Beruflich Dokumente
Kultur Dokumente
ICMQL Speed delimeter, proximity sensor etc. CAFD_0000067B_002_003_139.ncd C_Segeln_vorhanden disable Werte=00 other values needed for this
function? Not tested yet
ICMQL Speed delimeter, proximity sensor etc. CAFD_0000067B_002_003_139.ncd ECU name to be verified;
Tempomat, Auffahrwarnung etc.
VDC1_01 (motor, drive chain, gearbox etc.) CAFD_000006C6_002_009_006.ncd ECU name to be verified;
everything that goes into motor,
drive chain, gearbox etc.
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd KOMFORT_OEFF_SHD wert_01 Werte=23 UNKNOWN Werte=32 Comfort opening; delay between
FEM_BODY windows and roof (SHD); test
longer delay time with higher value
(Hex32/Dec50)
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd KOMFORT_SCHL_VORNE wert_01 Werte=05 UNKNOWN Werte=0A Comfort closing; delay between
FEM_BODY windows front and rear; test longer
delay time with double value
(Hex0A/Dec10)
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd KOMFORT_SCHL_SHD wert_01 Werte=23 UNKNOWN Werte=96 Comfort closing; delay between
FEM_BODY windows and roof (SHD); test
longer delay time with higher value
(Hex46/Dec70) or
(Hex96/Dec150); further
increasing values doesn't seem to
enlarge delay between windows
and roof!?
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd KOMFORT_ANSTEUERZEIT wert_01 Werte=2D UNKNOWN Werte=A0 max. activation time for comfort
FEM_BODY opening, -closing; increase from
Hex2D/Dec45 to Hex73/Dec160
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd KOMFORT_OEFFNEN wert_01 Werte=19 ??? Werte=00 minimum activation time of comfort
FEM_BODY opening after pressing key on
remote; try to set to Werte=00 to
allow immediate opening and
folding mirrors; not tested yet
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd KOMFORT_SCHLIESSEN wert_01 Werte=0F ??? Werte=00 minimum activation time of comfort
FEM_BODY closing after pressing key on
remote; try to set to Werte=00 to
allow immediate closing and
folding mirrors;
00=0 sec, 05=.5 sec or 0A=1 sec;
not tested yet
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd WW_ANZAHL_SPRITZIMPULSE_SRA 2_Impulse Werte=02 3_Impulse Amount of sprays per headlight
FEM_BODY wash; not coded and tested yet
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd WW_PAUSE_SPRITZIMPULSE_SRA 1000_ms Werte=0A not coded and tested yet
FEM_BODY
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd WW_SRA_SPERRZEIT 10_min Werte=0A not coded and tested yet
FEM_BODY
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd WW_SRA_GESCHWINDIGKEITS_DEAKTIVIERUNG
130_kmh Werte=82 Speed at which headlight washing
FEM_BODY is not available anymore (km/h in
HEX); left as it is
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd 3085 WipeWashIntegration, 15
FEM_BODY
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd 3090 HcSeatHeating, 1C
FEM_BODY
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd NACHLAUFZEIT_SITZHEIZUNG_FRONT
15_min Werte=01 status of seat heating mains active
FEM_BODY for respective tiime value after Kl.
15 is off; Not tested yet
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd 30A0 AirConditioning, 28
FEM_BODY
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd 30B0 ElectricColumnLock, 03
FEM_BODY
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd 30C0 ElectricSteeringWheelAdjust,
FEM_BODY 10
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd 30D0 RemoteControl, 13
FEM_BODY
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd 30E0 Transponder, 04
FEM_BODY
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd 3100 PfHorn, 01
FEM_BODY
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd 3105 PfCoolantLevel, 0A
FEM_BODY
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd 3110 PfExternalMirrorMaster, 10
FEM_BODY
FEM_01 / FrontElectronicModule CAFD_00000794_004_228_010.ncd ASP_BORDSTEINAUTOMATIK_DELTAwert01 Werte=3B UNKNOWN Werte=AA test if mirror goes further down
FEM_BODY with higher values; mirror can
have values between min
Hex55/Dec85 and HexAA/Dec175
(try Hex50/Dec80); tried HexAA,
mirror seems to go further down
but not further to the left
REM_01 Remote Equipment Module CAFD_000007A1_005_028_006.ncd D_SCHWELLE_1 wert_02 Werte=32 UNKNOWN Werte=FF X PDC deactivation; unlock while
driving; distance threshold; further
settings in PMA 3003
REM_01 Remote Equipment Module CAFD_000007A1_005_028_006.ncd D_SCHWELLE_2 wert_02 Werte=0A UNKNOWN Werte=FF X Rearview Camera picture; unlock
while driving; distance threshold
(only active when rolling
backward); possible values are
1=01, 2=0A, 3=00;
try FF; further settings in PMA
3003; worked for me after
activating REM- and PMA
settings; disadvantage that you
have to switch it off manually each
time; it anyway switches off
automatically after abot 20 sec;
pretty useless, thus revert back to
org. status
KOMBI Info display CAFD_000009C8_005_000_051.ncd ZEIGER_AUFSTART_ZEIT wert_01 Werte=20 what does this do? Not tested yet
L7_MID
KOMBI Info display CAFD_000009C8_005_000_051.ncd CC_RW_WARNUNG 50_km Werte=32 warning threshold for range
L7_MID indicator; Not tested yet
KOMBI Info display CAFD_000009C8_005_000_051.ncd NAVICOLOR_TABLE neue_farbtabelleWerte=01 will this change the color of the
L7_MID lines during route guidance? no it
is about the color of the overall
map and can also be selected via
control display
KOMBI Info display CAFD_000009C8_005_000_051.ncd 3001 CC_ID_Sperre, 80
L7_MID
KOMBI Info display CAFD_000009C8_005_000_051.ncd 3003 FZG_Ausstattung, 10
L7_MID
KOMBI Info display CAFD_000009C8_005_000_051.ncd SEGELN_ENABLE inaktiv Werte=00 other values needed for this
L7_MID function? Not tested yet
KOMBI Info display CAFD_000009C8_005_000_051.ncd 3004 ERM_Konfiguration, 20
L7_MID
KOMBI Info display CAFD_000009C8_005_000_051.ncd 3005 Tank, 4C
L7_MID
KOMBI Info display CAFD_000009C8_005_000_051.ncd 3006 A_Temp, 07
L7_MID
KOMBI Info display CAFD_000009C8_005_000_051.ncd 3007 KI_Dimmung, 24
L7_MID
KOMBI Info display CAFD_000009C8_005_000_051.ncd DIM_NACHT_EIN aktiv Werte=08 Aktiv FF White instrument cluster instead of
L7_MID orange @ night. It disables the
navi switch to night as well; not
tested yet
KOMBI Info display CAFD_000009C8_005_000_051.ncd 3008 PIA_Einheiten, 10
L7_MID
KOMBI Info display CAFD_000009C8_005_000_051.ncd 3009 CBS_Konfiguration, 20
L7_MID
KOMBI Info display CAFD_000009C8_005_000_051.ncd 300A Fahrgestell_Nr, 07
L7_MID
KOMBI Info display CAFD_000009C8_005_000_051.ncd 300B KI_Parameter, 20
L7_MID
KOMBI Info display CAFD_000009C8_005_000_051.ncd 300C ECO_FDS, 3C
L7_MID
KOMBI Info display CAFD_000009C8_005_000_051.ncd 3110 HUD_Parameter, 54
L7_MID
KOMBI Info display CAFD_000009C8_005_000_051.ncd Kombiinstrument
L7_MID
DSC_CT01 DSC CAFD_000009EF_000_021_001.ncd
DSC_CT01 DSC CAFD_000009EF_000_021_001.ncd 3000
DSC_CODIERDATEN_ALLGEMEIN,
20
DSC_CT01 DSC CAFD_000009EF_000_021_001.ncd 3001
DSC_CODIERDATEN_PHYSIK, 10
DSC_CT01 DSC CAFD_000009EF_000_021_001.ncd 3002
DSC_CODIERDATEN_RPA_CONTI,
06
DSC_CT01 DSC CAFD_000009EF_000_021_001.ncd 3003
DSC_CODIERDATEN_DEBUG, 08
DSC_CT01 DSC CAFD_000009EF_000_021_001.ncd 3004
DSC_CODIERDATEN_LIEFERANT_CONTI,
28
DSC_CT01 DSC CAFD_000009EF_000_021_001.ncd 3006 DSC_CODIERDATEN_FLM,
5C
DSC_CT01 DSC CAFD_000009EF_000_021_001.ncd 300C
DSC_CODIERDATEN_WERKSKENNUNG,
02
DSC_CT01 DSC CAFD_000009EF_000_021_001.ncd 300D
DSC_CODIERDATEN_NACHVERFOLGUNG,
06
DSC_CT01 DSC CAFD_000009EF_000_021_001.ncd
FZD__07 sun roof module CAFD_00000A07_002_013_002.ncd Funktions Zentrale Dach
FZD__07 sun roof module CAFD_00000A07_002_013_002.ncd 3000 USIS, 61
FZD__07 sun roof module CAFD_00000A07_002_013_002.ncd 3001 LIN - SINE, 28
FZD__07 sun roof module CAFD_00000A07_002_013_002.ncd Alarm type ece Werte=91 other alarm sounds possible? Not
tested yet
FZD__07 sun roof module CAFD_00000A07_002_013_002.ncd 3002 DWA, 09
FZD__07 sun roof module CAFD_00000A07_002_013_002.ncd Akustische Quittierung Schaerfen mit inaktiv Werte=00 aktiv Werte=01 chirps when closing car
Klappenbeachtung
FZD__07 sun roof module CAFD_00000A07_002_013_002.ncd Akustische Quittierung Entschaerfen inaktiv Werte=00 aktiv Werte=01 chirps when opening car
FZD__07 sun roof module CAFD_00000A07_002_013_002.ncd Akustische Signalisierung Heckklappe inaktiv Werte=00 aktiv Werte=01 X activation did not show an effect;
reversieren CA back to org. setting
FZD__07 sun roof module CAFD_00000A07_002_013_002.ncd
FZD__07 sun roof module CAFD_00000A08_003_010_001.ncd mostly settings and parameters for
roof systems
FZD__07 sun roof module CAFD_00000A08_003_010_001.ncd 3006 SHD, 13
FZD__07 sun roof module CAFD_00000A08_003_010_001.ncd 3007 Pos. SHD-Motor, 25
FZD__07 sun roof module CAFD_00000A08_003_010_001.ncd 3008 Pos. ESH-Motor, 25
FZD__07 sun roof module CAFD_00000A08_003_010_001.ncd 3009 EKS_SHD, FA
FZD__07 sun roof module CAFD_00000A08_003_010_001.ncd 300A EKS_ESH, FA
FZD__07 sun roof module CAFD_00000A08_003_010_001.ncd Funktions Zentrale Dach
IHKA_VA01 heating and air conditioning system CAFD_00000A3F_005_001_013.ncd Integrierte Heiz-/Klima-Automatik
PMA PDC, park assistant system CAFD_00000BCE_005_016_002.ncd D_SCHWELLE_1 wert_02 Werte=32 UNKNOWN Werte=FF X use only if settings in REM don't
work: PDC deactivation; unlock
while driving; distance threshold;
further settings in REM 3203
PMA PDC, park assistant system CAFD_00000BCE_005_016_002.ncd D_SCHWELLE_2 wert_02 Werte=0A UNKNOWN Werte=FF X use only if settings in REM don't
work: Rearview Camera picture;
unlock while driving; distance
threshold (only active when rolling
backward); possible values are
1=01, 2=0A, 3=00;
try FF; further settings in REM
3203; worked for me after
activating REM- and PMA
settings; disadvantage that you
have to switch it off manually each
time; it anyway switches off
automatically after abot 20 sec;
pretty useless, thus revert back to
org. status
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd NAVI_ROUTENMAGNET nicht_aktiv Werte=00 aktiv Werte=01 MMI shows an additional button to
activate route magnet map; didn't
find it until now; further testing
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd ENTWICKLER_MENUE nicht_aktiv Werte=00 aktiv Werte=01 X to be tested; it's more or less not a
menu but an information shown in
the Options dialog of the control
display; nothing can be done
there; revert to org. status
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd SPEEDLOCK_FREISCHALTMENU nicht_aktiv Werte=00 aktiv Werte=01 X to be tested; doesn't seem to
work; no menu found; reverted
back to org. status
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd M_DIGITAL_TACHO_EINH Not tested yet
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd M_DIGITAL_TACHO Not tested yet
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd COMFORT_OPENING nicht_aktiv Werte=00 aktiv Werte=01 X to be tested; comfort access did
also work with setting to "inaktiv";
additional checkbox in
settings/doors?; reverted back to
org. status
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd EFF_DYN_SAILING nicht_aktiv Werte=00 Checkbox for activating "sailing"
exists or not; Not tested yet
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd SPEEDLOCK_HMI_TUNER has only effects on RDS radio text
display; Not tested yet
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd HIGH_BEAM_ASSISTANT nicht_aktiv Werte=00 aktiv Werte=01 X comfort high beam assistant did
also work with setting to "inaktiv";
it adds a checkbox for HBA in the
control menu (settings/light) to
completely deactivate HBA;
seems to be useless, revert to org.
status
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd ACOUSTICAL_LOCK_CONFIRM aktiv Werte=01 seems to be set automatically with
other settings for accoustical
confirmation, as the menu is there,
but wasn't in the beginning
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd MANEUVER_LIST Not tested yet
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd KI_SELECTION_SOC nicht_aktiv Werte=00 aktiv Werte=01 Batterie condition within BC;
doesn't seem to show up/work;
further testing
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd 3001 EXBOX, 97
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd EARLY_VIDEO_LEGALDISCL initwert Werte=00 Disclaimer for "Early Video"?
Original value unknown, as it
seems to have changed
automatically to "Werte=0" through
other speedlock settings!
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd MACRO_CAM_LEGALDISCLAIMER ld_mit_timeout Werte=06 kein_ld Werte=00 removes disclaimer for PDC
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd LEGAL_DISCLAIMER_TIME ld_mit_timeout kein_ld Werte=0 seems to have been automatically
set to kein_ld with other settings
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd HVAC_AUTOMATIC_INTENSITY not yet tested
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd HVAC_POPUP_AIRDISTR not yet tested
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd HVAC_POPUP_AUTO_TOGGLE not yet tested
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd STARTUP_TYPE not yet tested
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd RDC_SAFETY nicht_aktiv Werte=00 aktiv Werte=01 only for "Sicherheitsfahrzeuge";
left as it was
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd STARTUP_EMBLEM variant_00 Werte=00 variant_01 Werte=01 animated startup picture for
control display
03 = "BMW Connected Drive";
01 = "M"
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd PDC_3D nicht_aktiv Werte=00 aktiv Werte=01 replaces objects in reverse
camera from flat 2D with 3D
objects
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd AUTO_PDC nicht_aktiv Werte=00 aktiv Werte=01 X no working effect detected; back
to org. setting;
(should automatically activate front
PDC when detecting parking
manoeuvres)
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd SPA_CHECKBOX nicht_aktiv Werte=00 aktiv Werte=01 X should activate a checkbox for
gear switching indicator; useless
for automatic gear cars; revert
back to irg. status
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd 3002 AUDIO_TUNER_TRAFFIC, 96
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd VOLUME_POPUP nicht_aktiv Werte=00 aktiv Werte=01 X should activate optical popup as
soon as volume is modified;
doesn't seem to work; reverted
back to org. status
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd VOLUME_POPUP_REJECTION aktiv Werte=01 nicht_aktiv Werte=00 X should activate optical popup as
soon as volume is modified;
doesn't seem to work; reverted
back to org. status
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd VOLUME_POPUP_EXCEPTION aktiv Werte=01 nicht_aktiv Werte=00 X should activate optical popup as
soon as volume is modified;
doesn't seem to work; reverted
back to org. status
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd VOLUME_POPUP_DISPLAY nicht_aktiv Werte=00 aktiv Werte=01 X should activate optical popup as
soon as volume is modified;
doesn't seem to work; reverted
back to org. status
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd RADIO_WEATHERBAND nicht aktiv Werte=00 Adds weatherband to radio; not
tested yet
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd 3003
TELEFON_TELEMATIK_ONLINE,
96
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd INBAND_RINGING nicht_aktiv Werte=00 aktiv Werte=01 brings ringtone of the smartphone
to the loudspeakers (instead of
standard car ringtone); further
testing
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd RINGTONE bmw Werte=00 rr Werte=03 selection of ring tone (original
value is "bmw"); possible values:
bmw, bmw-i, RR, mini; further
testing
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd 3004 SYSTEM_EINSTELLUNGEN,
96
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd DEL_PERS_DATA nicht_aktiv Werte=00 aktiv Werte=01 should show a checkbox allowing
to delete personal data; to be
found in the Internet browser
options
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd 3005 APIX CID, 96
HU_NBT Head Unit and navigation CAFD_00000DED_002_002_008.ncd
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd Camera based assistance
systems
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3000 KAFAS_COMMON, 2B Kamerabasierende
Fahrerassistenzsysteme
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3010 SLI_CODING, 88
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3020 TLC_CODING, 09
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3030
TLC_WARNING_PARAMETERS, 81
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd DELAY_AFTER_PRECEDING default Werte=1E Not tested yet
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd DELAY_AFTER_SLOW_OVERTAKING default Werte=50 Not tested yet
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd SENS_TAILLIGHT_DETECTION default Werte=00, 64 Not tested yet
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3060 FCW_CODING, 17 lots of parameters without
explanation
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3070 lots of parameters without
FCW_WARNING_PARAMETERS, explanation
DF
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3080 lots of parameters without
FCW_WARNING_PARAMETERS_2, explanation
BA
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3090 lots of parameters without
FCW_WARNING_PARAMETERS_3, explanation
5D
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3100 ENVINT, 07
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3110 HEATER_CODING, 15
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3120 VD_CODING, 06
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3140 KAFAS21_SPECIFIC, 07
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3150
PEDESTRIAN_DETECTION_GLOBAL,
03
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3160
PEDESTRIAN_DETECTION_DANGER_ZONES,
63
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3170
PEDESTRIAN_DETECTION_WARNING_SCHEME,
24
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3180
PEDESTRIAN_DETECTION_SYSTEM_BOUNDARIES,
0C
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3190 CCM_CODING, 12
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3200
CCM_BRAKING_PARAMETERS,
23
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd 3210 KAFAS22_SPECIFIC, 01
Kafas2 Camera based assistance systems CAFD_00001148_000_011_010.ncd Kamerabasierende
Fahrerassistenzsysteme
ACSM Advanced Crash Safety Module
FBM (scheint die Bedieneinheit Radio mit 8 Fest-Tasten zu sein) (radio with 8 programmable keys?)
ghi values that were coded without having the desired results (reverted back to former v
jkl values that seemed interesting to me, but no testing at the moment