Beruflich Dokumente
Kultur Dokumente
Rev. 0
FIA013-MCV-P0091-MC-XXX supply
CLIENT:
PROJECT:
REFERENCES:
VENTILATION CALCULATION SYSTEM
REVISION CONTROL
Elaborate Revised
Review Date Description of change
Initial Signature Initial Signature
INDEX
1. BACKGROUND …………………………………………………………………….3
2.SCOPE. ……………………………………………………………………………….3
3.CALCULATION OF VENTILATION.......................................................................3
3.1.MANUFACTURING MATERIALS......................................................................3
3.2.GEOMETRY OF THE DAMPER'S....................................................................4
3.3.CALCULATION OF VENTILATION...................................................................4
3.4.CONCLUSION..................................................................................................5
1. BACKGROUND
This document develops calculations for the entry of air from the ventilation
system for the 03 group generator CAT3516B encapsulated, 30-foot container.
2. SCOPE.
Develop a memory of supporting calculations about the influx of air needed for the
start-up of the genset.
3. CALCULATION OF VENTILATION
1MANUFACTURING MATERIALS
Motorized damper completo
MARK : MEZTECHNIK 20, plate system
Galvanized.(Trim available on request)
Fins : Sheet galvanized BWG Nº 16, formed.
Bearings : Nylon bushings or bronze self-lubricating (opc.), fixed in the
sides of the frame.
Hubs : Zinc plated iron and turning, diameter 1/2 ".
Links : Arms of iron zinc, Zamac joints, United
by terefilado zinc coated iron rod.
Bellows : Stainless steel conformed or galvanized.
3CALCULATION OF VENTILATION
According to the data extracted from the DATA SHEET of the generator, which
were provided by the manufacturer, shall be taken as essential requirements
and parameters for the calculation of the ventilation system.
a) PARAMETERS USED
Genset
Model Custom radiator Area effects. Air flow
Area : m2
Air flow : cfm.
Air in vain speed : m/s
Air entry
Measure
Area effects. Features Area effects. by Area effects. Vel air in vain
Dampers % Effective area
damper Total income (m/s)
Width High 5% Location Cant.
Salida de Aire
Measure
Area effects. Features Total effective Vel air in vain
Dampers % Effective area
area output (m/s)
Width High 12% Location Cant.
4CONCLUSION
It is concluded that the drafts (windows) made in the perimeter of the container
are appropriate to obtain sufficient area required for the entry and exit of air,
thus ensuring the correct operation of the generator without causing loss of
power due to excessive temperatures.