Beruflich Dokumente
Kultur Dokumente
MY PROFILE Solution Report For Control System Part 1
Represent w hole test solution w ith correct and incorrect answ ers.
REPORTS
View Your Test Analysis
BUY PACKAGE
NEWS
Q. No Question Status
Ask an Expert
Q.1 Consider the closed loop control system as shown in figure below.
The closed loop poles of the system are
a. –4, –10
b. –4, –6
c. –4, 6
d. –4, 10
Q.2 Relationship between input x(t) and output y(t) of a system is given as
The transfer function of this system is
a.
b.
c.
d.
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1447&t=a&testType=2 1/7
1/12/2017 MADE EASY ONLINE TEST SERIES
Q.3 Consider the block diagram shown below
The transfer function is:
a.
b.
c.
d.
Q.4 The signal flow graph of the system is shown in the given figure. The transfer
function of the system is
a.
b.
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1447&t=a&testType=2 2/7
1/12/2017 MADE EASY ONLINE TEST SERIES
c.
d.
Q.5 The order of a system whose open loop transfer function given by
is ___________.
Q.6 The value of C/R is _____
(assume G1 = 2, G2 = 9, G3 = 5, G4 = 1 also H1 = H2 = 4 and H3 = 6)
Q.7 Consider the signal flow graph in the figure shown below
then the transfer function is equal to __________.
Q.8 The signalflow graph shown in figure below has:
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1447&t=a&testType=2 3/7
1/12/2017 MADE EASY ONLINE TEST SERIES
a. three forward paths and two nontouching loops
b. three forward paths and three nontouching loops
c. two forward paths and two nontouching loops
d. two forward paths and three loops
Q.9 Consider the block diagram shown in the figure.
The overall gain of the block diagram shown below is
a.
b.
c.
d.
Q.10
A forcing function (t2 – 2t) u(t – 1) is applied to a linear system. The Laplace
transform of the forcing function is
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1447&t=a&testType=2 4/7
1/12/2017 MADE EASY ONLINE TEST SERIES
a.
b.
c.
d.
Q.11 The signal flow graph for a system is given below. The transfer function Y(s)/U(s)
for this system is given as
a.
b.
c.
d.
Q.12 Consider a system with input r (t) and output y(t). The system can be described by
the differential equation
The state diagram with zero initial condition can be represented as
a.
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1447&t=a&testType=2 5/7
1/12/2017 MADE EASY ONLINE TEST SERIES
b.
c.
d.
Q.13
The overall gain of the signal flow graph shown below is _____________.
Q.14 A control system with certain excitation is governed by the following
mathematical equation,
where y is the input and x is the output,
The sum of the time constants of the response of the system is _______ sec.
Q.15 The block diagram of a second order system is given below
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1447&t=a&testType=2 6/7
1/12/2017 MADE EASY ONLINE TEST SERIES
The closed loop dc gain of the system is ___________
Q.16 Consider the following signal flow graph of the system:
The values of k1 for which the system has poles at the points (–2 ± j 2) is
_______.
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1447&t=a&testType=2 7/7