Beruflich Dokumente
Kultur Dokumente
HIGH TEMPERATURE
SERVICE
P 9 material
9 Cr. Martensitic steel were developed
as a result of the demand for ferritic
steel with higher creep strength.
C : 0.08 – 0.12 Cr : 8 – 9.
Si : 0.2 - 0.5 Ni : 0.04 max
Mn : 0.3 - 0.6 Mo : 0.85 – 1.05
P : 0.02 max. V : 0.18 – 0.25
S : 0.01 max. Nb : 0.06 – 0.01
Al : 0.02 max N : 0.03 – 0.07
MECHANICAL PROPERTIES
A) Induction Heating
B) Resistance Heating
PURGING
Purging with Argon at 8 to 10 lpm.
P 91 10” WELDING
POST HEATING
Post heating temp. : 316°C min.
Soaking Time : 1 Hr.
Controlled Cooling up to 90°C
PWHT
Soaking Temperature : 732±28°C
Soaking Time : 2 Hrs.
Rate of heating : 100 ± 20°C/Hr.
Rate of cooling : 100 ± 20°C/Hr.
Hardness : 241 BHN (max)
Position of thermo couples
Up to 4” dia 1 Bottom