Beruflich Dokumente
Kultur Dokumente
1 This sheet covers the evaluation of limiting value for crackwidth due to Restraint cracking condition UNDE
2 The Limiting Crackwidth value (calculated), is then compared with the actual crackwidth value calculated b
analysis results (moment) under short term (3 days) condition.
3 If in case, the actual crackwidth value exceeds the limiting crackwidth value, then the A smin has to be check
4 Following the modified reinforcement value, the actual crackwidth has to be calculated for comparison wi
5 BOTH ACTUAL CRACKWIDTH AND LIMITING CRACKWIDTH CALCULATION HAS TO BE BASED ON SHORT TER
acking condition UNDER SHORT TERM CONDITION.
width value calculated based on Self-weight
he provided reinforcement
Early Thermal Cracking Check * Key in values in the highlighted cells only
Material Properties:
Conc. Grade, fcu = 32 N/mm2
Steel Grade fy = 500 N/mm2
Elastic Mod Es = 200000 N/mm2
Section Details
Slab Thickness = 750 mm
Clear Cover, C = 100 mm
Width of the slab = 1000 mm
Reinf. Area
Layer Dia (mm) Spacing
(mm) (mm2)
Reinforcement Provided - 5362 sq.mm >
1 32 150 5362 Reinforcement Required - 3515 sq.mm, Henc
Total 5362
75 < 800 mm
onset to cracking