Beruflich Dokumente
Kultur Dokumente
FORMATTING (ADF)
PROGRAMMER GUIDE
ADVANCED DATA FORMATTING
PROGRAMMER GUIDE
72E-69680-05
Revision A
December 2015
ii Advanced Data Formatting Programmer Guide
No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means,
without permission in writing from Zebra. This includes electronic or mechanical means, such as photocopying,
recording, or information storage and retrieval systems. The material in this manual is subject to change
without notice.
The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on
a licensed basis. Zebra grants to the user a non-transferable and non-exclusive license to use each software
or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be
assigned, sublicensed, or otherwise transferred by the user without prior written consent of Zebra. No right to
copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall
not modify, merge, or incorporate any form or portion of a licensed program with other program material, create
a derivative work from a licensed program, or use a licensed program in a network without written permission
from Zebra. The user agrees to maintain Zebra’s copyright notice on the licensed programs delivered
hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not
to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any
portion thereof.
Zebra reserves the right to make changes to any software or product to improve reliability, function, or design.
Zebra does not assume any product liability arising out of, or in connection with, the application or use of any
product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any Zebra Technologies
Corporation, intellectual property rights. An implied license only exists for equipment, circuits, and subsystems
contained in Zebra products.
Warranty
For the complete Zebra hardware product warranty statement, go to:
http://www.zebra.com/warranty.
iii
Revision History
Changes to the original manual are listed below:
-02 Rev. A 4/2009 Motorola rebranding, add beeper indications, add new imager-supported
symbology bar codes, add specific string search and new move cursor options bar
codes.
-03 Rev. A 4/2011 Add Korean 3 of 5, RFID, and Parsed Driver’s License code type criteria bar codes.
-04 Rev. A 4/2015 Add Han Xin, OCR, GS1 DataMatrix and GS1 QR type bar codes; add Bar Code
Encoding Scheme (Code Page) action bar codes; Zebra rebranding.
-05 Rev. A 12/2015 Add Multicode parameter; add Code Length Compare criteria; add String Criteria;
add Send Custom Key action.
iv Advanced Data Formatting Programmer Guide
TABLE OF CONTENTS
Warranty ......................................................................................................................................... ii
Revision History .............................................................................................................................. iii
Index
ABOUT THIS GUIDE
Introduction
The Advanced Data Formatting Guide provides bar codes that allow advanced programming of a Zebra scanner,
and instructions for using them.
Chapter Descriptions
• Chapter 1, Advanced Data Formatting (ADF) describes how to customize scanned data before transmitting
to the host.
• Chapter 2, ADF Bar Codes contains the bar codes for advanced data formatting.
Notational Conventions
The following conventions are used in this document:
CAUTION This symbol indicates that if this information is ignored, the possibility of data or material damage may
occur.
viii Advanced Data Formatting Programmer Guide
Related Documents
The Quick Reference Guide and Product Reference Guide for Zebra scanners provide general information to
help get started and use the scanner. They include basic set up, connection, and operation instructions.
For the latest version of this guide and all Zebra guides, go to: http://www.zebra.com/support.
Service Information
If you have a problem using the equipment, contact your facility's technical or systems support. If there is a
problem with the equipment, they will contact the Zebra Technologies Global Customer Support Center at:
http://www.zebra.com/support.
When contacting Zebra Technologies support, please have the following information available:
If your problem cannot be solved by Zebra Technologies support, you may need to return your equipment for
servicing and will be given specific directions. Zebra is not responsible for any damages incurred during
shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the
warranty.
If you purchased your business product from a Zebra Technologies business partner, contact that business
partner for support.
CHAPTER 1 ADVANCED DATA
FORMATTING
Introduction
Advanced Data Formatting (ADF) is a means of customizing data before transmission to the host device. Use
ADF to edit scan data to suit requirements.
Implement ADF by scanning a related series of bar codes in Chapter 2, ADF Bar Codes, or by installing the
123Scan utility (see the scanner’s Product Reference Guide) which allows programming the device with ADF
rules.
Avoid using ADF formatting with bar codes containing more than 60 characters. To add a prefix or suffix value
for such bar codes, use the Add Prefix/Suffix setting from the scanner’s Product Reference Guide. Using ADF
with longer bar codes transmits the bar code in segments of length 252 or less (depending on the host
selected), and applies the rule to each segment.
Criteria: When scan data is Code 39, length 12, and data at the start position is the string “129”,
Actions: pad all sends with zeros to length 8,
send all data up to X,
send a space.
Scanning a Code 39 bar code of 1299X1559828 transmits the following: 00001299<space>. If you scan a
Code 39 bar code of 1299X15598, this rule is ignored because the bar code didn’t meet the length criteria.
The rule specifies the editing conditions and requirements before data transmission occurs.
1-2 Advanced Data Formatting Programmer Guide
• Start the Rule. Scan the Begin New Rule bar code on page 2-4.
• Specify Criteria. Scan the bar codes for all pertinent criteria. Criteria can include code type (e.g., Code
128), code length, or data that contains a specific character string (e.g., the digits “129”). See Criteria on
page 2-11.
• Select Actions. Scan all actions related to, or affecting, these criteria. The actions of a rule specify how
to format the data for transmission. See Actions on page 2-69.
• Save the Rule. Scan the Save Rule bar code on page 2-5. This places the rule in the “top” position in the
rule buffer.
• Use special-purpose bar codes to correct errors during this process. Erase criteria, actions, and entire
rules by scanning the appropriate bar code starting on page 2-5.
An auto parts distribution center wants to encode manufacturer ID, part number, and destination code into their
own Code 128 bar codes. The distribution center also has products that carry UPC bar codes, placed there by
the manufacturer. The Code 128 bar codes have the following format:
MMMMMPPPPPDD
Where: M = Manufacturer ID
P = Part Number
D = Destination Code
The distribution center uses a PC with dedicated control characters for manufacturer ID <CTRL M>, part
number <CTRL P>, and destination code <CTRL D>. At this center the UPC data is treated as manufacturer ID
code.
When scanning data of code type Code 128, send the next 5 characters, send the manufacturer ID key
<CTRL M>, send the next 5 characters, send the part number key <CTRL P>, send the next 2 characters,
send the destination code key <CTRL D>.
When scanning data of code type UPC/EAN, send all data, send the manufacturer ID key <CTRL M>.
To correct any errors made while entering this rule, scan the Quit Entering Rules bar code on page 2-7. If you
already saved the rule, scan the Erase Previously Saved Rule bar code on page 2-6.
245671243701500
where:
Class = 24
Stock Number = 56712437
Price = 01500
24 (class key)
56712437 (stock key)
01500 (enter key)
24 (class key)
56712437 (stock key)
1-4 Advanced Data Formatting Programmer Guide
To implement this, first enter an ADF rule that applies to the normal situation, such as:
Scan Rule Belongs to Set 1. When scanning a bar code of length 15, send the next 2 characters, send the
class key, send the next 8 characters, send the stock key, send the data that remains, send the Enter key.
Scan Rule Belongs to Set 2. When scanning a bar code of length 15, send the next 2 characters, send the
class key, send the next 8 characters, send the stock key.
To switch between the two sets of rules, program a “switching rule” that specifies the type of bar code to be
scanned to switch between the rule sets. For example, in the case of the “sale” rule above, the rule
programmer wants the cashier to scan the bar code “M” before a sale. To do this, enter the following rule:
When scanning a bar code of length 1 that begins with “M”, select rule set number 1.
When scanning a bar code of length 1 that begins with “N”, turn off rule set number 1.
When scanning a bar code of length 15, send the next 2 characters, send the class key, send the next 8
characters, send the stock key, turn off rule set 1.
For optimal results, scan the Disable All Rule Sets bar code on page 2-10 after programming a rule belonging
to an alternate rule set.
In addition to enabling and disabling rule sets within the rules, enable or disable them by scanning the
appropriate bar codes on page 2-8.
All programmed rules are stored in a buffer. As they are programmed, they are stored at the “top” of a rules list.
If you create three rules, the list is configured as follows:
Third Rule
Second Rule
First Rule
When you scan data, the rules list is checked from top to bottom to determine if the criteria matches (and
therefore, if the actions occur). Input is modified into the data format specified by the first matching set of
criteria it finds. Be sure to program the most general rule first.
When scanning a bar code of any length, send all data, then send the ENTER key.
When scanning a Code 128 bar code of length 12, send the first four characters, then send the ENTER key,
then send all remaining data.
and you scan a Code 128 bar code of length 12, the THIRD rule applies and the SECOND rule appears to not
function.
Advanced Data Formatting 1-5
Note that using the standard data editing functions also creates ADF rules. Scan options are entered as ADF
rules, and the previous hierarchy also applies to them. For the device, this applies to prefix/suffix programming
in the Scan Data Transmission Format parameter in the scanner Product Reference Guide.
These rules reside in the same “rule list” as ADF rules, so the order of their creation is also important.
Default Rules
Every unit has a default rule to send all scan data. Units with custom software can have one or more default
rules burned in. The rules hierarchy checks user programmable rules first, then the default rules. Disable
default rules by entering the following general rule in the user programmable buffer:
Since this rule always applies, ADF never enters the default rules.
Beeper Indications
The decoding device emits the beeps indicated in Table 1-1 during ADF programming. Indications may vary
depending on the device.
High/low beeps Enter another digit. Add leading zeros to the front if necessary.
Low/low beeps Enter another alphabetic character or scan the End of Message bar code.
High/high beeps Enter another criterion or action, or scan the Save Rule bar code.
High/low/low beeps All criteria or actions cleared for current rule, continue entering rule.
Low beep Delete last saved rule. The current rule is left intact.
Low/high/low/high beeps Out of rule memory. Erase some existing rules, then try to save rule again.
Low/high/low beeps Cancel rule entry. Rule entry mode exited because of an error or the user
asked to exit rule entry.
Low/high beeps Entry error, wrong bar code scanned, or criteria/action list is too long for a rule.
Re-enter criterion or action.
1-6 Advanced Data Formatting Programmer Guide
CHAPTER 2 ADF BAR CODES
Parameter Page
Number
Erase 2-5
Criteria 2-11
Page
Parameter
Number
Actions 2-69
Beeps 2-132
Page
Parameter
Number
Special Commands
Pause Duration
This parameter, along with Send Pause on page 2-85, inserts a pause in the data transmission. Set the pause
by scanning a two-digit number (i.e., two bar codes) representing a 0.1 second interval in the range of 0.1 to
9.9. For example, scan bar codes 0 and 1 to insert a 0.1 second pause; 0 and 5 to insert a 0.5 second delay.
The default is 1 second. See Numeric Keypad on page 2-61. To correct an error or change a selection, scan
Cancel on page 2-66.
Pause Duration
Save Rule
Scan the bar code below to save the rule.
Save Rule
Erase
Use these bar codes to erase criteria, actions, or rules.
Erase (continued)
Use these bar codes to erase criteria, actions, or rules.
Erase (continued)
Use these bar codes to erase criteria, actions, or rules.
Criteria
Code Types
Select all code types to be affected by the rule. Scan all selected codes in succession, before selecting other
criteria. To select all code types, do not scan any code type.
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
Code 39
Codabar
2 - 12 Advanced Data Formatting Programmer Guide
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
GS1 DataBar-14
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
Code 128
2 - 14 Advanced Data Formatting Programmer Guide
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
Discrete 2 OF 5
IATA 2 of 5
ADF Bar Codes 2 - 15
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
Interleaved 2 of 5
Code 93
2 - 16 Advanced Data Formatting Programmer Guide
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
UPC-A
UPC-E
ADF Bar Codes 2 - 17
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
EAN-8
EAN-13
2 - 18 Advanced Data Formatting Programmer Guide
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
ISSN
MSI
ADF Bar Codes 2 - 19
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
GS1-128
UPC-E1
2 - 20 Advanced Data Formatting Programmer Guide
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
Bookland EAN
Trioptic Code 39
ADF Bar Codes 2 - 21
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
Code 11
Code 32
2 - 22 Advanced Data Formatting Programmer Guide
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
ISBT 128
Coupon Code
ADF Bar Codes 2 - 23
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
Chinese 2 of 5
Matrix 2 of 5
2 - 24 Advanced Data Formatting Programmer Guide
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
Korean 3 of 5
ADF Bar Codes 2 - 25
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
US Postnet
US Planet
2 - 26 Advanced Data Formatting Programmer Guide
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
UK Postal
Japan Postal
ADF Bar Codes 2 - 27
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
Australian Postal
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
PDF417
MicroPDF
2 - 30 Advanced Data Formatting Programmer Guide
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
Macro PDF
Macro MicroPDF
ADF Bar Codes 2 - 31
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
MaxiCode
Data Matrix
2 - 32 Advanced Data Formatting Programmer Guide
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
QR Code
MicroQR
ADF Bar Codes 2 - 33
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
TLC 39
UPC/EAN Composites
2 - 34 Advanced Data Formatting Programmer Guide
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
Aztec
ADF Bar Codes 2 - 35
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
Aztec Rune
Han Xin
2 - 36 Advanced Data Formatting Programmer Guide
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
NOTE Only use this bar code to create rules on parsed driver's license data when configured for Embedded
Driver's License Parsing.
OCR
ADF Bar Codes 2 - 37
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
RFID Raw
RFID URI
2 - 38 Advanced Data Formatting Programmer Guide
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
GS1 QR
GS1 Datamatrix
ADF Bar Codes 2 - 39
When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data
from an application that uses symbol separators.
Multicode
2 - 40 Advanced Data Formatting Programmer Guide
Code Lengths
Scan these bar codes to define the number of characters the selected code type must contain. Select one
length per rule only. Do not select any code length to select code types of any length.
1 Character
2 Characters
ADF Bar Codes 2 - 41
3 Characters
4 Characters
2 - 42 Advanced Data Formatting Programmer Guide
5 Characters
6 Characters
ADF Bar Codes 2 - 43
7 Characters
8 Characters
2 - 44 Advanced Data Formatting Programmer Guide
9 Characters
10 Characters
ADF Bar Codes 2 - 45
11 Characters
12 Characters
2 - 46 Advanced Data Formatting Programmer Guide
13 Characters
14 Characters
ADF Bar Codes 2 - 47
15 Characters
16 Characters
2 - 48 Advanced Data Formatting Programmer Guide
17 Characters
18 Characters
ADF Bar Codes 2 - 49
19 Characters
20 Characters
2 - 50 Advanced Data Formatting Programmer Guide
21 Characters
22 Characters
ADF Bar Codes 2 - 51
23 Characters
24 Characters
2 - 52 Advanced Data Formatting Programmer Guide
25 Characters
26 Characters
ADF Bar Codes 2 - 53
27 Characters
28 Characters
2 - 54 Advanced Data Formatting Programmer Guide
29 Characters
30 Characters
ADF Bar Codes 2 - 55
• ≠
• <
• >
• range
• or
1. Scan one of the following bar codes to define the number of characters with which to compare the selected
code type.
2. Using the numeric keypad bar codes beginning on page 2-61, enter the bar code length value by scanning
1, 2, or 3 two-digit numbers representing the length(s). If necessary, use a leading zero. Valid length value
is 01 ~ 99.
==
>
2 - 56 Advanced Data Formatting Programmer Guide
<
!=
ADF Bar Codes 2 - 57
Up to 3 “==”
2. Scan the bar codes representing the desired character or characters (up to a total of 8) using the
Alphanumeric Keyboard on page 2-311.
2. Enter a location by scanning a two-digit number representing the position (use a leading “zero” if
necessary) using the Numeric Keypad on page 2-61.
3. Scan the bar codes representing the desired character or characters (up to a total of 8) using the
Alphanumeric Keyboard on page 2-311.
2. Scan the bar codes representing the desired character or characters (up to a total of 10) using the
Alphanumeric Keyboard on page 2-311.
String Criteria
1. Select one of the following criteria: Specific String at Start on page 2-58, Specific String, Any Location on
page 2-59, or Specific String Search (not supported by all devices) on page 2-59.
2. Scan the bar codes representing the desired character or characters using the Alphanumeric Keyboard on
page 2-311.
3. Scan String Delimiter below, and repeat Step 2 above to input up to three strings.
String Delimiter
4. At the end of the string(s) input, scan the End of Message bar code on page 2-344.
Any Message OK
Do not scan a bar code to format all selected code types, regardless of information contained.
ADF Bar Codes 2 - 61
Numeric Keypad
Do not confuse bar codes on this page with those on the alphanumeric keyboard.
1
2 - 62 Advanced Data Formatting Programmer Guide
3
ADF Bar Codes 2 - 63
5
2 - 64 Advanced Data Formatting Programmer Guide
7
ADF Bar Codes 2 - 65
9
2 - 66 Advanced Data Formatting Programmer Guide
Cancel
ADF Bar Codes 2 - 67
Actions
Select how to format the data for transmission.
NOTE If specifying a bar code encoding scheme in the ADF rule, ensure the encoding scheme is the first action
in order to ensure the UTF-8 bar code is converted before the rules apply. See Bar Code Encoding
Scheme Specification (Code Pages) on page 2-282.
Send Data
Send all data that follows, send all data up to a specific character selected from the Alphanumeric Keyboard on
page 2-311, or send the next X characters. Note that only bar codes for Send Next 1 to 20 appear here, and
can be scanned multiple times to send values greater then 20. For instance, to send the next 28 characters,
scan Send Next 20 Characters, then Send Next 8 Characters.
Setup Field(s)
Move Cursor
Move Cursor To a Character Scan Move Cursor To Character, then any printable ASCII 2-81
character from the Alphanumeric Keyboard on page 2-311. This
moves the cursor to the position after the matching character. If
the character is not there, the rule fails and ADF tries the next
rule.
Move Cursor to Start of Data Scan this bar code to move cursor to the beginning of the data. 2-82
Move Cursor Past a Character This action moves the cursor past all sequential occurrences of a 2-82
selected character. For example, if the selected character is ‘A’,
then the cursor moves past ‘A’, ‘AA’, ‘AAA’, etc. Scan Move
Cursor Past Character, then select a character from the
Alphanumeric Keyboard. If the character is not there, the cursor
does not move (i.e., has no effect).
Move Cursor Past a Specific This action moves the cursor past the first occurrence of a 2-83
String* selected string. Scan Move Cursor Past Specific String (not
supported by all devices), then select the character(s) (up to 10)
using the Alphanumeric Keyboard. Scan the End of Message
bar code on page 2-344.
Move Cursor to Specific String This action moves the cursor to the first occurrence of a selected 2-83
and Replace* string and replaces the string with another user-defined string.
Scan Move Cursor to Specific String and Replace (not
supported by all devices), then enter an alphanumeric string
representing the character(s) (up to 10) to match and delete using
the Alphanumeric Keyboard. Scan the End of Message bar code
on page 2-344. Enter another alphanumeric string representing
the character(s) (up to 10) to insert using the Alphanumeric
Keyboard. Scan End of Message.
Move Cursor to Last This action replaces all occurrences of a selected string with 2-84
Occurrence of String and another user-defined string, and moves the cursor to the
Replace All* beginning of the last occurrence. Scan Move Cursor to Last
Occurrence of String and Replace All (not supported by all
devices), then enter an alphanumeric string representing the
character(s) (up to 10) to match and delete using the
Alphanumeric Keyboard. Scan the End of Message bar code on
page 2-344. Enter another alphanumeric string representing the
character(s) (up to 10) to insert using the Alphanumeric
Keyboard. Scan End of Message.
Skip to End* Scan Skip to End (not supported by all devices) to move cursor 2-84
to the end of the data.
Skip Ahead “N” Characters Scan one of these bar codes to select the number of positions 2-86
ahead to move the cursor.
Skip Back “N” Characters Scan one of these bar codes to select the number of positions 2-91
back to move the cursor.
Send Preset Value Send Values 1 through 6 by scanning the appropriate bar code. 2-91
Set these values using the prefix/suffix values in the scanner’s
Product Reference Guide.
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
Move Cursor
Scan one of the following bar codes to move the cursor in relation to a specified character. Then enter a
character by scanning a bar code from the Alphanumeric Keyboard on page 2-311.
NOTE If there is no match and the rule fails, the next rule is checked.
Skip to End
(not supported by all devices)
ADF Bar Codes 2 - 85
Send Pause
Scan the bar code below to insert a pause in the transmission of data. Pause Duration on page 2-4 controls the
length of this pause.
Send Pause
2 - 86 Advanced Data Formatting Programmer Guide
Skip Ahead
Use the following bar codes to skip ahead characters.
Skip Back
Use the following bar codes to skip back characters.
Send Prefix
Send Suffix
ADF Bar Codes 2 - 97
Modify Data
Modify data as described below. The following actions work for all send commands that follow it within a rule.
Programming pad zeros to length 6, send next 3 characters, stop padding, send next 5 characters adds three
zeros to the first send, and the next send is unaffected by the padding. These options do not apply to the Send
Keystroke or Send Preset Value options.
Beeps
Select a beep sequence for each ADF rule.
Beep Once
Beep Twice
ADF Bar Codes 2 - 133
Beeps (continued)
Select a beep sequence for each ADF rule.
Send Control 2
Send Control A
ADF Bar Codes 2 - 135
Send Control B
Send Control C
2 - 136 Advanced Data Formatting Programmer Guide
Send Control D
Send Control E
ADF Bar Codes 2 - 137
Send Control F
Send Control G
2 - 138 Advanced Data Formatting Programmer Guide
Send Control H
Send Control I
ADF Bar Codes 2 - 139
Send Control J
Send Control K
2 - 140 Advanced Data Formatting Programmer Guide
Send Control L
Send Control M
ADF Bar Codes 2 - 141
Send Control N
Send Control O
2 - 142 Advanced Data Formatting Programmer Guide
Send Control P
Send Control Q
ADF Bar Codes 2 - 143
Send Control R
Send Control S
2 - 144 Advanced Data Formatting Programmer Guide
Send Control T
Send Control U
ADF Bar Codes 2 - 145
Send Control V
Send Control W
2 - 146 Advanced Data Formatting Programmer Guide
Send Control X
Send Control Y
ADF Bar Codes 2 - 147
Send Control Z
Send Control [
2 - 148 Advanced Data Formatting Programmer Guide
Send Control \
Send Control ]
ADF Bar Codes 2 - 149
Send Control 6
Send Control -
2 - 150 Advanced Data Formatting Programmer Guide
Keyboard Characters
Scan a Send bar code for the keyboard characters to send.
Send Space
Send !
ADF Bar Codes 2 - 151
Send “
Send #
2 - 152 Advanced Data Formatting Programmer Guide
Send $
Send %
ADF Bar Codes 2 - 153
Send &
Send ‘
2 - 154 Advanced Data Formatting Programmer Guide
Send (
Send )
ADF Bar Codes 2 - 155
Send *
Send +
2 - 156 Advanced Data Formatting Programmer Guide
Send ,
Send -
ADF Bar Codes 2 - 157
Send .
Send /
2 - 158 Advanced Data Formatting Programmer Guide
Send 0
Send 1
ADF Bar Codes 2 - 159
Send 2
Send 3
2 - 160 Advanced Data Formatting Programmer Guide
Send 4
Send 5
ADF Bar Codes 2 - 161
Send 6
Send 7
2 - 162 Advanced Data Formatting Programmer Guide
Send 8
Send 9
ADF Bar Codes 2 - 163
Send :
Send ;
2 - 164 Advanced Data Formatting Programmer Guide
Send <
Send =
ADF Bar Codes 2 - 165
Send >
Send ?
2 - 166 Advanced Data Formatting Programmer Guide
Send @
Send A
ADF Bar Codes 2 - 167
Send B
Send C
2 - 168 Advanced Data Formatting Programmer Guide
Send D
Send E
ADF Bar Codes 2 - 169
Send F
Send G
2 - 170 Advanced Data Formatting Programmer Guide
Send H
Send I
ADF Bar Codes 2 - 171
Send J
Send K
2 - 172 Advanced Data Formatting Programmer Guide
Send L
Send M
ADF Bar Codes 2 - 173
Send N
Send O
2 - 174 Advanced Data Formatting Programmer Guide
Send P
Send Q
ADF Bar Codes 2 - 175
Send R
Send S
2 - 176 Advanced Data Formatting Programmer Guide
Send T
Send U
ADF Bar Codes 2 - 177
Send V
Send W
2 - 178 Advanced Data Formatting Programmer Guide
Send X
Send Y
ADF Bar Codes 2 - 179
Send Z
Send [
2 - 180 Advanced Data Formatting Programmer Guide
Send \
Send ]
ADF Bar Codes 2 - 181
Send ^
Send _
2 - 182 Advanced Data Formatting Programmer Guide
Send `
Send a
ADF Bar Codes 2 - 183
Send b
Send c
2 - 184 Advanced Data Formatting Programmer Guide
Send d
Send e
ADF Bar Codes 2 - 185
Send f
Send g
2 - 186 Advanced Data Formatting Programmer Guide
Send h
Send i
ADF Bar Codes 2 - 187
Send j
Send k
2 - 188 Advanced Data Formatting Programmer Guide
Send l
Send m
ADF Bar Codes 2 - 189
Send n
Send o
2 - 190 Advanced Data Formatting Programmer Guide
Send p
Send q
ADF Bar Codes 2 - 191
Send r
Send s
2 - 192 Advanced Data Formatting Programmer Guide
Send t
Send u
ADF Bar Codes 2 - 193
Send v
Send w
2 - 194 Advanced Data Formatting Programmer Guide
Send x
Send y
ADF Bar Codes 2 - 195
Send z
Send {
2 - 196 Advanced Data Formatting Programmer Guide
Send |
Send }
ADF Bar Codes 2 - 197
Send ~
2 - 198 Advanced Data Formatting Programmer Guide
Send Alt 2
Send Alt A
ADF Bar Codes 2 - 199
Send Alt B
Send Alt C
2 - 200 Advanced Data Formatting Programmer Guide
Send Alt D
Send Alt E
ADF Bar Codes 2 - 201
Send Alt F
Send Alt G
2 - 202 Advanced Data Formatting Programmer Guide
Send Alt H
Send Alt I
ADF Bar Codes 2 - 203
Send Alt J
Send Alt K
2 - 204 Advanced Data Formatting Programmer Guide
Send Alt L
Send Alt M
ADF Bar Codes 2 - 205
Send Alt N
Send Alt O
2 - 206 Advanced Data Formatting Programmer Guide
Send Alt P
Send Alt Q
ADF Bar Codes 2 - 207
Send Alt R
Send Alt S
2 - 208 Advanced Data Formatting Programmer Guide
Send Alt T
Send Alt U
ADF Bar Codes 2 - 209
Send Alt V
Send Alt W
2 - 210 Advanced Data Formatting Programmer Guide
Send Alt X
Send Alt Y
ADF Bar Codes 2 - 211
Send Alt Z
Send Alt [
2 - 212 Advanced Data Formatting Programmer Guide
Send Alt \
Send Alt ]
ADF Bar Codes 2 - 213
Send Alt @
Send Alt -
2 - 214 Advanced Data Formatting Programmer Guide
Send Keypad *
Send Keypad +
ADF Bar Codes 2 - 215
Send Keypad -
Send Keypad .
2 - 216 Advanced Data Formatting Programmer Guide
Send Keypad /
Send Keypad 0
ADF Bar Codes 2 - 217
Send Keypad 1
Send Keypad 2
2 - 218 Advanced Data Formatting Programmer Guide
Send Keypad 3
Send Keypad 4
ADF Bar Codes 2 - 219
Send Keypad 5
Send Keypad 6
2 - 220 Advanced Data Formatting Programmer Guide
Send Keypad 7
Send Keypad 8
ADF Bar Codes 2 - 221
Send Keypad 9
Send F1 Key
Send F2 Key
ADF Bar Codes 2 - 233
Send F3 Key
Send F4 Key
2 - 234 Advanced Data Formatting Programmer Guide
Send F5 Key
Send F6 Key
ADF Bar Codes 2 - 235
Send F7 Key
Send F8 Key
2 - 236 Advanced Data Formatting Programmer Guide
Send F9 Key
Send GUI 0
Send GUI 1
ADF Bar Codes 2 - 261
Send GUI 2
Send GUI 3
2 - 262 Advanced Data Formatting Programmer Guide
Send GUI 4
Send GUI 5
ADF Bar Codes 2 - 263
Send GUI 6
Send GUI 7
2 - 264 Advanced Data Formatting Programmer Guide
Send GUI 8
Send GUI 9
ADF Bar Codes 2 - 265
Send GUI A
Send GUI B
2 - 266 Advanced Data Formatting Programmer Guide
Send GUI C
Send GUI D
ADF Bar Codes 2 - 267
Send GUI E
Send GUI F
2 - 268 Advanced Data Formatting Programmer Guide
Send GUI G
Send GUI H
ADF Bar Codes 2 - 269
Send GUI I
Send GUI J
2 - 270 Advanced Data Formatting Programmer Guide
Send GUI K
Send GUI L
ADF Bar Codes 2 - 271
Send GUI M
Send GUI N
2 - 272 Advanced Data Formatting Programmer Guide
Send GUI O
Send GUI P
ADF Bar Codes 2 - 273
Send GUI Q
Send GUI R
2 - 274 Advanced Data Formatting Programmer Guide
Send GUI S
Send GUI T
ADF Bar Codes 2 - 275
Send GUI U
Send GUI V
2 - 276 Advanced Data Formatting Programmer Guide
Send GUI W
Send GUI X
ADF Bar Codes 2 - 277
Send GUI Y
Send GUI Z
2 - 278 Advanced Data Formatting Programmer Guide
For example:
Send LEFT CTRL + SEND LEFT ALT + Send Delete Key outputs Ctrl+Alt+Del to the host;
Send LEFT CTRL + Send a outputs CTRL + a.
NOTE If specifying an encoding scheme, ensure it is the first action in the ADF rule to ensure the UTF-8 bar code
is converted before the rules apply.
Windows 1250
Latin 2, Central Europe
Windows 1251
Cyrillic, Slavic
ADF Bar Codes 2 - 283
Windows 1252
Latin 1, Western European
Windows 1253
Greek
2 - 284 Advanced Data Formatting Programmer Guide
Windows 1254
Latin 5, Turkish
Windows 1255
Hebrew
ADF Bar Codes 2 - 285
Windows 1256
Arabic
Windows 1257
Baltic
2 - 286 Advanced Data Formatting Programmer Guide
Windows 1258
Vietnamese
Windows 874
Thai
ADF Bar Codes 2 - 287
Windows 20866
Cyrillic KOI8-R
Windows 932
Japanese Shift-JIS
2 - 288 Advanced Data Formatting Programmer Guide
Windows 936
Simplified Chinese GBK
Windows 54936
Simplified Chinese GB18030
ADF Bar Codes 2 - 289
Windows 949
Korean Hangul
Windows 950
Traditional Chinese Big5
2 - 290 Advanced Data Formatting Programmer Guide
Mac CP10000
Mac Roman
ADF Bar Codes 2 - 291
MS-DOS 437
Latin US
MS-DOS 737
Greek
2 - 292 Advanced Data Formatting Programmer Guide
MS-DOS 775
Baltic
MS-DOS 850
Latin 1
ADF Bar Codes 2 - 293
MS-DOS 852
Latin 2
MS-DOS 855
Cyrillic
2 - 294 Advanced Data Formatting Programmer Guide
MS-DOS 857
Turkish
MS-DOS 860
Portuguese
ADF Bar Codes 2 - 295
MS-DOS 861
Icelandic
MS-DOS 862
Hebrew
2 - 296 Advanced Data Formatting Programmer Guide
MS-DOS 863
French Canada
MS-DOS 865
Nordic
ADF Bar Codes 2 - 297
MS-DOS 866
Cyrillic
MS-DOS 869
Greek 2
2 - 298 Advanced Data Formatting Programmer Guide
ISO 8859-1
Latin 1, Western European
ISO 8859-2
Latin 2, Central European
ADF Bar Codes 2 - 299
ISO 8859-3
Latin 3, South European
ISO 8859-4
Latin 4, North European
2 - 300 Advanced Data Formatting Programmer Guide
ISO 8859-5
Cyrillic
ISO 8859-6
Arabic
ADF Bar Codes 2 - 301
ISO 8859-7
Greek
ISO 8859-8
Hebrew
2 - 302 Advanced Data Formatting Programmer Guide
ISO 8859-9
Latin 5, Turkish
ISO 8859-10
Latin 6, Nordic
ADF Bar Codes 2 - 303
ISO 8859-11
Thai
ISO 8859-13
Latin 7, Baltic
2 - 304 Advanced Data Formatting Programmer Guide
ISO 8859-14
Latin 8, Celtic
ISO 8859-15
Latin 9
ADF Bar Codes 2 - 305
ISO 8859-16
Latin 10, South-Eastern European
UTF-8
UTF-16_LE
UTF-16 Little Endian
UTF-16_BE
UTF-16 Big Endian
Alphanumeric Keyboard
Space
#
2 - 312 Advanced Data Formatting Programmer Guide
%
ADF Bar Codes 2 - 313
+
2 - 314 Advanced Data Formatting Programmer Guide
-
(Dash)
.
ADF Bar Codes 2 - 315
,
(Comma)
/
2 - 316 Advanced Data Formatting Programmer Guide
“
ADF Bar Codes 2 - 317
&
‘
(Single Close Quote)
2 - 318 Advanced Data Formatting Programmer Guide
)
ADF Bar Codes 2 - 319
;
2 - 320 Advanced Data Formatting Programmer Guide
<
=
ADF Bar Codes 2 - 321
>
?
2 - 322 Advanced Data Formatting Programmer Guide
[
ADF Bar Codes 2 - 323
]
2 - 324 Advanced Data Formatting Programmer Guide
_
(Underscore)
ADF Bar Codes 2 - 325
`
(Single Open Quote)
2 - 326 Advanced Data Formatting Programmer Guide
NOTE Do not confuse the numeric bar codes in this section with those on the numeric keypad.
1
ADF Bar Codes 2 - 327
NOTE Do not confuse the numeric bar codes in this section with those on the numeric keypad.
3
2 - 328 Advanced Data Formatting Programmer Guide
NOTE Do not confuse the numeric bar codes in this section with those on the numeric keypad.
5
ADF Bar Codes 2 - 329
NOTE Do not confuse the numeric bar codes in this section with those on the numeric keypad.
7
2 - 330 Advanced Data Formatting Programmer Guide
NOTE Do not confuse the numeric bar codes in this section with those on the numeric keypad.
9
ADF Bar Codes 2 - 331
B
2 - 332 Advanced Data Formatting Programmer Guide
D
ADF Bar Codes 2 - 333
F
2 - 334 Advanced Data Formatting Programmer Guide
H
ADF Bar Codes 2 - 335
J
2 - 336 Advanced Data Formatting Programmer Guide
L
ADF Bar Codes 2 - 337
N
2 - 338 Advanced Data Formatting Programmer Guide
P
ADF Bar Codes 2 - 339
R
2 - 340 Advanced Data Formatting Programmer Guide
T
ADF Bar Codes 2 - 341
V
2 - 342 Advanced Data Formatting Programmer Guide
X
ADF Bar Codes 2 - 343
Z
2 - 344 Advanced Data Formatting Programmer Guide
Cancel
End of Message
ADF Bar Codes 2 - 345
b
2 - 346 Advanced Data Formatting Programmer Guide
d
ADF Bar Codes 2 - 347
f
2 - 348 Advanced Data Formatting Programmer Guide
h
ADF Bar Codes 2 - 349
j
2 - 350 Advanced Data Formatting Programmer Guide
l
ADF Bar Codes 2 - 351
n
2 - 352 Advanced Data Formatting Programmer Guide
p
ADF Bar Codes 2 - 353
r
2 - 354 Advanced Data Formatting Programmer Guide
t
ADF Bar Codes 2 - 355
v
2 - 356 Advanced Data Formatting Programmer Guide
x
ADF Bar Codes 2 - 357
z
2 - 358 Advanced Data Formatting Programmer Guide
|
ADF Bar Codes 2 - 359
~
2 - 360 Advanced Data Formatting Programmer Guide
INDEX
A ADF
example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-69 using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
bar code encoding scheme . . . . . . . . . . . . . . 2-282 alphanumeric keyboard . . . . . . . . . . . . . . . . . . . . . 2-311
beeps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-132 cancel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-344
erase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 capital letters . . . . . . . . . . . . . . . . . . . . . . . . . . 2-331
example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 end of message . . . . . . . . . . . . . . . . . . . . . . . . 2-344
modify data . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-97 lower case letters . . . . . . . . . . . . . . . . . . . . . . 2-345
move cursor . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-81 numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-326
move cursor past a character . . . . . . . . . . 2-80, 2-82 alt characters, sending . . . . . . . . . . . . . . . . . . . . . . 2-198
move cursor to a character . . . . . . . . . . . . 2-80, 2-81 alternate rule sets . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
move cursor to last occurrence
of string and replace . . . . . . . . . . 2-80, 2-84
move cursor to past a string . . . . . . . . . . . 2-80, 2-83 B
move cursor to start of data . . . . . . . . . . . 2-80, 2-82 bar code encoding scheme . . . . . . . . . . . . . . . . . . 2-282
move cursor to string and replace . . . . . . 2-80, 2-83 bar code reference table . . . . . . . . . . . . . . . . . . . . . . 2-1
pad with spaces . . . . . . . . . . . . . . . . . . . . . . . 2-100 beeper indications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
pad with zeros . . . . . . . . . . . . . . . . . . . . . . . . 2-116 beeps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-132
send alt characters . . . . . . . . . . . . . . . . . . . . . 2-198 begin new rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
send control characters . . . . . . . . . . . . . . . . . 2-134
send custom key . . . . . . . . . . . . . . . . . . . . . . . 2-278
send data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-69 C
send function key . . . . . . . . . . . . . . . . . . . . . . 2-232
cancel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-66
send GUI characters . . . . . . . . . . . . . . . . . . . . 2-260
code length compare . . . . . . . . . . . . . . . . . . . . . . . . 2-55
send keyboard characters . . . . . . . . . . . . . . . 2-150
code lengths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-40
send keypad characters . . . . . . . . . . . . . . . . . 2-214
code pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-282
send pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-85
code types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
send preset value . . . . . . . . . . . . . . . . . . . 2-81, 2-96
Australian postal . . . . . . . . . . . . . . . . . . . . . . . . 2-27
send right control key . . . . . . . . . . . . . . . . . . . 2-259
Aztec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-34
setup fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-80
Aztec rune . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-35
skip ahead . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-81
bookland ean . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20
skip ahead characters . . . . . . . . . . . . . . . . . . . 2-86
Chinese 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23
skip back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-81
codabar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
skip back characters . . . . . . . . . . . . . . . . . . . . . 2-91
code 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21
skip to end . . . . . . . . . . . . . . . . . . . . . . . . 2-80, 2-84
code 128 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13
turn off rule sets . . . . . . . . . . . . . . . . . . . . . . . 2-309
code 32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21
turn on rule sets . . . . . . . . . . . . . . . . . . . . . . . 2-307
code 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
Index - 2 Advanced Data Formatting Programmer Guide
T
turn off rule sets . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-309
turn on rule sets . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-307
U
using ADF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com
Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions
worldwide. All other trademarks are the property of their respective owners.