Beruflich Dokumente
Kultur Dokumente
MICROTEST
EM0 SERIES TABLE-TOP UNIVERSAL TESTING SYSTEMS
MICROTEST, S.A.
Systems and Solutions for Materials Testing
Tel: +34 91 796 33 32 - Fax: +34 91 796 32 36
microtest@microtest-sa.com
1 - www.microtest-sa.com
EM0 SERIES TABLE-TOP UNIVERSAL TESTING SYSTEMS
MICROTEST AT A GLANCE
MICROTEST, S.A. has over 25 years experience in In EM0 Series testing frames, the upper moving
design and manufacturing of high quality crosshead is actuated by a high performance
electromechanical and hydraulic testing systems electromechanical drive system and a single
with force capacities ranging from 500 N to lead ball screw. The preloaded ball screw along
5000 kN. MICROTEST is especially well-known for with a precisely-aligned, hard chrome plated
its scientific and technical expertise, superior guidance column provide superior stiffness and
product and service quality, and reliability in rigidity for these testing frames.
materials testing solutions. Microtest testing
Microtest EM0 Series universal testing systems
systems are compliant with international
feature high resolution digital control electronics
standards and designed carefully to meet the
and powerful servo motor drives, both essential
requirements of all common materials testing
for precise and smooth mechanical testing.
standards, such as ISO, ASTM, DIN, TAPPI, GB, JIS,
These testing systems integrate a digital closed-
ANSI, NAS.
loop servo control system with a reliable
Microtest universal testing systems are fast and electromechanical drive to perform tests in load,
easy to operate. Providing an ideal balance position (displacement) and strain control modes
between functionality and cost, these systems at force capacities ranging from 500 N (112 lbf)
are suitable for performing diverse mechanical to 10 kN (2,250 lbf).
tests on a wide variety of materials and
The EM0 Series universal testing systems provide
components, whether for routine quality control
a single-zone test space in which the test
and product testing or research projects and
specimens can be loaded/unloaded with
activities. Microtest universal testing systems are
minimal effort. This feature is further enhanced
extensively used worldwide in universities and
by a programmable switch mechanism that
research centers as well as a broad range of
allows operators to quickly set the upper and
industries from metals, polymers and composites
lower crosshead limits at any point within the
to concrete, textiles and fibers particularly in the
vertical test space.
manufacturing, automotive, aerospace, energy,
biomedical and construction sectors. Microtest EM0 Series universal testing systems can
be modified as required to suit the individual
testing requirements and needs of our customers.
OVERVIEW
2
EM0 SERIES TABLE-TOP UNIVERSAL TESTING SYSTEMS
FEATURES
SAFETY
To ensure operator safety and compliance with • An auto frame standby mode that
the latest international safety directives, the automatically stops the testing frame
design and engineering of Microtest when the load/strain transducers,
control electronics or computer system
electromechanical universal testing systems
get disconnected or stop working
incorporate all the latest safety features, properly
including:
• Dual level mechanical limit switches to
• A bright red ISO-approved emergency stop the moving crosshead at
stop button predetermined points
• Operating-mode selector and drive off • Limit-setting and configurable alarms for
switches load, crosshead position, strain or any
other measured/calculated channel
• System status light indicating whether
the load frame drive is energized and • Test space transparent safety shield to
ready for working protect the operator from flying
specimen fragments or other hazards
• Automatic limit checking for crosshead
over-travel, overload, over-voltage, etc.
3
EM0 SERIES TABLE-TOP UNIVERSAL TESTING SYSTEMS
ACCESSORIES
The utility of Microtest EM0 Series universal testing Furthermore, the EM0 Series universal testing
systems is further extended by a broad choice of systems are in full compatibility with the auxiliary
system options, grips, fixtures and accessories: testing equipment, such as video extensometers,
environmental chambers, high temperature
• A complete range of load cells, furnaces and temperature-controlled fluid
extensometers (including axial, baths. Using the proper testing configuration,
extended length and high temperature these testing systems can be used to conduct a
extensometers) and other transducers broad range of mechanical tests, including but
• A wide variety of manual and not limited to:
pneumatic grips with various jaw inserts
• Tensile / compression
(faces), specimen holders and fixtures
• Flexure / bend
• Compression platens
• Shear / friction / tear / peel
• Flexure / bend fixtures
10 kN 100 N 1 kN 2.5 kN
Vise Action Grip Screw Action Grip Pneumatic Grip Pneumatic Grip
96 mm 50 kN 2 kN 1 kN
Compression Platen Flexure Fixture Pneumatic Cord and Yarn Grip Pneumatic Pincer Grip
4
EM0 SERIES TABLE-TOP UNIVERSAL TESTING SYSTEMS
Microtest EM0, EM1 and EM2 Series calculations. SCM3000 software comprises a set
electromechanical universal testing systems are of modules (applications), including
controlled by SCM3000 digital controllers, Configuration, Methods Editor, Test Control, Data
designed and developed by Microtest Analysis and User Management. Each designed
specifically to meet the requirements of the for a specific purpose, these modules provide
most demanding materials testing applications. utmost flexibility to modify the preset standards-
SCM3000 digital controllers deliver high precision compliant test methods or create new ones,
closed-loop servo control and a fast 1000 Hz design complex test sequences, run tests,
data acquisition and control loop rate. This analyze data and report results using standard
capacity allows operators to generate high or custom-built templates containing test
resolution test data for more meaningful analysis information, graphs, tables, lists, etc. Depending
and achieve high accuracy across test runs. If on your workflow needs you can setup
required, the data acquisition rate can be automatic export options for the test data and
increased by several hundred times (optional). results: ASCII, Excel, PDF, plain text, Word and
image files. Moreover, the Data Analysis module
SCM3000 control and data acquisition
provides an intuitive interface to recall and
electronics contain a high resolution 8-channel
analyze the test data, display and modify the
analog-to-digital (A/D) converter, a high
results and generate test reports over time.
performance 32-bit digital signal processor
(DSP), and USB or Ethernet interface for PC SCM3000 software offers the optimum solution
communication. In addition to the 8 analog for any testing requirement. Using this software,
input channels (+/- 10V DC), there is a digital operators can control all of the functions of the
(pulse) input channel which is employed for testing system, providing ultimate convenience
precise position measurement and control. of operation. Besides, external devices such as
SCM3000 digital controllers include an video extensometers and test cams can be
integrated signal conditioner for the load connected to SCM3000 software and defined as
channel. Some applications may also require external channels in the Configuration Module.
direct strain measurement from the specimen or
load/strain control. Sensor conditioner cards can
be added to the SCM3000 electronics and these
are directly compatible with extensometers and
LVDTs, as well as load cells or other devices with
+/- 10V DC output signal.
SCM3000 digital controllers can take up to two
additional signal conditioner cards for the strain
channel(s) as standard but this can considerably
be increased using a Channel Expansion
Module (optional). This provides signal
conditioning and calibration for up to seven
transducers which may be used for control
and/or data acquisition. An analog output and
SCM3000 Test Control module
digital I/O card is also available (optional),
allowing connection of analog chart recorders
and plotters.
When coupled with the SCM3000 digital control
system, SCM3000 modular software enhances
the capabilities and versatility of Microtest
electromechanical universal testing systems for
accurate and repeatable mechanical testing of
materials, components and finished goods.
SCM3000 is a powerful and versatile, yet easy-to-
use interactive testing software with advanced
configuration, control and safety features. This
testing software includes a machine status bar
presenting the current status/functions of the
testing system and several configurable live
displays/graphs for the raw data and measured
values, as well as the test results and required SCM3000 Data Analysis module
5
EM0 SERIES TABLE-TOP UNIVERSAL TESTING SYSTEMS
SPECIFICATIONS