shear Shear Stress 100 Ast Perm. Shear Stress Design Status
2 2
from top (m) Vu, kN τv, N/mm bd τc, N/mm of Wall
0 0.000 0.000 0.142 0.284 Section O.K.
0.333 1.389 0.004 0.142 0.284 Section O.K.
0.667 3.889 0.010 0.142 0.284 Section O.K.
1.000 7.500 0.019 0.142 0.284 Section O.K.
1.333 12.222 0.031 0.142 0.284 Section O.K.
1.667 18.056 0.046 0.142 0.284 Section O.K.
2.000 25.000 0.063 0.142 0.284 Section O.K.
2.375 34.872 0.088 0.142 0.284 Section O.K.
2.750 47.613 0.121 0.142 0.284 Section O.K.
3.125 63.222 0.160 0.142 0.284 Section O.K.
3.500 81.700 0.207 0.152 0.293 Section O.K.
Designing the base slab by limit-state method, Partial load factor, γf = 1.5
Moment at Q = 1.5x(102.42x0.5^2/2 +19.61x0.5^2/3 -(0+0.5x0.4x25) x 0.5) = 19.78 kNm
Moment at R = 1.5x(23.96x1.55^2/2 +60.81x1.55^2/6-(110.36+7.75+1.55x0.4x 25) x 0.775) = -75.63 kNm
Case: Total excluding soil load over toe slab & neglecting surcharge load:
Critical section
at 'd' from face
2
Soil Pr. at 'd' from Q = 114.853 kN/m
2
Soil Pr. at 'd' from R = 69.095 kN/m
Ultimate Shear (Partial lad factor, γf = 1.5:
Shear at 'd' from Q = 1.5x(114.85x0.181+7.61x0.181/2-(0x0.181/0.5+0.181x0.4x25)) = 29.50 kN
Shear at 'd' from R = 1.5x(17.32x1.231+51.77x1.231/2-(110.36x1.231/1.55+1.231x0.4x 25)) = -70.15 kN
Check for Shear in Base Slab by Limit State Method (Partial Safety Factor, γf = 1.5)
Ult. Shear Shear Stress 100 Ast Perm. Shear Stress Design Status
Location 2 2
Vu-max, kN τv, N/mm bd τc, N/mm of Base
Toe Slab 29.501 0.092 0.188 0.322 Section O.K.
Heel Slab 70.347 0.221 0.188 0.322 Section O.K.
RCDesignCD
Company's Name: ABC Consultants Job No.: ABC/1001
101, Known Street, Known Area, Known City, Pin ….
Design by: UVW
Client: Very Important Industries Ltd, Well Known City Date: 13-Feb-19
Project: XYZ Building Page No. RW/107
0 G.L.
GWT, -2
-
G.L., -3.5
-3.5 -3.5
-3.9 -3.9
Sectional Profile
RCDesignCD